Eqgame.exe Appcrash Error

[pr0mpt]

Hello everyone. Eq is not treating me very well at the moment.

I just had everything up and running was playing no problem. shut down my computer and went out came back and now everytime i click my eqgame.exe it crashes instantly before doing anything and gives me this message

EQgame.exe has stopped working properly.

Problem Event Name: APPCRASH
Application Name: eqgame.exe
Application Version: 0.0.0.0
Application Timestamp: 4366642a
Fault Module Name: eqgame.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4366642a
Exception Code: c0000005
Exception Offset: 00213881
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Additional Information 1: ee89
Additional Information 2: 56e932be698f16690a2e707784560b37
Additional Information 3: 0523
Additional Information 4: df2033c375c556c8b9e96ed7c77bda88

-----------------------------------------------

Now I've done some reading reinstalled all my drivers. reinstalled EQ. Running it in windows xp sp2 compatibility mode. as adminstrator. tried the everquest.exe, tried setting the core affinity to 1 nothing seems to be working and i have no idea why this would have happened all my other games are perfectly fine. As i said i was playing earlier no problem. Anyone have any ideas on how i could get this resolved?

[trevius]

Normally when that happens, it is either due to DX9c not being installed or more likely, a resolution issue. Check the FAQ in my sig for info on resolution problems.

[pr0mpt]

Hey Trevius thanks for the reply.

I tried the optioneditor.exe but it comes up as this


My eqclient.ini file doesnt even exist ive searched all over for it no luck.
There is a checkbox for "runs in 640x480 resolution" had no luck with this option either.

I do have dual core and tried this

Dual Core CPU Fix:

If you are running Windows 7 or Vista, the following should completely fix any Dual Core CPU issues. It may even work on other versions of Windows, but I haven't tried it.

Windows Vista/7 has an option that lets you start an application and set the CPU affinity, which assigns the application to run on a specific CPU in a multi-core system. To do so, follow these steps:

1. Right click on your EQEmu shortcut on your desktop.
2. Click "Properties".
3. Go to the Shortcut tab if you aren't there already (should already be on this tab).
4. Delete everything in the "Target" field, but make sure to leave the "Start in" field alone!
5. Paste the following line into your "Target" field:

Code:
c:\windows\system32\cmd.exe /C start /affinity 1 eqgame.exe patchme
6. Click OK and you are ready to start Everquest

Note that you will see a window blink quickly before EQ starts, but that is the command prompt doing it's thing and you don't have to worry about it.

i get the flicker of the command prompt and then the same error as usual :(

[pr0mpt]

Fixed it. Turns out my system clock was out of whack

[nathious]

well I am still having your issue ... I can not get it to launch and have tried everything you did just didn't get why your clock would have anything to do with it ... totally lost and confused