|
|
|
 |
|
|
 |
|
 |
 |
|
 |
 |
|
 |
|
| Support::Linux Servers Support forum for Linux EQEMu users. |
02-25-2013, 01:52 PM
|
|
Sarnak
|
|
Join Date: Apr 2006
Posts: 40
|
|
It tries to pull it from your network config, but the variables section at the start of the script allows you to change it to a default setting. Honestly, I think I'm just going to get rid of the autodetect and just tell you to enter it manually. You should be able to find your IP address, anyway, even if you just use a script to install EQ.
With some patchwork (have some changes to make on the script, again), I got a server up and running at ubuntu.kludde.net. Feel free to try to log in (user test, pwd account), or PM me if you want to have root access to the server to fiddle around with it.
X.
|
02-28-2013, 08:58 AM
|
|
Sarnak
|
|
Join Date: Dec 2007
Posts: 57
|
|
did you see the changelog update about shared memory?
also, do you have a GIT version I can test out?
|
02-28-2013, 09:08 AM
|
|
Sarnak
|
|
Join Date: Sep 2011
Posts: 51
|
|
I had a few perl errors with ubuntu 12.04 , the first was at the Cmake something about library's then a pathing error about perl library path the first one was populated ok. I re-ran the script but error with mysql password which i think i can correct by uninstalling it.
I'm going to start again from scratch tonight and load perl before I run the script.
|
 |
|
 |
02-28-2013, 09:33 AM
|
|
Sarnak
|
|
Join Date: Apr 2006
Posts: 40
|
|
Before you do, use this updated script
Also, re-running the script will give a mysql password error, because the script assumes MYSQL wasn't installed and that the password is empty, so it tries to change it - afterwards, it will use the same password that was set at the start, so it will go through automagically and still reload the database correctly (unless you changed the Mysql password in between the run and the rerun)
Updated script:
Code:
clear
#
# GITHUB VERSION, CURRENTLY ALPHA TEST
#
# Compiles as standard on 32 bit Debian/Ubuntu.
# To change this to compile on 64 bit machines, scroll down
# to the crypt section, which needs to be changed.
#
# THESE ARE THE VARIABLES, PLEASE CHANGE TO SUIT YOUR NEEDS
# (Added more explanation + more variables - X.)
#
# Self-explanatory First Account Name and Password
#
FIRST_ACCT_NAME="test"
FIRST_ACCT_PW="account"
#
# Emulator Short name for loginserver, Long name for EQ
# Change to fit your needs.
#
EMU_SHORT_NAME="SCRIPTEDLINUX"
EMU_LONG_NAME="ScriptedLinux"
#
# Database Root password and EQEMU password,
# so your server is more secure (non-default passwords)
#
ROOTPASS="eqemu"
EQEMUPASS="eqemupw"
#
# Your IP - do not touch unless you know what you're doing,
# autodetect does not work, or you are compiling for a
# different machine.
#
EXT_IP=`ifconfig eth0 | grep "inet addr:" | awk -F: '{ print $2 }' | awk '{ print $1 }'`
#
#
echo ' '
echo ' ################################################# '
echo " ### Xumtiil's adaptation of : ### "
echo " ### Tim's EQEQMU Installer Version 1.0 ### "
echo ' ### Author : Tim Little (Original) ### '
echo ' ### Raf Lejeune (CMAKE, fixes, vars) ### '
echo ' ### Date : 2012-03-10 // 2013-02-21 ### '
echo ' ################################################# '
echo ' '
echo ' ================================================= '
echo ' === So easy, a complete git could do it... === '
echo ' === This script was made so that a person === '
echo ' === could get a eqemu installed and running === '
echo ' === on a Ubuntu/Debian server within less === '
echo ' === than an hour and with the LEAST amount === '
echo ' === of file editing and complex stuff! === '
echo ' ================================================= '
echo ' '
echo "Your current eth0 IP is set to $EXT_IP."
echo "That address will be used in all the configuration files."
echo ' '
echo '+--------------------------------------------------------------+'
echo '! About to start installing. !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
cd /home
#
# Change the sysctl.conf to reflect the sharedmem parameter change
# This should take far less than a second. Should require root.
#
cp /etc/sysctl.conf /etc/sysctl.conf_original
grep -v "kernel.shm" /etc/sysctl.conf | grep -v "TJL" > /etc/new_sysctl.conf
mv /etc/new_sysctl.conf /etc/sysctl.conf
echo "# added by TJL - 2012-02-27 for eqemu" >> /etc/sysctl.conf
echo "kernel.shmmax = 134217728" >> /etc/sysctl.conf
echo "kernel.shmall=65536" >> /etc/sysctl.conf
echo ' '
echo '+--------------------------------------------------------------+'
echo '! Modified sysctl !'
echo '! About to install packages as needed. !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Removing eqemu directories, if they exist.
