Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::General Support

Support::General Support Post all topics here having to do with errors while trying to connect to an EQEMu server but not about the setup/running of the Server itself.

Closed Thread
 
Thread Tools Display Modes
  #61  
Old 12-28-2009, 06:08 AM
Xalander
Fire Beetle
 
Join Date: Oct 2007
Posts: 4
Default

installed windows 7 today, tried the resolution things you said and it doesn't work either... guess im gonna give up wasted too much time on this.
  #62  
Old 12-28-2009, 11:05 AM
pfyon's Avatar
pfyon
Discordant
 
Join Date: Mar 2009
Location: Ottawa
Posts: 495
Default

Make sure you have directX 9c installed, as I think someone else said directX 10 doesn't include some components from 9 that are needed for EQ.
  #63  
Old 01-18-2010, 12:28 AM
PAOtis
Fire Beetle
 
Join Date: Apr 2009
Location: Tunare
Posts: 3
Default

Quote:
Originally Posted by Speedz View Post
Could you test something for me.

Get this utility http://cpu.rightmark.org/products/rmclock.shtml and test what the throttle vs core clock are when you have your slow motion moments vs when it runs fine.

Basically see if you can duplicate my findings. When I am not experiencing slow motion both core clock and throttle matched. When I have the slow down the throttle is half of core clock.

Also ANYONE that can't seem to find a fix please do this as well and post findings.
I used that utility during my slow downs. It showed me that my CPU Core Clock AND Throttle plummet to about 50%. My CPU Load spiked at that time as well. CPU Frequency took a nose dive to about 0, and Voltage went down to about 60% of the usual amount.

However, I think my number one problem is overheating. My CPU temp rises until the slowdown, when it goes back down again. It seems to slowdown around 80C, which makes sense.

Any ideas about what I can do to alleviate this? I had a similar problem playing WoW and I fixed it by putting my laptop on top of books to increase airflow. The thing is I can play games like Half-life 2 on this computer. I'm hoping it's a something I can fix with my settings.

The first thing that came to mind was that perhaps my Processor is doing all the work while my video card is lagging behind. Here are my system specs from dxdiag:
Code:
------------------
System Information
------------------
Time of this report: 1/17/2010, 22:23:53
       Machine name: OWNER-PC
   Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.090805-0102)
           Language: English (Regional Setting: English)
System Manufacturer: Acer
       System Model: Extensa 4420
               BIOS: Ver 1.00PARTTBLl
          Processor: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 (2 CPUs), ~1.9GHz
             Memory: 1790MB RAM
          Page File: 828MB used, 3007MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 10
DX Setup Parameters: Not found
     DxDiag Version: 6.00.6001.18000 32bit Unicode

------------
DxDiag Notes
------------
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
          Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
        Card name: ATI Radeon Xpress 1250 
     Manufacturer: ATI Technologies Inc.
        Chip type: ATI Radeon Graphics Processor (0x791F)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_791F&SUBSYS_01231025&REV_00
   Display Memory: 894 MB
 Dedicated Memory: 255 MB
    Shared Memory: 639 MB
     Current Mode: 1280 x 800 (32 bit) (60Hz)
          Monitor: Generic PnP Monitor
      Driver Name: atiumdag.dll,atiumdva.cap,atitmmxx.dll
   Driver Version: 7.14.0010.0517 (English)
      DDI Version: 9Ex
Driver Attributes: Final Retail
 Driver Date/Size: 7/31/2007 22:45:26, 2999296 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: 
Device Identifier: {D7B71EE2-3A5F-11CF-9071-2921A1C2CA35}
        Vendor ID: 0x1002
        Device ID: 0x791F
        SubSys ID: 0x01231025
      Revision ID: 0x0000
      Revision ID: 0x0000
      Video Accel: ModeMPEG2_A ModeMPEG2_C 
 Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive 
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch 
                   {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY 
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive 
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch 
                   {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY 
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive 
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive 
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch 
                   {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY 
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
  #64  
Old 01-18-2010, 12:32 AM
PAOtis
Fire Beetle
 
Join Date: Apr 2009
Location: Tunare
Posts: 3
Default

Oh and here is what I've done so far:
Reinstalled display drivers
Reinstalled Directx
Downgraded settings in EQ, turning off anything I can and reducing resolution
Cleaned out my system (turning off unnecessary processes, etc.)
  #65  
Old 01-18-2010, 08:55 PM
Tyen05
Discordant
 
