Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::MiniLogin

Support::MiniLogin Support forum for problems with the official MiniLogin release.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-16-2012, 03:10 AM
kamaushi
Fire Beetle
 
Join Date: May 2006
Posts: 29
Default Can anyone help me set up minilog in?

Trying to get someone to help me with minilog in any help would be great Gtalk name is Edblauvelt I cant not for the life of me figure out where to start...... or even where to do the sql querys read threw the setup guide and still no clue...* IM A HUGE NOOB TO THIS TYPE OF STUFF!!*

Last edited by kamaushi; 06-16-2012 at 03:42 AM.. Reason: Wasn't clear enough with original post
Reply With Quote
  #2  
Old 06-16-2012, 03:50 AM
kamaushi
Fire Beetle
 
Join Date: May 2006
Posts: 29
Default

[Err] 1062 - Duplicate entry 'LoginType' for key 'PRIMARY'
[Err] INSERT INTO VARIABLES (varname, value, information) VALUES ('LoginType', 'Minilogin', 'Set this to Minilogin to login using a minilogin server ');
[Msg] Finished - Unsuccessfully
--------------------------------------------------
Using Navicat lite I put this in my peq database and thats what i got when i ran the SQL file i made in Notepad++
Reply With Quote
  #3  
Old 06-16-2012, 05:47 AM
kamaushi
Fire Beetle
 
Join Date: May 2006
Posts: 29
Default

Ok I figured it out to the point where it says need to set the <adress> element in the <world> section......... in world.exe I've set that in the XML file and the loginhost to what my computer shows as the ip in IPconfig in dos.........but still wont connect to anything............ all the addresses are correct......and it might help troubleshooting that i dont use a router and this computer wont be connected to the internet when i do play thats why im using mini login
Reply With Quote
  #4  
Old 06-16-2012, 06:15 AM
kamaushi
Fire Beetle
 
Join Date: May 2006
Posts: 29
Default

The client connects no problem at all...........but the world refuses to connect to the minilogin.......

heres the loginserver from the mini login folder......

[LoginServer]
loginserver=127.0.0.1
loginserver2=
loginport=5999
loginport2=
worldname=
worldaddress=
locked=false
account=
password=

[WorldServer]
Defaultstatus=
Unavailzone=

[ChatChannelServer]
worldshortname=
chataddress=
chatport=

[LoginConfig]
ServerMode=minilogin
ServerPort=5999


and heres the XML file in the server folder.............

<?xml version="1.0">
<server>
<world>
<shortname>ejsepic</shortname>
<longname>ejs epic new server</longname>

<!-- Only specify these two if you really think you need to. (read: You don't) -->
<!-- <address>75.105.36.37</address> --> <~(I've had the address and the local address both the same didn't work this is the last configuration i tried and no this is not in my .xml file )
<!-- <localaddress>127.0.0.1</localaddress> -->

<!-- Loginserver information. Defaults shown -->
<loginserver>
<host>127.0.0.1</host>
<port>5999</port>
<account></account>
<password></password>
</loginserver>

<!-- Server status. Default is unlocked -->
<!--<locked/>-->
<!-- <unlocked/> -->

<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<tcp ip="localhost" port="9000" telnet="disable"/>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>1337</key>

<!-- Enable and set the port for the HTTP service. Defaults are shown -->
<http port="9080" enabled="false" mimefile="mime.types" />
</world>

<!-- Chatserver (channels) information. Defaults shown -->
<chatserver>
<host>channels.eqemulator.net</host>
<port>7778</port>
</chatserver>

<!-- Mailserver (in-game mail) information. Defaults shown -->
<mailserver>
<host>channels.eqemulator.net</host>
<port>7779</port>
</mailserver>

<zones>
<defaultstatus>20</defaultstatus>

<!-- Sets port range for world to use to auto configure zones -->
<ports low="7000" high="7100"/>
</zones>

<!-- Database configuration, replaces db.ini. Defaults shown -->
<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>bashim</password>
<db>peq</db>
</database>

<!-- Launcher Configuration -->
<launcher>
<!-- <logprefix>logs/zone-</logprefix> -->
<!-- <logsuffix>.log</logsuffix> -->
<!-- <exe>zone.exe or ./zone</exe> -->
<!-- <timers restart="10000" reterminate="10000"> -->
</launcher>

<!-- File locations. Defaults shown -->
<files>
<!-- <spells>spells_us.txt</spells> -->
<!-- <opcodes>opcodes.conf</opcodes> -->
<!-- <logsettings>log.ini</logsettings> -->
<!-- <eqtime>eqtime.cfg</eqtime> -->
</files>
<!-- Directory locations. Defaults shown -->
<directories>
<!-- <maps>Maps</maps> -->
<!-- <quests>quests</quests> -->
<!-- <plugins>plugins</plugins> -->
</directories>
</server>
..............
And a quick reminder I WILL NOT BE CONNECTED TO the INTERNET NOR do I HAVE a ROUTER
Reply With Quote
  #5  
Old 06-16-2012, 06:26 AM
kamaushi
Fire Beetle
 
Join Date: May 2006
Posts: 29
Default

IM an idiot........... forgot to take the <--- out of the address lines like


change:

<!--<address>129.81.73.41</address>-->

to:

<address>129.81.73.41</address>

Assuming 129.81.73.41 is the address your world is running on.

http://www.eqemulator.org/forums/showthread.php?t=23747
CREDIT: Derision Title Developer
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 07:15 PM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3