EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   General::News (https://www.eqemulator.org/forums/forumdisplay.php?f=594)
-   -   Windows Server Repack (EQEmu Akka's PEQ Repack) (https://www.eqemulator.org/forums/showthread.php?t=38836)

Akkadius 09-28-2014 04:40 PM

Quote:

Originally Posted by ZionPhoenixGM (Post 234285)
Im having this really nasty issue where the installer runs every time my windows starts up. Essentially I wanted to just check out the pack but when it tried to turn the first time it couldnt find some files. So i figured ok it was just a fluke Ill try it later. I deleted all the files but the installer will not go away and I cant get rid of it and it is pretty annoying to have this updater run everytime my computer starts.

Any clues Akkadius?

Also one other issue is when the installer goes to execute I get "Error 1306" Another application has exclusive access to the file "C:\Program Files\MariaDB 10.0\data\mysql\innodb_index_stats.ibd". Nothing else is running on my computer that would access that file. This is the reason I tried to delete everything and start over but the issue above and this issue are preventing me from starting clean

Now it is impossible to open any .rars or .zips the installer has hijacked the functionality of "unpacking" and I cant even unzip other files. This is so annoying, how to do i get rid of this thing..

P.S. Thanks for the setup of the pack, cant wait to try it out after I resolve this installer thingy

OS Version helps to know what you're dealing with.

Typically the installer will run every-time windows starts up if it is not meeting a condition it is trying to perform.

Do you have any conflicting installs? Cause if you have individual components loaded it could conflict.

When it is trying to access that file, it is most likely that MariaDB (MySQL) Service is already started and has that file open, try shutting off the service and hitting 'Retry' on the installer to let it do its thing.

The other note is that the installer creates a restore point on your system if you have it enabled so if you wanted to go back to before when it was installed you should be able to do that as well.

Let me know if any of this helps you.

Tirkaz 09-28-2014 05:34 PM

Akkadius,

#bots don't seem to work - is this something that is easily enabled or disabled?

thank you!

Akkadius 09-28-2014 05:36 PM

Quote:

Originally Posted by Tirkaz (Post 234305)
Akkadius,

#bots don't seem to work - is this something that is easily enabled or disabled?

thank you!

Bots are not part of the repack, sorry.

A separate repack would have to be made and bots are a huge headache from a stability standpoint.

Uleat 09-28-2014 05:50 PM

Does the repack install everything you need to run the server, then allow you to download the git repo and proper dependencies
to compile your own custom binaries?

Akkadius 09-28-2014 05:54 PM

Quote:

Originally Posted by Uleat (Post 234307)
Does the repack install everything you need to run the server, then allow you to download the git repo and proper dependencies
to compile your own custom binaries?

It installs everything mentioned on the Wiki page, you can put your own binaries in place (AFTER INSTALL) if you feel you are experienced enough to do so. For folks who are uncomfortable with upgrading I advise against it until upgrade suggestions are posted on the repack page.

Tirkaz 09-28-2014 06:07 PM

Quote:

Originally Posted by Akkadius (Post 234306)
Bots are not part of the repack, sorry.

A separate repack would have to be made and bots are a huge headache from a stability standpoint.

Fair enough :grin:

Thanks!

vindr3d 09-29-2014 03:36 PM

Thank you
 
I just wanted to say thank you for doing this. I was having a nightmare with character tables not showing up and finally got to the point where I fixed it but then other character tables weren't there and I had finally given up.

This made my life so much easier. I really appreciate your hard work in putting this together.


Just and fyi, it said I was missing the perl files, so I downloaded the most recent and installed it. This fixed the problem and server is running perfectly!


Again, thank you very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ZionPhoenixGM 09-29-2014 03:57 PM

Quote:

Originally Posted by Akkadius (Post 234299)
OS Version helps to know what you're dealing with.

Typically the installer will run every-time windows starts up if it is not meeting a condition it is trying to perform.

Do you have any conflicting installs? Cause if you have individual components loaded it could conflict.

When it is trying to access that file, it is most likely that MariaDB (MySQL) Service is already started and has that file open, try shutting off the service and hitting 'Retry' on the installer to let it do its thing.

The other note is that the installer creates a restore point on your system if you have it enabled so if you wanted to go back to before when it was installed you should be able to do that as well.

Let me know if any of this helps you.

Hey Akkadius,

So I am on Windows 8.1 64bit.

I did discover the system restore point and went back to that. Maybe things broke when I tried to run the server before it was actually configured and that caused things to break.


The most frustrating/odd part of this was the installer would run when I was just opening a .zip/.rar file thus overwritting my unpack.

I will give your suggestions a shot tonight and get back to you.

Akkadius 09-29-2014 05:36 PM

Quote:

Originally Posted by vindr3d (Post 234345)
I just wanted to say thank you for doing this. I was having a nightmare with character tables not showing up and finally got to the point where I fixed it but then other character tables weren't there and I had finally given up.

This made my life so much easier. I really appreciate your hard work in putting this together.


Just and fyi, it said I was missing the perl files, so I downloaded the most recent and installed it. This fixed the problem and server is running perfectly!


Again, thank you very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

What do you mean missing Perl files? It should have already had the latest.

Akkadius 09-29-2014 05:37 PM

Quote:

Originally Posted by ZionPhoenixGM (Post 234347)
Hey Akkadius,

So I am on Windows 8.1 64bit.

I did discover the system restore point and went back to that. Maybe things broke when I tried to run the server before it was actually configured and that caused things to break.


The most frustrating/odd part of this was the installer would run when I was just opening a .zip/.rar file thus overwritting my unpack.

I will give your suggestions a shot tonight and get back to you.

Yeah when the installer has had some conflict, which could have been you already having WinRar installed, try even uninstalling WinRAR and running through the repack again.

Sure there is some pain to deal with but it is much less than what you will find trying to configure a server without issues.

lrincon 09-29-2014 05:49 PM

Hello, tried it on a different PC....works great! Thanks for all your hard work!

vindr3d 09-29-2014 06:00 PM

Quote:

Originally Posted by Akkadius (Post 234352)
What do you mean missing Perl files? It should have already had the latest.

It said it was missing some dll file. Was probably just a one time thing for me (go figure) haha but like I said everything is working perfectly now.

Akkadius 09-29-2014 06:15 PM

Quote:

Originally Posted by vindr3d (Post 234356)
It said it was missing some dll file. Was probably just a one time thing for me (go figure) haha but like I said everything is working perfectly now.

Yeah, needed to reboot and you hadn't.

vindr3d 09-29-2014 06:40 PM

Ah fair enough. I had done a fresh install of windows, so I wasn't sure when i had restarted.

*facepalm*

vindr3d 09-29-2014 07:28 PM

My friend is having problems connecting to the server. Any ideas? I have all the required ports forwarded and such.

It is telling him to run the patcher. I can connect just fine.


All times are GMT -4. The time now is 05:32 AM.

Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.