Join Date: Mar 2009
Location: eqbrowser.com
Posts: 309
Default

http://support.amd.com/us/Processor_.../DCO_1.1.4.zip

The AMD Dual-Core Optimizer 1.1.4 for WinXP/Vista/Win7 (which is the only one I installed):
  #66  
Old 01-18-2010, 11:39 PM
PAOtis
Fire Beetle
 
Join Date: Apr 2009
Location: Tunare
Posts: 3
Default

I think I had installed that last time I tried to play EQEmu, but I'll give it a shot. Thanks.
  #67  
Old 01-31-2010, 01:55 PM
Rhombus
Fire Beetle
 
Join Date: Jan 2010
Posts: 1
Default

EQemu keeps freezing when I try to connect to a server. I've tried changing the compatibilities, using all of them, and changing the affinity. Nothing seems to work. My computer uses windows 7, and when i installed EQemu on my laptop (uses vista) it worked fine. Anyone have any ideas what I should do?
  #68  
Old 02-03-2010, 05:04 PM
RiddlN
Fire Beetle
 
Join Date: Apr 2005
Posts: 7
Default

I have tried every method available to me, and it still lags. When trying to install SP3, nothing happens, and when trying to install the hotfix patch - it says, "Not enough storage is available to process this command." I've run CCleaner and everything. BAH BAH please help!
  #69  
Old 02-12-2010, 07:40 PM
Tsuken
Fire Beetle
 
Join Date: Feb 2010
Posts: 9
Default

when I put this in the target box:
c:\windows\system32\cmd.exe /C start /affinity 1 eqgame.exe patchme

Nothing happens. Everquest doesn't start at all. The cmd window blinks for a split second, but then nothing.

I'm using windows xp.
  #70  
Old 02-12-2010, 07:53 PM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

I think that option may only work for Windows Vista or later. You will probably need to try one of the other fixes like updating to SP3 and using the AMD Optimizer if your CPU is AMD.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
  #71  
Old 02-17-2010, 10:24 AM
metallicahead
Fire Beetle
 
Join Date: Feb 2010
Posts: 1
Default

Every time I choose a server and click play i get a black screen and the game just locks up. I am running windows vista 64 bit with AMD tri core. I tried all the things that were mentioned in the thread. But nothing seems to be working.

I tried compatibility mode with all the different modes, did nothing
I dled the run first program followed the instructions still black screen of death.
I did the task manager thing and the CPU was already set on CPU 0

I tried messing with the resolution in the game that didnt work
My drivers are updated.

I really dont know what I am doing wrong.

Any suggestions would be greatly appreciated

thanks!
  #72  
Old 03-02-2010, 07:24 PM
ronzer
Fire Beetle
 
Join Date: Mar 2010
Posts: 1
Default

Not sure if this will work for other people, but it worked for me.

Win7 64bit, Athlon 64 x2

I made the EQ shortcut use compatibility mode for WinXP SP3, and just under that I checked the "Disable desktop composition" checkbox as well as "Run this program as an administrator". Works flawlessly.
  #73  
Old 06-06-2010, 12:29 PM
Sebastionleo
Fire Beetle
 
Join Date: May 2010
Location: Flint, MI
Posts: 5
Default

I have this one working with Runfirst, but how do I make it work if I want to use eqwindows?
  #74  
Old 09-07-2010, 01:09 PM
wendolyne
Fire Beetle
 
Join Date: Jun 2004
Location: Sweden
Posts: 26
Default

God im having problems with this... I never had any problem with this when i used windows XP... now i use W7 and i got it to work but its its very laggish. like i get fps drop.. i used the Affinity method in the process handler... meaby i should set some of the .exes to different core? I got a dual core so... i got 2 to choose from... annoying work since i box 6 chars:/


Running Athlon X2 dual core 6000+ (3.0 ghz) and 6 gig rams...

It works flawlessly when i only run 1 instance... but when i start 2 it begins to chop lagg...



Thanks for great guide doh. ive tried everything so far :/
__________________
-Playing on TGC/PEQ-

Desecrator<Kreator>
  #75  
Old 09-09-2010, 03:45 PM
wendolyne
Fire Beetle
 
Join Date: Jun 2004
Location: Sweden
Posts: 26
Default

Strange, it started working better if i set the affinity my self. not using the shortcut/target command.
__________________
-Playing on TGC/PEQ-

Desecrator<Kreator>
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 07:14 AM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3