EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   Support::MiniLogin (https://www.eqemulator.org/forums/forumdisplay.php?f=629)
-   -   Can anyone help me set up minilog in? (https://www.eqemulator.org/forums/showthread.php?t=35419)

kamaushi 06-16-2012 03:10 AM

Can anyone help me set up minilog in?
 
Trying to get someone to help me with minilog in any help would be great Gtalk name is Edblauvelt I cant not for the life of me figure out where to start...... or even where to do the sql querys read threw the setup guide and still no clue...* IM A HUGE NOOB TO THIS TYPE OF STUFF!!*

kamaushi 06-16-2012 03:50 AM

[Err] 1062 - Duplicate entry 'LoginType' for key 'PRIMARY'
[Err] INSERT INTO VARIABLES (varname, value, information) VALUES ('LoginType', 'Minilogin', 'Set this to Minilogin to login using a minilogin server :)');
[Msg] Finished - Unsuccessfully
--------------------------------------------------
Using Navicat lite I put this in my peq database and thats what i got when i ran the SQL file i made in Notepad++

kamaushi 06-16-2012 05:47 AM

Ok I figured it out to the point where it says need to set the <adress> element in the <world> section......... in world.exe I've set that in the XML file and the loginhost to what my computer shows as the ip in IPconfig in dos.........but still wont connect to anything............ all the addresses are correct......and it might help troubleshooting that i dont use a router and this computer wont be connected to the internet when i do play thats why im using mini login

kamaushi 06-16-2012 06:15 AM

The client connects no problem at all...........but the world refuses to connect to the minilogin.......

heres the loginserver from the mini login folder......

[LoginServer]
loginserver=127.0.0.1
loginserver2=
loginport=5999
loginport2=
worldname=
worldaddress=
locked=false
account=
password=

[WorldServer]
Defaultstatus=
Unavailzone=

[ChatChannelServer]
worldshortname=
chataddress=
chatport=

[LoginConfig]
ServerMode=minilogin
ServerPort=5999


and heres the XML file in the server folder.............

<?xml version="1.0">
<server>
<world>
<shortname>ejsepic</shortname>
<longname>ejs epic new server</longname>

<!-- Only specify these two if you really think you need to. (read: You don't) -->
<!-- <address>75.105.36.37</address> --> <~(I've had the address and the local address both the same didn't work this is the last configuration i tried and no this is not in my .xml file )
<!-- <localaddress>127.0.0.1</localaddress> -->

<!-- Loginserver information. Defaults shown -->
<loginserver>
<host>127.0.0.1</host>
<port>5999</port>
<account></account>
<password></password>
</loginserver>

<!-- Server status. Default is unlocked -->
<!--<locked/>-->
<!-- <unlocked/> -->

<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<tcp ip="localhost" port="9000" telnet="disable"/>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>1337</key>

<!-- Enable and set the port for the HTTP service. Defaults are shown -->
<http port="9080" enabled="false" mimefile="mime.types" />
</world>

<!-- Chatserver (channels) information. Defaults shown -->
<chatserver>
<host>channels.eqemulator.net</host>
<port>7778</port>
</chatserver>

<!-- Mailserver (in-game mail) information. Defaults shown -->
<mailserver>
<host>channels.eqemulator.net</host>
<port>7779</port>
</mailserver>

<zones>
<defaultstatus>20</defaultstatus>

<!-- Sets port range for world to use to auto configure zones -->
<ports low="7000" high="7100"/>
</zones>

<!-- Database configuration, replaces db.ini. Defaults shown -->
<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>bashim</password>
<db>peq</db>
</database>

<!-- Launcher Configuration -->
<launcher>
<!-- <logprefix>logs/zone-</logprefix> -->
<!-- <logsuffix>.log</logsuffix> -->
<!-- <exe>zone.exe or ./zone</exe> -->
<!-- <timers restart="10000" reterminate="10000"> -->
</launcher>

<!-- File locations. Defaults shown -->
<files>
<!-- <spells>spells_us.txt</spells> -->
<!-- <opcodes>opcodes.conf</opcodes> -->
<!-- <logsettings>log.ini</logsettings> -->
<!-- <eqtime>eqtime.cfg</eqtime> -->
</files>
<!-- Directory locations. Defaults shown -->
<directories>
<!-- <maps>Maps</maps> -->
<!-- <quests>quests</quests> -->
<!-- <plugins>plugins</plugins> -->
</directories>
</server>
..............
And a quick reminder I WILL NOT BE CONNECTED TO the INTERNET NOR do I HAVE a ROUTER

kamaushi 06-16-2012 06:26 AM

IM an idiot........... forgot to take the <--- out of the address lines like


change:

<!--<address>129.81.73.41</address>-->

to:

<address>129.81.73.41</address>

Assuming 129.81.73.41 is the address your world is running on.

http://www.eqemulator.org/forums/showthread.php?t=23747
CREDIT: Derision Title Developer


All times are GMT -4. The time now is 03:21 PM.

Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.