EQEmulator Forums - Server not receiving clients from the login server

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Support::Linux Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=588)

- - Server not receiving clients from the login server (https://www.eqemulator.org/forums/showthread.php?t=30453)

Server not receiving clients from the login server

I have tried both the public login and open source version of the login servers, so I'm assuming the problem lies in my eqemu server configuration.

When I log in, I get to server select and can see the server listed there. When I go to enter world, it loads for a while then boots me back to server select with the 'you may have to re run the update patch' message. This happens with both SoF and Titanium clients.

I'm running on ubuntu server 9.04 (or 9.10, don't remember). This is the output of ufw status:

Code:

$ sudo ufw status

Status: loaded



To                         Action  From

--                         ------  ----

22/tcp                     ALLOW   Anywhere

22/udp                     ALLOW   Anywhere

80/tcp                     ALLOW   Anywhere

80/udp                     ALLOW   Anywhere

Anywhere                   ALLOW   192.168.1.101

7000:7100/udp              ALLOW   Anywhere

9000/tcp                   ALLOW   Anywhere

25/tcp                     ALLOW   Anywhere

25/udp                     ALLOW   Anywhere

5999/tcp                   ALLOW   Anywhere

5999/udp                   ALLOW   Anywhere

22/tcp                     LIMIT   Anywhere

Anywhere                   ALLOW   192.168.1.104

192.168.1.104 is the IP of the server on the network, 192.168.1.101 is my main computer that I'm testing from.

edit: I remember in the past there were some log settings that detailed clients connecting to world. I'm not seeing that, or that logging isn't enabled.

If you're going to run your own log in server you need to use the "full" eqemu_config.xml file.

The following is my "ful" eqemu_config.xml file

Code:

<?xml version="1.0">

<server>

        <world>

                <shortname>Max</shortname>

                <longname>Maximillian</longname>



                <!-- Only specify these two if you really think you need to.  (read: You dont) -->

                <address>192.168.1.135</address>

                <localaddress>192.168.1.135</localaddress>



                <!-- Loginserver information.  Defaults shown -->

                <loginserver>

                        <host>192.168.1.135</host>

                        <port>5998</port>

                        <account>**YOUR INFO**</account>

                        <password>**YOUR INFO**</password>

                </loginserver>



                <!-- Server status.  Default is unlocked -->

                <unlocked/>



                <!-- Sets the ip/port for the tcp connections.  Both zones and console (if enabled).  Defaults are shown -->

                <tcp ip="192.168.1.135" port="9000" telnet="disable"/>



                <!-- Sets the shared key used by zone/launcher to connect to world -->

                <key>some long random string</key>

                

                <!-- Enable and set the port for the HTTP service.  Defaults are shown -->

                <http port="9080" enabled="false" mimefile="mime.types" />

        </world>



        <!-- Chatserver (channels) information.  Defaults shown -->

        <chatserver>

                <host>192.168.1.135</host>

                <port>7778</port>

        </chatserver>



        <!-- Mailserver (in-game mail) information.  Defaults shown -->

        <mailserver>

                <host>192.168.1.135</host>

                <port>7779</port>

        </mailserver>



        <zones>

                <defaultstatus>20</defaultstatus>



                <!-- Sets port range for world to use to auto configure zones -->

                <ports low="7000" high="7400"/>

        </zones>



        <!-- Database configuration, replaces db.ini.  Defaults shown -->

        <database>

                <host>localhost</host>

                <port>3306</port>

                <username>**YOUR INFO**</username>

                <password>**YOUR INFO**</password>

                <db>**YOUR INFO**</db>

        </database>



        <!-- Launcher Configuration -->

        <launcher>

                <!-- <logprefix>logs/zone-</logprefix> -->

                <!-- <logsuffix>.log</logsuffix> -->

                <!-- <exe>zone.exe or ./zone</exe> -->

                <!-- <timers restart="10000" reterminate="10000"> -->

        </launcher>



        <!-- File locations.  Defaults shown -->

        <files>

                <!-- <spells>spells_us.txt</spells> -->

                <!-- <opcodes>opcodes.conf</opcodes> -->

                <!-- <logsettings>log.ini</logsettings> -->

                <!-- <eqtime>eqtime.cfg</eqtime> -->

        </files>

        <!-- Directory locations.  Defaults shown -->

        <directories>

                <!-- <maps>Maps</maps> -->

                <!-- <quests>quests</quests> -->

                <!-- <plugins>plugins</plugins> -->

        </directories>

</server>

hope this helps

Yeah, I have done that. address is my host name, localaddress 192.168.1.104. I didn't post it since I can see that the login server is receiving connections okay, and the only other part of eqemu_config.xml that matters in this case is address and localaddress.

