Go Back   EQEmulator Home > EQEmulator Forums > Support > Support::General Support

Support::General Support Post all topics here having to do with errors while trying to connect to an EQEMu server but not about the setup/running of the Server itself.

Reply
 
Thread Tools Display Modes
  #1  
Old 05-07-2011, 03:02 PM
Toplait
Fire Beetle
 
Join Date: May 2011
Posts: 2
Default Error in your GUI XML files. Check UIErrors.txt

Hello,

I seem to be having issues after clicking on the server and then clicking launch. The "screen stays black." If I click the screen it will say not responding and immediately give me, "Error in XML" box. Within that box it says Error in your GUI XML files. Check UIErrors.txt

I followed the directions on both webpages to the best of my ability. Any ideas would be appreciated were I went wrong at.
Reply With Quote
  #2  
Old 05-07-2011, 03:07 PM
KingMort
Banned
 
Join Date: Sep 2006
Posts: 841
Default

What servers , all of them or just one ?

Most likely though it's the UI your Client is set too that Eqemu doesn't like.

There are a few UI's that I know in fact do work in eqemu and people use them listed in this forum that you may try using instead of whatever you have atm.

http://forums.raidaddicts.org/viewfo...1c261a383c066e

Best of luck to you, let me know if that works
Reply With Quote
  #3  
Old 05-08-2011, 03:48 PM
Toplait
Fire Beetle
 
Join Date: May 2011
Posts: 2
Default

Hi,

Thanks for responding, it seems like all servers.
Reply With Quote
  #4  
Old 05-11-2011, 05:03 PM
Bevi1019
Fire Beetle
 
Join Date: May 2011
Posts: 4
Default

I am currently getting the same error, SoF client, all servers.
Reply With Quote
  #5  
Old 05-11-2011, 06:47 PM
Bevi1019
Fire Beetle
 
Join Date: May 2011
Posts: 4
Default

I get this message for all of my XML files "referenced but NEVER declared!" in the UIError.txt
Reply With Quote
  #6  
Old 05-11-2011, 10:48 PM
Lachdanon
Fire Beetle
 
Join Date: May 2011
Posts: 1
Default

I just followed both install guides and am getting this error as well when trying to login.
Reply With Quote
  #7  
Old 05-12-2011, 12:07 AM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

You should post which client it is that you are having trouble with. Also, check the wiki to make sure you are using one of the correct versions of EQ for EQEmu:

http://www.eqemulator.net/wiki/wikka...ClientVersions

As for UI errors, generally that would mean you either installed a custom UI, or you installed EQ over an existing EQ installation. Unless you either install EQ to a NEW folder, or uninstall EQ completely and delete the folder for it and then reinstall, there is a chance you will have files remaining from a previous install that will break your EQEmu compatibility.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #8  
Old 05-12-2011, 12:17 AM
Amilu
Fire Beetle
 
Join Date: May 2011
Location: Port Orchard, WA
Posts: 2
Default

I am getting this error also. I removed the Velious UI folder and double checked I had the right files in the default folder.

I used the The Secrets of Faydwer to install for the Legacy of 1999 server. I also have EQ installed on another HD partition on my computer. Do I need to totally removed both again and start over with a complete fresh install? I do still play EQ on the SOE servers.


Text of UIerrors:


UIErrorLog created at Wed May 11 21:04:09 2011
[Wed May 11 21:04:10 2011] XML reference error! Ui2DAnimation[6]:A_ChatMax[634] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_ChatMaxP[635] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_ChatMaxH[636] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_MaximizeBtnNormal[637] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_MaximizeBtnPressed[638] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_MaximizeBtnFlyby[639] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_MaximizeBtnDisabled[640] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_MaximizeBtnPressedFlyby[641] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_FiligreeThinFrameRightTop[642] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_FiligreeThinFrameRight[643] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_FiligreeThinFrameRightBottom[644] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_FiligreeThinFrameLeftTop[645] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_FiligreeThinFrameLeft[646] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_FiligreeThinFrameLeftBottom[647] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_CharacterSelect[648] referenced but NEVER declared!
XML reference error! Ui2DAnimation[6]:A_InvPowerSource[649] referenced but NEVER declared!

[Wed May 11 21:04:10 2011] Error validating symbol table.
[Wed May 11 21:04:10 2011] Error validating symbol table.
Reply With Quote
  #9  
Old 05-12-2011, 12:20 AM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

I am not sure what the Legacy of 1999 server is, but if you mean Project 1999, then that is only compatible with Titanium. SoF will not work for it. Though, you should be able to connect to other servers fine to test your client.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #10  
Old 05-12-2011, 01:57 AM
Amilu
Fire Beetle
 
Join Date: May 2011
Location: Port Orchard, WA
Posts: 2
Default

Oops sorry it is Project 1999. Damn, I really didn't want to go out and buy the Titanium version.

I was hoping that the getting started page of the Project 1999 that said - There is another client that works on our server (The Secrets of Faydwer client), but this client is unsupported, and you may experience problems with some of the features. - meant the issues where in game and possibly ignorable.

Looks like i will be making the 50 mile round trip to the nearest store that actually still carries EQ anymore.
Reply With Quote
  #11  
Old 05-12-2011, 02:18 AM
sorvani
Dragon
 
Join Date: May 2010
Posts: 966
Default

You can always expect to get UI errors. But it should not cause the client to fail to load.

Even live gets UI errors with the default UI now, because Sony has never fixed it.
Reply With Quote
  #12  
Old 05-12-2011, 02:37 AM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

Quote:
Originally Posted by Amilu View Post
Looks like i will be making the 50 mile round trip to the nearest store that actually still carries EQ anymore.
If you do, make sure you call first! It is extremely rare to find a copy of Titanium on the shelf of any store these days.

If the P99 website says that SoF can work with it, then that is news to me, though I don't really follow their stuff much at all. If it says that, then maybe there is something you can do to resolve it, but you would have to work with them on their forums, not here.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote
  #13  
Old 05-12-2011, 10:28 AM
shaduuu
Fire Beetle
 
Join Date: Mar 2011
Location: MN
Posts: 9
Default

I had that error before and had to delete all my Ui's and reinstalled the default 1 and that worked
Reply With Quote
  #14  
Old 05-12-2011, 04:52 PM
bard_007
Fire Beetle
 
Join Date: May 2011
Location: New Zealand
Posts: 10
Default

hi i got this error when i setup from a underfoot install, my fix was to just grab my live default UI folder and place it in my EQE EQ folder, it loaded and got me to the server screen ...

hehe ill be posting somewhere else the next issues after reading alittle more ..

hope that helps
Reply With Quote
  #15  
Old 05-12-2011, 05:57 PM
Bevi1019
Fire Beetle
 
Join Date: May 2011
Posts: 4
Default

I am currently toying with my files for the SoF client and Project 1999, I've gotten as far as creating a character and the server just went down on me, If I get a fix that allows me to actually enter the game I will post it here.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

   

All times are GMT -4. The time now is 03:41 PM.


 

Everquest is a registered trademark of Daybreak Game Company LLC.
EQEmulator is not associated or affiliated in any way with Daybreak Game Company LLC.
Except where otherwise noted, this site is licensed under a Creative Commons License.
       
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Template by Bluepearl Design and vBulletin Templates - Ver3.3