#
rm -rf /home/eqemu
#
# If user eqemu does not exist, it will give a tiny error message
# but it will be swallowed up in the huge list of packages that
# mercifully scroll past.
# userdel eqemu
useradd eqemu
#
# Update package list
#
apt-get clean
apt-get update
#
# Thus is the first critical part...
# It installs all the needed packages...
# So you don't have to! (added cmake, git - X.)
# If you are getting problems at this point, check your sources.list
# (Usually at /etc/apt/sources.list - make sure you have security in there)
#
apt-get -y install git git-core gcc g++ cpp libmysqlclient-dev libio-stringy-perl
apt-get -y install zlib-bin zlibc unzip make cmake subversion
apt-get -y install libmysqlclient-dev libperl-dev mysql-client-5.1
#
echo ' '
echo '+--------------------------------------------------------------+'
echo '! About to install database server (if needed) !'
echo '! !'
echo '! Please be aware that the database server installation will !'
echo '! ask for a root password THREE TIMES! !'
echo '! !'
echo '! Each time that it asks, just hit ENTER to choose NO PASSWORD !'
echo '! !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
apt-get -y install mysql-server
#
# Once the server software is installed, the my.cnf exists, but it
# binds to localhost or 127.0.0.1 and I think that the real IP
# is a better point. So this next part changes the bind address
# automatically.
#
cat /etc/mysql/my.cnf | sed s/bind-address.*/bind-address=$EXT_IP/ > tmp.cnf
cp tmp.cnf /etc/mysql/my.cnf
#
echo ' '
echo '+--------------------------------------------------------------+'
echo '! Downloading all the source-code, maps, db stuff from the net.!'
echo '! !'
echo '! This could take a few minutes and there might be pauses,,, !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Prepare everything by making the necessary directories
#
mkdir -p /home/eqemu/server/logs
mkdir -p /home/eqemu/source
mkdir -p /home/eqemu/server/Maps
mkdir -p /home/eqemu/server/quests
mkdir -p /home/eqemu/server/plugins
#
# Make sure we are about to pull everything into the right directories..
#
cd /home/eqemu/source
#
# Second critical part -- getting all the most recent code,
# database items, quests, maps and plugins from the source.
# With super-fast connection speeds, this may still take a few
# minutes.
#
# Added git repository - X.
#
git clone git://github.com/EQEmu/Server.git
svn co http://projecteqdb.googlecode.com/svn/trunk/peqdatabase
svn co http://projecteqquests.googlecode.com/svn/trunk/quests
svn co http://eqemumaps.googlecode.com/svn/trunk/Maps
svn co http://allaclone-eoc.googlecode.com/svn/trunk/ allaclone-eoc-read-only
#
# Now copy from the SOURCE directories to the SERVER directories
# as needed. Might take a bit.
#
echo '+--------------------------------------------------------------+ '
echo "! Copying some files around, we're still in business !"
echo '+--------------------------------------------------------------+ '
cp -r /home/eqemu/source/Maps/* /home/eqemu/server/Maps/
cp -r /home/eqemu/source/quests/* /home/eqemu/server/quests/
chmod --recursive ugo+rwx /home/eqemu/server/quests/
cp -r /home/eqemu/source/quests/plugins/* /home/eqemu/server/plugins/
chmod --recursive ugo+rwx /home/eqemu/server/plugins/
cp /home/eqemu/source/Server/utils/defaults/commands.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/plugin.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/worldui.pl /home/eqemu/server/
# WorldUI currently not in git repo - X.
#
# mkdir /home/eqemu/server/worldui
# cp -r /home/eqemu/source/Server/utils/defaults/worldui/ /home/eqemu/server/worldui/
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Loading the database (could take a few minutes)... !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
echo ' Loading database -- please wait... '
echo ' '