When I first setup my server, this is the section of the eqemu_config.xml file that prevented me from connecting to the server:

Code:

                <!-- Only specify these two if you really think you need to.  (read: You don't) -->

                <!-- <address>some.server.com</address> -->

                <!-- <localaddress>192.168.0.5</localaddress> -->

Specifically, I forgot to uncomment the <address> and <localaddress> lines

Alright, back working on this problem again. It seems I can log in on my LAN when I set both address and localaddress to 192.168.1.104 (its lan IP). I have tried the following:

Code:

<address>peterfyon.homeunix.com</address>

<localaddress>192.168.1.104</localaddress>

and my eqhost.txt set to both 192.168.1.104 and peterfyon.homeunix.com and

Code:

<address>peterfyon.homeunix.com</address>

<localaddress>peterfyon.homeunix.com</localaddress>

and setting eqhost.txt to peterfyon.homeunix.com. Neither of the above work.

when you was refering to this : detailed clients connecting to world
your refering to PEQUpdatePack-4.0-1124.exe as well as another file
was removed from downloads a few years ago EQEmu-0.7.0-1124.zip
all still works great chat with cavedude see if he still has them files
i still have them old tools and files great stuff to have at hand.

This below is what you was use to seeing
Login Server
Tcp Server
Ls_World
Ls_Server

i still have the sorce code files for this version. but others are saying they don't undstand what i'm trying to say.

I hope you can undstand what i'm trying to tell you but they broke the client.
might want to double check your server settings using EQEmuServerPack-Config-3.6.exe if you still have it around still works for changing the settings.

Comment: Working together gets you feather in life! 80)

You might want to see if setting your FQDN in your /etc/host file to your internal address and seeing if that helps. If so it would suggest that your resolver could be borked.

Quote:

Originally Posted by OscarGrouch05 (Post 184465)

Wait... what?

I think Oscar missed the bit about "Linux" in the forum title... but I don't think english is his 1st language, so be gentle with him/her.

Sigh, I am back trying to fix this, this time with a SoD client. Here's some more information.

Relevant output from the open source login server:

Code:

[Network] [04.27.10 - 16:12:30] New world server connection from 127.0.0.1:40350

[World] [04.27.10 - 16:12:30] Server Test(test) did not attempt to log in but unregistered servers are allowed.

[Network] [04.27.10 - 16:17:21] New SoD client connection from 111.111.111.111:5118

[Network] [04.27.10 - 16:17:21] Application packet recieved from client (size 14)

[Network] [04.27.10 - 16:17:21] Session ready recieved from client.

[Network] [04.27.10 - 16:17:22] Application packet recieved from client (size 28)

[Network] [04.27.10 - 16:17:22] Login recieved from client.

[Client] [04.27.10 - 16:17:22] User: pfyon

[Client] [04.27.10 - 16:17:22] Hash: a94a8fe5ccb19ba61c4c0873d391e987982fbbd3

[Network] [04.27.10 - 16:17:22] Application packet recieved from client (size 12)

[Network] [04.27.10 - 16:17:22] Server list request recieved from client.

[Network] [04.27.10 - 16:17:24] Application packet recieved from client (size 16)

[Network] [04.27.10 - 16:17:24] Play recieved from client, server number 3 sequence 5.

[Network Trace] [04.27.10 - 16:17:24] User-To-World Response recieved.

[Network] [04.27.10 - 16:17:25] Client disconnected from the server, removing client.

[Network] [04.27.10 - 16:18:26] New SoD client connection from 111.111.111.111:5145

[Network] [04.27.10 - 16:18:26] Application packet recieved from client (size 14)

[Network] [04.27.10 - 16:18:26] Session ready recieved from client.

[Network] [04.27.10 - 16:18:26] Application packet recieved from client (size 28)

[Network] [04.27.10 - 16:18:26] Login recieved from client.

[Client] [04.27.10 - 16:18:26] User: pfyon

[Client] [04.27.10 - 16:18:26] Hash: a94a8fe5ccb19ba61c4c0873d391e987982fbbd3

[Network] [04.27.10 - 16:18:27] Application packet recieved from client (size 12)

[Network] [04.27.10 - 16:18:27] Server list request recieved from client.

[Debug] Unable to convert EQ opcode 0x0003 to an Application opcode.

