Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::Windows Servers

Support::Windows Servers Support forum for Windows EQEMu users.

Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2019, 09:59 AM
modstudio
Fire Beetle
 
Join Date: Mar 2019
Location: Lund, Sweden
Posts: 4
Default New LAN-server : connecting with client problems

Hi!
I am totaly new to EverQuest (old enough to have played Ascherons Cal thou) and I have just recently started a small project to try and get a EverQuest server running, both from LAN and remote.

So first thing I did was to install a client following this wiki:
http://wiki.ezserver.online/Getting_Started

I tried it out and I could log into a remote server from the community
eqhost.txt
[LoginServer]
Host=login.eqemulator.net:5999

And from there I followed another "How to setup a Windows based EQ-server"
https://github.com/EQEmu/Server/wiki/Windows-Server

I made sure that the login.ini and eqemu_config.json file is updated with my local ip-adress of the computer running the EQ server.

Furthermore I made sure that the Clients eqhost.txt have the correct ip aswell.

So when I start my Client and log on - nor servers at all are showing.
I can se from the log on my server that my client did log on, it retrived the server list and disconnected when I did.

So my question is if I need to to anything else to setup my server?

Thank you in advance for answers and apologies in advance if this have been asked earlier

Tomas,
Lund, Sweden

Last edited by Uleat; 03-06-2019 at 06:37 PM.. Reason: removed link for client download
Reply With Quote
  #2  
Old 03-06-2019, 05:08 PM
phantomghost
Hill Giant
 
Join Date: May 2015
Posts: 126
Default

If your client points to your IP, it would only show your server.

You updated loginserver2?

Make sure you set 5999 or 5998 for client.

Would need more info really to give anything more than a complete guess. Also, this forum has a few LAN loginserver related issues read those they have some fixes such as client located in Program Files or using a specific IP rather than the network.
Reply With Quote
  #3  
Old 03-06-2019, 05:22 PM
modstudio
Fire Beetle
 
Join Date: Mar 2019
Location: Lund, Sweden
Posts: 4
Default

Well I did double check and triplecheck my ip-adresses and I did do the ultimate error and write in the wrong one.

So after correcting my error I can log in on my client, I see my server but listed as down.

I can connect,create a character and the the server-log comes up with the error "No zone server to boot up"

In the log of "EQEmu login server" I see an error aswell.
I will update this post from that computer with the exact error-log

EDIT:
Error-log
[Login Server] New world server connection from 192.168.0.4:60361
[Error] Handle_NewLSInfo error, remote address was null, defaulting to stream address 192.168.0.4.
[Error] Mysql query returned no result: SELECT ifnull(WSR.ServerID,999999) AS ServerID, WSR.ServerTagDescription, ifnull(WSR.ServerTrusted,0) AS ServerTrusted, ifnull(SLT.ServerListTypeID,3) AS ServerListTypeID, SLT.ServerListTypeDescription, ifnull(WSR.ServerAdminID,0) AS ServerAdminID FROM loginserver_world_server_registration AS WSR JOIN loginserver_server_list_type AS SLT ON WSR.ServerListTypeID = SLT.ServerListTypeID WHERE WSR.ServerShortName = 'Akkas PEQ Installer'
[World Server] Server Akkas Windows PEQ Installer (Modstudio)(Akkas PEQ Installer) attempted to log in but database couldn't find an entry but unregistered servers are allowed.
Reply With Quote
  #4  
Old 03-06-2019, 05:30 PM
phantomghost
Hill Giant
 
Join Date: May 2015
Posts: 126
Default

You have MySql running?
Reply With Quote
  #5  
Old 03-06-2019, 05:36 PM
modstudio
Fire Beetle
 
Join Date: Mar 2019
Location: Lund, Sweden
Posts: 4
Default

MySQL is running as a service yes.
Reply With Quote
  #6  
Old 03-06-2019, 06:06 PM
belvino
Fire Beetle
 
Join Date: Feb 2019
Location: MS
Posts: 25
Default

I recently had this problem here was my solution. http://www.eqemulator.org/forums/showthread.php?t=42341
Reply With Quote
  #7  
Old 03-06-2019, 07:52 PM
Huppy's Avatar
Huppy
Demi-God
 
Join Date: Oct 2010
Posts: 1,333
Default

Make sure the longname and shortname you have in your config match the exact names you have in the database (exact match, character for character)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 12:39 AM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3