cd /home/eqemu/source/peqdatabase/
#
# Set the root DB password to $ROOTPASS
# Creating eqemu user with initial password to $EQEMUPASS
# Yeah, VARIABLES BABY! - X.
#
echo "set password for 'root'@'localhost' = PASSWORD('$ROOTPASS');" > /home/eqemu/server/logs/db_users.sql
echo "GRANT ALL PRIVILEGES ON *.* TO 'eqemu'@'%' IDENTIFIED BY '$EQEMUPASS';" >> /home/eqemu/server/logs/db_users.sql
echo "flush privileges;" >> /home/eqemu/server/logs/db_users.sql
mysql -u root < /home/eqemu/server/logs/db_users.sql
rm -rf /home/eqemu/server/logs/db_users.sql
#
# Get ready to load the database
#
mysql -u root -p$ROOTPASS -e "drop database if exists peqdb; create database if not exists peqdb;"
gunzip peqdb_rev*.sql.gz
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/peqdb_*.sql
# that might take a little time -- just under two minutes on my machine...
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/load_player.sql
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/load_login.sql
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/load_bots.sql
mysql -uroot -p$ROOTPASS -D peqdb < /home/eqemu/source/Server/loginserver/login_util/EQEmuLoginServerDBInstall.sql
#
# Now we load that first account so we can have a GM account (or just muck around)
#
echo "insert into tblLoginServerAccounts (AccountName, AccountPassword ) values('xFN', sha('xPW') );" | sed s/xFN/$FIRST_ACCT_NAME/ | sed s/xPW/$FIRST_ACCT_PW/ > lsa.sql
mysql -uroot -p$ROOTPASS -D peqdb < lsa.sql
echo "UPDATE tblWorldServerRegistration SET ServerLongName = 'xLN', ServerShortName = 'xSN' WHERE ServerID = 1;" | sed s/xLN/$EMU_LONG_NAME/| sed s/xSN/$EMU_SHORT_NAME/ > wsr.sql
mysql -uroot -p$ROOTPASS -D peqdb < wsr.sql
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Moving ini and conf files around. !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
cd /home/eqemu/server
cp /home/eqemu/source/Server/utils/defaults/eqemu_config.xml.full eqemu_config.xml
cp /home/eqemu/source/Server/utils/defaults/log.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes.conf .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes_sod.conf .
cp /home/eqemu/source/Server/utils/patches/*.conf .
#
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! About to compile source code for a lot of stuff... !'
echo '! Expect this to take at least several minutes -- !'
echo '! Dont be surprised if this takes up to 20ish minutes. !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
#
# Fixed that they need the crypt files during the single make, not after. X
# These are the 32bit crypt files - 64 bits commented out inline.
# Switch comments for 64-bit OS. (Different process for GIT-based compile - X)
#
cd /home/eqemu/source/Server/dependencies
# 32 bits
wget -c http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x86.zip
# 64 bits
# wget -c http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x64.zip
rm -rf libEQEmuAuthCrypto.a
rm -rf libcryptopp.a
unzip ubu*.zip
#
# Added CMAKE section, to be able to use make later on. X.
#
echo
echo ' '
echo ' +--------------------------------------------------------------+'
echo ' Now CMAKE: Do not take advanced options, '
echo ' leave everything to default except loginserver ON,'
echo ' and BOTS as you prefer ON or OFF. '
echo ' If it starts asking for unknown PATHS, something broke. Restart. '
echo ' +--------------------------------------------------------------+'
echo ' '
mkdir /home/eqemu/source/build
cd /home/eqemu/source/build
cmake -G "Unix Makefiles" -i /home/eqemu/source/Server/
make clean &> /home/eqemu/clean_eqemuserver.log
echo ' '
echo ' Compiling source-code -- please wait... '
echo ' '
make &> /home/eqemu/compile_eqemuserver.log
#
# takes 12 minutes (tested with make -j, craps out. Won't suggest it - X)
# check that log file with nano just to see that there were no errors..
# if there were errors, then they'd probably be on the screen too, so only panic
# if you see a problem on-screen
#
# or use tail /home/eqemu/compile_eqemuserver.log
# to see the last lines - if it hits 100%, you're done - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Making links to compiled executables in the server directory.!'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Fixed the links to take new build process into account - X.