[Network] [04.27.10 - 16:18:31] Application packet recieved from client (size 12)

[Network Error] [04.27.10 - 16:18:31] Recieved unhandled application packet from the client opcode index 0



[Network] [04.27.10 - 16:18:31] Client disconnected from the server, removing client.

(Note: that's the first time I've seen the errors in a few trials, this time I clicked 'logout' on the server select screen instead of just pressing escape, so that could be the cause for those). I also removed the mildly personally identifying information from the logs.

Relevant output of eqemu_debug_world.log:

Code:

5947 [04.27. - 16:13:44] [WORLD__CONSOLE] New zoneserver #4 from 127.0.0.1:44217

5947 [04.27. - 16:13:44] [WORLD__CONSOLE] New zoneserver #5 from 127.0.0.1:44216

5947 [04.27. - 16:13:44] [WORLD__ZONE] [5] Zone started with name dynamic_05 by launcher zone

5947 [04.27. - 16:13:44] [WORLD__ZONE] [5] Auto zone port configuration.  Telling zone to use port 7001

5947 [04.27. - 16:13:44] [WORLD__ZONE] [4] Zone started with name dynamic_03 by launcher zone

5947 [04.27. - 16:13:44] [WORLD__ZONE] [4] Auto zone port configuration.  Telling zone to use port 7002

5947 [04.27. - 16:13:44] [WORLD__ZONE] [3] Zone started with name dynamic_04 by launcher zone

5947 [04.27. - 16:13:44] [WORLD__ZONE] [3] Auto zone port configuration.  Telling zone to use port 7003

5947 [04.27. - 16:13:44] [WORLD__ZONE] [2] Zone started with name dynamic_02 by launcher zone

5947 [04.27. - 16:13:44] [WORLD__ZONE] [2] Auto zone port configuration.  Telling zone to use port 7004

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] Recevied ServerPacket from LS OpCode 0x04x

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] 0000: 02 00 00 00 03 00 00 00 - 00 00 00 00 00 00 00 00  | ................

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] Recevied ServerPacket from LS OpCode 0x04x

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] 0000: 02 00 00 00 70 66 79 6f - 6e 00 00 00 00 00 00 00  | ....pfyon.......

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] 0016: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  | ................

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] 0032: 00 00 41 31 53 4a 43 50 - 43 36 50 4f 00 00 00 00  | ..A1SJCPC6PO....

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] 0048: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00  | ................

5947 [04.27. - 16:17:24] [WORLD__LS_TRACE] 0064: 00 00 00 63 f5 e8 95 00 -                          | ...c....

Here's the contents of my server folder:

Code:

-rw-rw-r-- 1 eqemu users   10781 2009-08-19 18:18 addcomments.sql

lrwxrwxrwx 1 eqemu users      21 2010-01-27 15:57 cleanipc -> source/utils/cleanipc

lrwxrwxrwx 1 eqemu users      33 2010-01-27 15:57 commands.pl -> source/utils/defaults/commands.pl

-rw-rw-r-- 1 eqemu users    7348 2010-04-27 14:33 crashlog

lrwxrwxrwx 1 eqemu users      21 2009-08-09 09:22 database -> ../peqdb/peqdatabase/

-rw-rw-r-- 1 eqemu users    2430 2010-04-27 15:44 eqemu_config.xml

lrwxrwxrwx 1 eqemu users      42 2010-04-27 16:03 eqemulogin.ini -> EQEmuLoginServer/login_util/eqemulogin.ini

lrwxrwxrwx 1 eqemu users      24 2010-04-26 19:39 EQEmuLoginServer -> source/EQEmuLoginServer/

lrwxrwxrwx 1 eqemu users      24 2010-01-27 15:58 eqlaunch -> source/eqlaunch/eqlaunch

-rw-rw-r-- 1 eqemu users      29 2010-04-27 16:12 eqtime.cfg

-rw-rw-r-- 1 eqemu users    4877 2009-08-20 11:22 import_spells.pl

lrwxrwxrwx 1 eqemu users      36 2010-01-27 15:59 libEMuShareMem.so -> source/EMuShareMem/libEMuShareMem.so

lrwxrwxrwx 1 eqemu users      29 2010-01-27 15:59 log.ini -> source/utils/defaults/log.ini

lrwxrwxrwx 1 eqemu users      35 2010-04-27 16:11 login_opcodes.conf -> EQEmuLoginServer/login_opcodes.conf

lrwxrwxrwx 1 eqemu users      26 2010-01-27 15:59 logs -> source/utils/defaults/logs

