[Rogean]

I compiled it fine and been tryin to use this, seems like its working but it never opens the .pf file?

D:\eqemu\tool\EQEmuTools\eqcollector\conf>eqemucol lector -d 0
Opcodes file ./opcodes.conf successfully loaded.
Sniffing on 'Realtek RTL8168C/8111C PCI-E Gigabit Ethernet NIC', net=0.0.0.0, target=
Starting live network collect.
New Stream: Server=199.108.9.80:9000, Client=192.168.1.107:49885 Detected!
Stream: Server=199.108.9.80:9000, Client=192.168.1.107:49885 Key=3f827bbd (World)
Destroying stream pair 0x112f7d8: 192.168.1.107:49885 -> 199.108.9.80:9000
New Stream: Server=199.108.15.111:1377, Client=192.168.1.107:49885 Detected!
Stream: Server=199.108.15.111:1377, Client=192.168.1.107:49885 Key=786e37b6 (Zone)
Destroying stream pair 0x112f7d8: 192.168.1.107:49885 -> 199.108.15.111:1377
New Stream: Server=199.108.9.80:9000, Client=192.168.1.107:49885 Detected!
Stream: Server=199.108.9.80:9000, Client=192.168.1.107:49885 Key=7d611c5f (World)
New Stream: Server=199.108.9.86:1351, Client=192.168.1.107:49885 Detected!
Destroying stream pair 0x1668048: 192.168.1.107:49885 -> 199.108.9.80:9000
Stream: Server=199.108.9.86:1351, Client=192.168.1.107:49885 Key=3d45ff08 (Zone)

I have a logs directory.