EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   Support::General Support (https://www.eqemulator.org/forums/forumdisplay.php?f=598)
-   -   Login Server in private Lan (https://www.eqemulator.org/forums/showthread.php?t=42758)

Soadin 12-29-2019 04:24 PM
Login Server in private Lan
 
Hi,

I have a problem setting up a local Login Server in my private Lan.

I attached the login.json and eqemu_config.json.

Status with these two files:
I can logon to Login Server but my EQ-Server is not shown on the Server list.
So it seems the Server doesnt Register correctly at the Login Server.
But log files don't show an error.

would the world log file show an error?
It says:
Code:
[12-29-2019 :: 20:34:30] [WorldServer] [Info] Connected to Legacy Loginserver: [192.168.0.175:5998]

would the login Server log file show an error? it doesn't atm. But also no success message.


Any tips ?
Many thx in Advance

eqemu_config.json
Code:
{
    "server" : {
          "chatserver" : {
              "host" : "",
              "port" : "7778"
          },
          "database" : {
              "db" : "peq",
              "host" : "localhost",
              "password" : "eqemu",
              "port" : "3306",
              "username" : "root"
          },
          "mailserver" : {
              "host" : "",
              "port" : "7778"
          },
          "qsdatabase" : {
              "db" : "peq",
              "host" : "localhost",
              "password" : "eqemu",
              "port" : "3306",
              "username" : "root"
          },
          "webinterface" : {
              "port" : "9081"
          },
          "world" : {
              "http" : {
                    "enabled" : "true",
                    "mimefile" : "mime.types",
                    "port" : "9080"
              },
              "key" : "rmJ0srnNuhFoLV4XtBVUwe2C3sLMZIL",
              "loginserver1" : {
                    "account" : "Admin",
                    "host" : "192.168.0.175",
                    "legacy" : "1",
                    "password" : "Password",
                    "port" : "5998"
              },
              "loginserver2" : {
                    "account" : "Admin",
                    "host" : "192.168.0.175",
                    "password" : "Password",
                    "port" : "5999"
              },
                          "localaddress" : "192.168.0.175",
              "longname" : "Soadin",
              "shortname" : "soadin",
              "tcp" : {
                    "ip" : "192.168.0.175",
                    "port" : "9001"
              },
              "telnet" : {
                    "enabled" : "true",
                    "ip" : "0.0.0.0",
                    "port" : "9000"
              }
          },
          "zones" : {
              "defaultstatus" : "20",
              "ports" : {
                    "high" : "7400",
                    "low" : "7000"
              }
          }
    }
}
Login.json
Code:
{
    "account" : {
          "auto_create_accounts" : true
    },
    "client_configuration" : {
          "sod_opcodes" : "login_opcodes_sod.conf",
          "sod_port" : 5999,
          "titanium_opcodes" : "login_opcodes.conf",
          "titanium_port" : 5998
    },
    "database" : {
          "db" : "peq",
          "host" : "127.0.0.1",
          "password" : "eqemu",
          "port" : "3306",
          "user" : "root"
    },
    "logging" : {
          "dump_packets_in" : false,
          "dump_packets_out" : false,
          "trace" : false,
          "world_trace" : false,
                  "local_network" : "192.168.0.0"
    },
    "security" : {
          "allow_password_login" : true,
          "allow_token_login" : true,
          "mode" : 14
    },
    "web_api" : {
          "enabled" : true,
          "port" : 6000
    },
    "worldservers" : {
          "reject_duplicate_servers" : false,
          "unregistered_allowed" : true
    }
}

Soadin 12-29-2019 04:49 PM
Some additional info:

I did check the database with
select * from login_world_servers;

and it showed the line with my world server.

I am using the ROF Client btw.

THx again for any tips or tricks :)

Uleat 12-29-2019 05:43 PM
This assumes that you don't want to connect to the public login server...

Code:
          "world" : {
              "http" : {
                    "enabled" : "true",
                    "mimefile" : "mime.types",
                    "port" : "9080"
              },
              "key" : "rmJ0srnNuhFoLV4XtBVUwe2C3sLMZIL",
              "loginserver1" : {
                    "account" : "Admin",
                    "host" : "192.168.0.175",
                    "password" : "Password",
                    "port" : "5998"
              },
              "localaddress" : "192.168.0.175",
              "longname" : "Soadin",
              "shortname" : "soadin",
              "tcp" : {
                    "ip" : "192.168.0.175",
                    "port" : "9001"
              },
              "telnet" : {
                    "enabled" : "true",
                    "ip" : "0.0.0.0",
                    "port" : "9000"
              }
          },
- Remove 'loginserver2'
- Remove 'legacy' from 'loginserver1'

Note: Don't change the port values to what you think the client is logging into..these are for server-to-server connections and have nothing to do with client login.

Soadin 12-29-2019 06:25 PM
Many many thx... that solved it.
Uleat you are my hero :)

/bow


All times are GMT -4. The time now is 07:42 PM.

Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.