View Single Post
  #2  
Old 06-14-2018, 11:01 PM
Riklin
Hill Giant
 
Join Date: May 2003
Location: Tacoma, WA
Posts: 220
Talking

I have spent the last 2 evenings trying new configurations and parameters, to get everything to work.

Regarding Port Forwarding, I ended up using the standard port forwarding with one exception. The correct ucs and mail port needs forwarded.

The ucs and mail port in the default Akka script setup uses port 7500. I set that port to 7778 like it used to be on my old server and that fixed this.

For mail and UCS to work you MUST use your REAL IP ADDRESS in your eqemu_config.json, not the lan pseudo one, if you want mail and UCS to work with any clients that are not on your local network.

I was able to get my old TMUX startup method working. The key difference here was to wait for 3 static zone launchers to finish loading their zones, then launch a separate launcher for the dynamic zones.

This setup script works really well! Now if I can just figure out how to get the PHPEditor to work...
Reply With Quote