#
ln -s /home/eqemu/source/build/Bin/libEMuShareMem.so /home/eqemu/server/libEMuShareMem.so
ln -s /home/eqemu/source/build/Bin/world /home/eqemu/server/world
ln -s /home/eqemu/source/build/Bin/zone /home/eqemu/server/zone
ln -s /home/eqemu/source/build/Bin/loginserver /home/eqemu/server/loginserver
ln -s /home/eqemu/source/build/Bin/eqlaunch /home/eqemu/server/eqlaunch
ln -s /home/eqemu/source/build/Bin/chatserver /home/eqemu/server/chatserver
ln -s /home/eqemu/source/build/Bin/mailserver /home/eqemu/server/mailserver
#
cd /home/eqemu/server
#
# Adapted startup script, EQEmuLoginServer is no longer used, it is now
# just loginserver, as well as some other fixes - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Writing Startup Script... !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
echo 'ulimit -c unlimited ' > /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'cd /home/eqemu/server ' >> /home/eqemu/server/startup.sh
echo 'export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:. ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'rm -rf /home/eqemu/server/logs/login.log ' >> /home/eqemu/server/startup.sh
echo 'rm -rf /home/eqemu/server/logs/world.log ' >> /home/eqemu/server/startup.sh
echo 'rm -rf /home/eqemu/server/logs/zones.log ' >> /home/eqemu/server/startup.sh
echo 'rm -rf /home/eqemu/server/logs/*.log ' >> /home/eqemu/server/startup.sh
echo 'chmod --recursive ugo+rwx /home/eqemu/server/quests ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Starting Login Server... ' >> /home/eqemu/server/startup.sh
echo ' ./loginserver 2>&1 >> /home/eqemu/server/logs/login.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting about 5 seconds before starting World Server... ' >> /home/eqemu/server/startup.sh
echo 'sleep 5 ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo './world 2>&1 > /home/eqemu/server/logs/world.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting 10 seconds before starting the zones via launcher ' >> /home/eqemu/server/startup.sh
echo 'sleep 10 ' >> /home/eqemu/server/startup.sh
echo './eqlaunch zone 2>&1 > /home/eqemu/server/logs/zones.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo The server is mostly ready... give it a couple of minutes ' >> /home/eqemu/server/startup.sh
echo 'echo to load stuff from the databases for the zones and users ' >> /home/eqemu/server/startup.sh
echo 'echo can start logging in. ' >> /home/eqemu/server/startup.sh
chmod ugo+x /home/eqemu/server/startup.sh
#
# CREATE db.ini (Should be deprecated, uncommented for testing - X)
#
echo '+--------------------------------------------------------------+'
echo '! Writing db.ini !'
echo '+--------------------------------------------------------------+'
echo '[Database] ' > /home/eqemu/server/db.ini
echo "host=$EXT_IP " >> /home/eqemu/server/db.ini
echo 'user=eqemu ' >> /home/eqemu/server/db.ini
echo "password=$EQEMUPASS " >> /home/eqemu/server/db.ini
echo 'database=peqdb ' >> /home/eqemu/server/db.ini
#
# CREATE login.ini (Fixed for variables use - X.)
#
echo '+--------------------------------------------------------------+'
echo '! Writing login.ini !'
echo '+--------------------------------------------------------------+'
echo '[database] ' > /home/eqemu/server/login.ini
echo "host = $EXT_IP " >> /home/eqemu/server/login.ini
echo 'port = 3306 ' >> /home/eqemu/server/login.ini
echo 'db = peqdb ' >> /home/eqemu/server/login.ini
echo 'user = eqemu ' >> /home/eqemu/server/login.ini
echo "password = $EQEMUPASS " >> /home/eqemu/server/login.ini
echo 'subsystem = MySQL ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[options] ' >> /home/eqemu/server/login.ini
echo 'unregistered_allowed = TRUE ' >> /home/eqemu/server/login.ini
echo 'reject_duplicate_servers = FALSE ' >> /home/eqemu/server/login.ini
echo 'trace = TRUE ' >> /home/eqemu/server/login.ini
echo 'world_trace = FALSE ' >> /home/eqemu/server/login.ini
echo 'dump_packets_in = FALSE ' >> /home/eqemu/server/login.ini
echo 'dump_packets_out = FALSE ' >> /home/eqemu/server/login.ini
echo 'listen_port = 5998 ' >> /home/eqemu/server/login.ini
echo "local_network = $EXT_IP " >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[security] ' >> /home/eqemu/server/login.ini
echo 'plugin = EQEmuAuthCrypto ' >> /home/eqemu/server/login.ini
echo 'mode = 5 ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[Titanium] ' >> /home/eqemu/server/login.ini
echo 'port = 5998 ' >> /home/eqemu/server/login.ini
echo 'opcodes = login_opcodes.conf ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[SoD] ' >> /home/eqemu/server/login.ini
echo 'port = 5999 ' >> /home/eqemu/server/login.ini
echo 'opcodes = login_opcodes_sod.conf ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[schema] ' >> /home/eqemu/server/login.ini
echo 'account_table = tblLoginServerAccounts ' >> /home/eqemu/server/login.ini
echo 'world_registration_table = tblWorldServerRegistration ' >> /home/eqemu/server/login.ini
echo 'world_admin_registration_table = tblServerAdminRegistration ' >> /home/eqemu/server/login.ini
echo 'world_server_type_table = tblServerListType ' >> /home/eqemu/server/login.ini
#
# CREATE LoginServer.ini (Should be deprecated, uncommented for testing - X)
#
echo '+--------------------------------------------------------------+ '
echo '! Writing LoginServer.ini !'