lrwxrwxrwx 1 eqemu users      16 2009-08-07 12:17 Maps -> ../peqmaps/Maps/

lrwxrwxrwx 1 eqemu users      32 2010-01-27 16:00 mime.types -> source/utils/defaults/mime.types

lrwxrwxrwx 1 eqemu users      27 2010-01-27 16:00 patch_6.2.conf -> source/utils/patch_6.2.conf

lrwxrwxrwx 1 eqemu users      35 2010-01-27 16:00 patch_Anniversary.conf -> source/utils/patch_Anniversary.conf

lrwxrwxrwx 1 eqemu users      28 2010-01-27 16:01 patch_Live.conf -> source/utils/patch_Live.conf

lrwxrwxrwx 1 eqemu users      27 2010-04-26 19:41 patch_SoD.conf -> source/utils/patch_SoD.conf

lrwxrwxrwx 1 eqemu users      27 2010-01-27 16:03 patch_SoF.conf -> source/utils/patch_SoF.conf

lrwxrwxrwx 1 eqemu users      32 2010-01-27 16:05 patch_Titanium.conf -> source/utils/patch_Titanium.conf

-rwxrw-r-x 1 eqemu users     213 2009-08-09 10:16 persist_world

lrwxrwxrwx 1 eqemu users      31 2010-01-27 16:05 plugin.pl -> source/utils/defaults/plugin.pl

lrwxrwxrwx 1 eqemu users      29 2010-01-27 16:05 plugins -> source/utils/defaults/plugins

lrwxrwxrwx 1 eqemu users      25 2009-08-07 22:03 quests -> ../peqquests/trunk/quests

lrwxrwxrwx 1 eqemu users      17 2010-01-25 22:09 source -> /home/eqemu/code/

-rw-rw-r-- 1 eqemu users 9434199 2007-09-27 10:45 spells_us.txt

-rwxrw-r-x 1 eqemu users     898 2009-08-09 10:15 start

-rwxrw-r-x 1 eqemu users     295 2009-08-21 23:36 stop

lrwxrwxrwx 1 eqemu users      31 2010-01-27 16:04 templates -> source/utils/defaults/templates

-rwxrw-r-x 1 eqemu users     150 2009-08-16 14:41 update

lrwxrwxrwx 1 eqemu users      18 2010-01-27 16:04 world -> source/world/world

lrwxrwxrwx 1 eqemu users      29 2010-01-27 16:04 worldui -> source/utils/defaults/worldui

lrwxrwxrwx 1 eqemu users      32 2010-01-27 16:05 worldui.pl -> source/utils/defaults/worldui.pl

lrwxrwxrwx 1 eqemu users      16 2010-01-27 16:05 zone -> source/zone/zone

And the content of my login server folder:

Code:

