Custom Full PvP Unholy Grounds Server (Alpha Testing)

[ardianko]

Hi all ive created a custom zone/mobs/loot server with full PVP(no restrictions). Im opening it up for 24 hours so I can get some suggestions for the server so I can apply changes best suitable for the community. Try it out, its called Unholy Grounds Alpha Testing

[ardianko]

server crashed, up again

[moydock]

Can't connect to your world. You probably need to open your routers ports so outside traffic can get in.

[ardianko]

how about now? I've searched for "Open Router Ports" and configured some stuff... This all seems VERY confusing, Im not good with port forwarding and opening ranges at all

[moydock]

No good. Are you forwarding both UDP and TCP, 9000, and 7000-7100.
You need to forward them to your server's network address example: (192.168.1.5)

[ardianko]

Ive only forwarded to TCP 9000, and i do it through the firewall>exceptions tab... Im not sure how to forward a range like 7000-7100 and im not sure how to forward it towards my servers network address which is (192.168.1.3) , mind giving a hand ?


=====================================
Some Customization in the starting zone for all class/races (Crushbone);

Enchy Pet


gmers



Invader who paths in and out the safe-startout cave

[ardianko]

Weapon that spawns swarm pet; Allowed only 5 up to be up at once


Bridge Guardian


Bridge Guardian after he dies (scripted)


Castles guards

[ardianko]

Crush & guards


Crush at 50% , spawns a low hp druid orc every 5% of his heatlh that nukes (scripted) ...

[moydock]

Looks good, of course, you'll need to offer a patch for people to get those models loaded into crushbone. Just the crushbone_chr file.
As far as router, google your router name and port forward or something and see if you can find a guide. If you can't figure it out, tell me your router model/brand and i'll see what i can do.

[ardianko]

No patch needed, all those models i put in crushbone are global models or models already used in eqlive for the zone =]

My router is :: Linksys Wireless-B Broadband Router (Model: BEFW11S4)

I would kinda need you to guide me after you get the information on my router since I really have no experience on port forwarding whatsoever ... Thank you moydock appreciate the help

[moydock]

Guide for your router:
http://portforward.com/english/route...4/Echolink.htm

[ardianko]

kk followed the guides, and opened up ports 9000, and 7000-7100 ; Can you try it now and see if u can connect?

[moydock]

Works, but when I created a char, a yellow mob attacks me right off, and has too much regen to kill, so he just kills me over and over... lol

[ardianko]

lmfao my bad, ill lower it down to 0 ... was worried if he would be too strong :P

[aznmonky]

Ima test it out :0