echo '+--------------------------------------------------------------+ '
echo '[LoginServer] ' > /home/eqemu/server/LoginServer.ini
echo 'loginserver=EQEMU-SERVER ' >> /home/eqemu/server/LoginServer.ini
echo 'loginport=5998 ' >> /home/eqemu/server/LoginServer.ini
echo "worldname=$EMU_LONG_NAME " >> /home/eqemu/server/LoginServer.ini
echo "worldaddress=$EXT_IP " >> /home/eqemu/server/LoginServer.ini
echo 'locked=false ' >> /home/eqemu/server/LoginServer.ini
echo 'account= ' >> /home/eqemu/server/LoginServer.ini
echo 'password= ' >> /home/eqemu/server/LoginServer.ini
echo ' ' >> /home/eqemu/server/LoginServer.ini
echo '[WorldServer] ' >> /home/eqemu/server/LoginServer.ini
echo 'Defaultstatus=0 ' >> /home/eqemu/server/LoginServer.ini
echo 'Unavailzone= ' >> /home/eqemu/server/LoginServer.ini
echo ' ' >> /home/eqemu/server/LoginServer.ini
echo '[ChatChannelServer] ' >> /home/eqemu/server/LoginServer.ini
echo 'worldshortname=- ' >> /home/eqemu/server/LoginServer.ini
echo 'chataddress= ' >> /home/eqemu/server/LoginServer.ini
echo 'chatport= ' >> /home/eqemu/server/LoginServer.ini
#
# CREATE eqemu_config.xml (Fixed for variables use - X)
#
echo '+--------------------------------------------------------------+ '
echo '! Writing eqemu_config.xml !'
echo '+--------------------------------------------------------------+ '
echo '<?xml version="1.0"> ' > /home/eqemu/server/eqemu_config.xml
echo '<server> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <world> ' >> /home/eqemu/server/eqemu_config.xml
echo " <shortname>$EMU_SHORT_NAME</shortname> " >> /home/eqemu/server/eqemu_config.xml
echo " <longname>$EMU_LONG_NAME</longname> " >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <address>EQEMU-SERVER</address> --> ' >> /home/eqemu/server/eqemu_config.xml
echo " <localaddress>$EXT_IP</localaddress> --> " >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Loginserver information. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <loginserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>5998</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <account>Admin</account> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <password>Password</password> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </loginserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Server status. Default is unlocked --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!--<locked/>--> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <unlocked/> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo " <tcp ip=$EXT_IP port=9000 telnet=enable /> " >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <key>some long random string</key> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <http port="9080" enabled="true" mimefile="mime.types" /> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </world> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Chatserver (channels) information. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <chatserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>7778</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </chatserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <mailserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>7779</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </mailserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <zones> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <defaultstatus>20</defaultstatus> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <ports low="7000" high="7100"/> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </zones> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <database> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>3306</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <username>eqemu</username> ' >> /home/eqemu/server/eqemu_config.xml
echo " <password>$EQEMUPASS</password> " >> /home/eqemu/server/eqemu_config.xml
echo ' <db>peqdb</db> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </database> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Launcher Configuration --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <launcher> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <logprefix>logs/zone-</logprefix> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <logsuffix>.log</logsuffix> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <exe>zone.exe or ./zone</exe> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <timers restart="10000" reterminate="10000"> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </launcher> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- File locations. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <files> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <spells>spells_us.txt</spells> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <opcodes>opcodes.conf</opcodes> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <logsettings>log.ini</logsettings> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </files> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Directory locations. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <directories> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <maps>/home/eqemu/server/Maps</maps> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <quests>/home/eqemu/server/quests</quests> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <plugins>/home/eqemu/server/plugins</plugins> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </directories> ' >> /home/eqemu/server/eqemu_config.xml
echo '</server> ' >> /home/eqemu/server/eqemu_config.xml
chmod -R ugo+rw /home/eqemu
echo "killall eqlaunch world zone loginserver " > /home/eqemu/server/killeq.sh
chmod -R ugo+x /home/eqemu/server/killeq.sh
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Done with the installation !'