total 44712

-rw-r--r-- 1 eqemu users     9810 2010-04-26 14:34 Client.cpp

-rw-r--r-- 1 eqemu users     3349 2010-04-26 14:34 Client.h

-rw-r--r-- 1 eqemu users     4521 2010-04-26 14:34 ClientManager.cpp

-rw-r--r-- 1 eqemu users     2005 2010-04-26 14:34 ClientManager.h

-rw-r--r-- 1 eqemu users   132812 2010-04-26 14:36 ClientManager.o

-rw-r--r-- 1 eqemu users   108056 2010-04-26 14:36 Client.o

-rw-r--r-- 1 eqemu users     4677 2010-04-26 14:34 Config.cpp

-rw-r--r-- 1 eqemu users     2140 2010-04-26 14:34 Config.h

-rw-r--r-- 1 eqemu users   210504 2010-04-26 14:37 Config.o

-rw-r--r-- 1 eqemu users     2679 2010-04-26 14:34 Database.h

-rw-r--r-- 1 eqemu users     5926 2010-04-26 14:34 DatabaseMySQL.cpp

-rw-r--r-- 1 eqemu users     2988 2010-04-26 14:34 DatabaseMySQL.h

-rw-r--r-- 1 eqemu users   226624 2010-04-26 14:37 DatabaseMySQL.o

-rw-r--r-- 1 eqemu users     6417 2010-04-26 14:34 DatabasePostgreSQL.cpp

-rw-r--r-- 1 eqemu users     2836 2010-04-26 14:34 DatabasePostgreSQL.h

-rw-r--r-- 1 eqemu users     3329 2010-04-26 14:34 Encryption.cpp

-rw-r--r-- 1 eqemu users     3076 2010-04-26 14:34 Encryption.h

-rw-r--r-- 1 eqemu users     1167 2010-04-26 14:34 EQCryptoAPI.h

-rw-r--r-- 1 eqemu users     6209 2010-04-26 14:34 EQEmuDatabase.cpp

-rwxr-xr-x 1 eqemu users  9629414 2010-04-26 14:37 EQEmuLoginServer

-rw-r--r-- 1 eqemu users    11173 2010-04-26 14:34 EQEmuLoginServer.vcproj

-rw-r--r-- 1 eqemu users     2312 2010-04-26 14:34 ErrorLog.cpp

-rw-r--r-- 1 eqemu users     1958 2010-04-26 14:34 ErrorLog.h

-rw-r--r-- 1 eqemu users    19844 2010-04-26 14:37 ErrorLog.o

-rw-r--r-- 1 eqemu users 34357226 2010-01-15 18:28 libcryptopp.a

-rw-r--r-- 1 eqemu users   265026 2010-01-15 19:18 libEQEmuAuthCrypto.a

lrwxrwxrwx 1 eqemu users       20 2010-04-26 14:39 login.ini -> login_util/login.ini

lrwxrwxrwx 1 eqemu users       29 2010-04-26 14:39 login_opcodes.conf -> login_util/login_opcodes.conf

lrwxrwxrwx 1 eqemu users       33 2010-04-26 14:39 login_opcodes_sod.conf -> login_util/login_opcodes_sod.conf

-rw-r--r-- 1 eqemu users     1796 2010-04-26 14:34 LoginServer.h

-rw-r--r-- 1 eqemu users     3104 2010-04-26 14:34 LoginStructures.h

drwxr-xr-x 5 eqemu users     4096 2010-04-27 16:11 login_util

drwxr-xr-x 2 eqemu users     4096 2010-04-27 15:44 logs

-rw-r--r-- 1 eqemu users     7909 2010-04-26 14:34 Main.cpp

-rw-r--r-- 1 eqemu users   244124 2010-04-26 14:37 Main.o

-rw-r--r-- 1 eqemu users      684 2010-04-26 14:34 makefile

-rw-r--r-- 1 eqemu users      890 2010-04-26 14:34 makefile.common

-rw-r--r-- 1 eqemu users     4267 2010-04-26 14:34 Options.h

-rw-r--r-- 1 eqemu users     7919 2010-04-26 14:34 ServerManager.cpp

-rw-r--r-- 1 eqemu users     2358 2010-04-26 14:34 ServerManager.h

-rw-r--r-- 1 eqemu users   152372 2010-04-26 14:37 ServerManager.o

-rw-r--r-- 1 eqemu users    13290 2010-04-26 14:34 WorldServer.cpp

-rw-r--r-- 1 eqemu users     4132 2010-04-26 14:34 WorldServer.h

-rw-r--r-- 1 eqemu users   139348 2010-04-26 14:37 WorldServer.o

Relevant section of eqemu_config.xml:

Code:



                <!-- Only specify these two if you really think you need to.  (read: You don't) -->

                <address>peterfyon.homeunix.com</address>

                <localaddress>192.168.1.104</localaddress>



                <!-- Loginserver information.  Defaults shown -->

                <loginserver1>

                        <host>localhost</host>

                        <port>5997</port>

                        <account></account>

                        <password></password>

                </loginserver1>

And the only difference in the login server's login.ini from the defaults, aside from the db information, is:

Code:

listen_port = 5997

I am using the most recent version of the login server and eqemu server, compiled under ubuntu 8.10 (I believe) myself.

edit: Also, my eqhost.txt file is pointing at Host=peterfyon.homeunix.com:5999, and I'm sure there's a few unneeded files in the server folders by now.

edit2: I also updated my /etc/hosts file to direct the hostname to the internal IP.

Just out of curiosity, what happens if you set your eqhost.txt to

Host=peterfyon.homeunix.com:5997

or

Host=peterfyon.homeunix.com:5998

so you are using the same port as the loginserver is listening to?

I'd also try replacing all the "localhost" entries with the ip addresses (internal and/or external), just to see what difference that makes.

Changing the ip to the host name in any place didn't do anything, and listen_port is the port the login server listens on for connections from world servers.

In conclusion, still having that problem :(.

Does anyone have a log entry of a successful login from their eqemu_debug_world.log ?

Code:

                <loginserver1>

                        <host>localhost</host>

                        <port>5997</port>

                        <account></account>

                        <password></password>

                </loginserver1>

Is that correct? I have the hostname of the machine in there, not localhost.

I also have an account and password, though I can't remember what account that refers to :).