The first thing is that your eqhost should be set to 5998 for a titanium client. I noticed that you are using port forwarding. Is this a public or private setup? Your configuration is dependent upon what setup ou want to use.
Is it:
A private network-based setup with a local login server?
A private network-based setup with a remote login server (i.e.,
www.eqemulator.net)?
A single computer connected to an ISP IP address?
etc...?
If you're using a local login server scheme (and not the minilogin), check out my post on solo computer setup here:
http://www.eqemulator.org/forums/showthread.php?t=35222
(I don't know how to make it focus on my post, but it's down near the bottom on the first page.)
Then, if you're on a private network, make the changes for a lan setup (changing 127.0.0.1 to 192.168.xxx.xxx where appropriate..but not the database.) This same setup will work if your hosting a public server as well, as long as your use the port forwarding. If it's a private server, clear out the port forwarding or you could get unwanted outside traffic.
(It could be a typo, but make sure your port forwarding 'range' is 7000 to 7100 and not just 7000 to 7001.)