#
# I dont think this is needed anymore - X.
#
#echo '! !'
#echo '! Please copy spells_us.txt to the !'
#echo '! /home/eqemu/server directory now. !'
#echo '! !'
echo '!--------------------------------------------------------------!'
#echo '! Then you can reboot your machine and run !'
echo '! to start your server run !'
echo '! /home/eqemu/server/startup.sh !'
echo '! and to stop your server run !'
echo '! /home/eqemu/server/killeq.sh !'
echo '+--------------------------------------------------------------+ '
|
 |
|
 |
02-28-2013, 09:35 AM
|
|
Sarnak
|
|
Join Date: Apr 2006
Posts: 40
|
|
Once the script is working, it can easily be adapted to be a "Resource and recompile" version, but there's no point in investing time in that until we have a working system in the first place.
EDIT: Just looked at the changelog. Interesting - however, it does not tell me what the name of the folder should be. Digging.
|
|
|
|
02-28-2013, 10:44 AM
|
|
Sarnak
|
|
Join Date: Apr 2006
Posts: 40
|
|
Script update. Shared memory change fixed.
Code:
clear
#
# GITHUB VERSION, CURRENTLY ALPHA TEST
#
# Compiles as standard on 32 bit Debian/Ubuntu.
# To change this to compile on 64 bit machines, scroll down
# to the crypt section, which needs to be changed.
#
# THESE ARE THE VARIABLES, PLEASE CHANGE TO SUIT YOUR NEEDS
# (Added more explanation + more variables - X.)
#
# Self-explanatory First Account Name and Password
#
FIRST_ACCT_NAME="test"
FIRST_ACCT_PW="account"
#
# Emulator Short name for loginserver, Long name for EQ
# Change to fit your needs.
#
EMU_SHORT_NAME="SCRIPTEDLINUX"
EMU_LONG_NAME="ScriptedLinux"
#
# Database Root password and EQEMU password,
# so your server is more secure (non-default passwords)
#
ROOTPASS="eqemu"
EQEMUPASS="eqemupw"
#
# Your IP - do not touch unless you know what you're doing,
# autodetect does not work, or you are compiling for a
# different machine.
#
EXT_IP=`ifconfig eth0 | grep "inet addr:" | awk -F: '{ print $2 }' | awk
'{ print $1 }'`
#
#
echo ' '
echo ' ################################################# '
echo " ### Xumtiil's adaptation of : ### "
echo " ### Tim's EQEQMU Installer Version 1.0 ### "
echo ' ### Author : Tim Little (Original) ### '
echo ' ### Raf Lejeune (CMAKE, fixes, vars) ### '
echo ' ### Date : 2012-03-10 // 2013-02-21 ### '
echo ' ################################################# '
echo ' '
echo ' ================================================= '
echo ' === So easy, a complete git could do it... === '
echo ' === This script was made so that a person === '
echo ' === could get a eqemu installed and running === '
echo ' === on a Ubuntu/Debian server within less === '
echo ' === than an hour and with the LEAST amount === '
echo ' === of file editing and complex stuff! === '
echo ' ================================================= '
echo ' '
echo "Your current eth0 IP is set to $EXT_IP."
echo "That address will be used in all the configuration files."
echo ' '
echo '+--------------------------------------------------------------+'
echo '! About to start installing. !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
cd /home
#
# Change the sysctl.conf to reflect the sharedmem parameter change
# This should take far less than a second. Should require root.
#
cp /etc/sysctl.conf /etc/sysctl.conf_original
grep -v "kernel.shm" /etc/sysctl.conf | grep -v "TJL" > /etc/new_sysctl.conf
mv /etc/new_sysctl.conf /etc/sysctl.conf
echo "# added by TJL - 2012-02-27 for eqemu" >> /etc/sysctl.conf
echo "kernel.shmmax = 134217728" >> /etc/sysctl.conf
echo "kernel.shmall=65536" >> /etc/sysctl.conf
echo ' '
echo '+--------------------------------------------------------------+'
echo '! Modified sysctl !'
echo '! About to install packages as needed. !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Removing eqemu directories, if they exist.
#
rm -rf /home/eqemu
#
# If user eqemu does not exist, it will give a tiny error message
# but it will be swallowed up in the huge list of packages that
# mercifully scroll past.
# userdel eqemu
useradd eqemu
#
# Update package list
#
apt-get clean
apt-get update
#
# Thus is the first critical part...
# It installs all the needed packages...
# So you don't have to! (added cmake, git - X.)
# If you are getting problems at this point, check your sources.list
# (Usually at /etc/apt/sources.list - make sure you have security in there)
#
apt-get -y install git git-core gcc g++ cpp libmysqlclient-dev
libio-stringy-perl
apt-get -y install zlib-bin zlibc unzip make cmake subversion
apt-get -y install libmysqlclient-dev libperl-dev mysql-client-5.1
#
echo ' '
echo '+--------------------------------------------------------------+'
echo '! About to install database server (if needed) !'
echo '! !'
echo '! Please be aware that the database server installation will !'
echo '! ask for a root password THREE TIMES! !'
echo '! !'
echo '! Each time that it asks, just hit ENTER to choose NO PASSWORD !'
echo '! !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
apt-get -y install mysql-server
#
# Once the server software is installed, the my.cnf exists, but it
# binds to localhost or 127.0.0.1 and I think that the real IP
# is a better point. So this next part changes the bind address
# automatically.
#
cat /etc/mysql/my.cnf | sed s/bind-address.*/bind-address=$EXT_IP/ > tmp.cnf
cp tmp.cnf /etc/mysql/my.cnf
#
echo ' '
echo '+--------------------------------------------------------------+'
echo '! Downloading all the source-code, maps, db stuff from the net.!'
echo '! !'
echo '! This could take a few minutes and there might be pauses,,, !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Prepare everything by making the necessary directories
#
mkdir -p /home/eqemu/server/logs
mkdir -p /home/eqemu/source
mkdir -p /home/eqemu/server/Maps
mkdir -p /home/eqemu/server/quests
mkdir -p /home/eqemu/server/plugins
mkdir -p /home/eqemu/server/shared
#
# Make sure we are about to pull everything into the right directories..
#
cd /home/eqemu/source
#
# Second critical part -- getting all the most recent code,
# database items, quests, maps and plugins from the source.
# With super-fast connection speeds, this may still take a few
# minutes.
#
# Added git repository - X.
#
git clone git://github.com/EQEmu/Server.git
svn co http://projecteqdb.googlecode.com/svn/trunk/peqdatabase
svn co http://projecteqquests.googlecode.com/svn/trunk/quests
svn co http://eqemumaps.googlecode.com/svn/trunk/Maps
svn co http://allaclone-eoc.googlecode.com/svn/trunk/
allaclone-eoc-read-only
#
# Now copy from the SOURCE directories to the SERVER directories
# as needed. Might take a bit.
#
echo '+--------------------------------------------------------------+ '
echo "! Copying some files around, we're still in business !"
echo '+--------------------------------------------------------------+ '
cp -r /home/eqemu/source/Maps/* /home/eqemu/server/Maps/
cp -r /home/eqemu/source/quests/* /home/eqemu/server/quests/
chmod --recursive ugo+rwx /home/eqemu/server/quests/
cp -r /home/eqemu/source/quests/plugins/* /home/eqemu/server/plugins/
chmod --recursive ugo+rwx /home/eqemu/server/plugins/
cp /home/eqemu/source/Server/utils/defaults/commands.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/plugin.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/worldui.pl /home/eqemu/server/
# WorldUI currently not in git repo - X.
#
# mkdir /home/eqemu/server/worldui
# cp -r /home/eqemu/source/Server/utils/defaults/worldui/
/home/eqemu/server/worldui/
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Loading the database (could take a few minutes)... !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
echo ' Loading database -- please wait... '
echo ' '
cd /home/eqemu/source/peqdatabase/
#
# Set the root DB password to $ROOTPASS
# Creating eqemu user with initial password to $EQEMUPASS
# Yeah, VARIABLES BABY! - X.
#
echo "set password for 'root'@'localhost' = PASSWORD('$ROOTPASS');" >
/home/eqemu/server/logs/db_users.sql
echo "GRANT ALL PRIVILEGES ON *.* TO 'eqemu'@'%' IDENTIFIED BY
'$EQEMUPASS';" >> /home/eqemu/server/logs/db_users.sql
echo "flush privileges;" >> /home/eqemu/server/logs/db_users.sql
mysql -u root < /home/eqemu/server/logs/db_users.sql
rm -rf /home/eqemu/server/logs/db_users.sql
#
# Get ready to load the database
#
mysql -u root -p$ROOTPASS -e "drop database if exists peqdb; create
database if not exists peqdb;"
gunzip peqdb_rev*.sql.gz
mysql -u root -p$ROOTPASS -f -D peqdb <
/home/eqemu/source/peqdatabase/peqdb_*.sql
# that might take a little time -- just under two minutes on my machine...
mysql -u root -p$ROOTPASS -f -D peqdb <
/home/eqemu/source/peqdatabase/load_player.sql
mysql -u root -p$ROOTPASS -f -D peqdb <
/home/eqemu/source/peqdatabase/load_login.sql
mysql -u root -p$ROOTPASS -f -D peqdb <
/home/eqemu/source/peqdatabase/load_bots.sql
mysql -uroot -p$ROOTPASS -D peqdb <
/home/eqemu/source/Server/loginserver/login_util/EQEmuLoginServerDBInstall.sql
#
# Now we load that first account so we can have a GM account (or just
muck around)
#
echo "insert into tblLoginServerAccounts (AccountName, AccountPassword )
values('xFN', sha('xPW') );" | sed s/xFN/$FIRST_ACCT_NAME/ | sed
s/xPW/$FIRST_ACCT_PW/ > lsa.sql
mysql -uroot -p$ROOTPASS -D peqdb < lsa.sql
echo "UPDATE tblWorldServerRegistration SET ServerLongName = 'xLN',
ServerShortName = 'xSN' WHERE ServerID = 1;" | sed
s/xLN/$EMU_LONG_NAME/| sed s/xSN/$EMU_SHORT_NAME/ > wsr.sql
mysql -uroot -p$ROOTPASS -D peqdb < wsr.sql
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Moving ini and conf files around. !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
cd /home/eqemu/server
cp /home/eqemu/source/Server/utils/defaults/eqemu_config.xml.full
eqemu_config.xml
cp /home/eqemu/source/Server/utils/defaults/log.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes.conf .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes_sod.conf .
cp /home/eqemu/source/Server/utils/patches/*.conf .
#
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! About to compile source code for a lot of stuff... !'
echo '! Expect this to take at least several minutes -- !'
echo '! Dont be surprised if this takes up to 20ish minutes. !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
#
# Fixed that they need the crypt files during the single make, not after. X
# These are the 32bit crypt files - 64 bits commented out inline.
# Switch comments for 64-bit OS. (Different process for GIT-based
compile - X)
#
cd /home/eqemu/source/Server/dependencies
# 32 bits
wget -c
http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x86.zip
# 64 bits
# wget -c
http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x64.zip
rm -rf libEQEmuAuthCrypto.a
rm -rf libcryptopp.a
unzip ubu*.zip
#
# Added CMAKE section, to be able to use make later on. X.
#
echo
echo ' '
echo ' +--------------------------------------------------------------+'
echo ' Now CMAKE: Do not take advanced options, '
echo ' Make sure you have the Loginserver to ON, as well as'
echo ' EQEMU_ENABLE_RVALUE_MOVE to ON'
echo ' If it starts asking for unknown PATHS, something broke. Restart. '
echo ' +--------------------------------------------------------------+'
echo ' '
mkdir /home/eqemu/source/build
cd /home/eqemu/source/build
cmake -G "Unix Makefiles" -i /home/eqemu/source/Server/
make clean &> /home/eqemu/clean_eqemuserver.log
echo ' '
echo ' Compiling source-code -- please wait... '
echo ' '
make &> /home/eqemu/compile_eqemuserver.log
#
# takes 12 minutes (tested with make -j, craps out. Won't suggest it - X)
# check that log file with nano just to see that there were no errors..
# if there were errors, then they'd probably be on the screen too, so
only panic
# if you see a problem on-screen
#
# or use tail /home/eqemu/compile_eqemuserver.log
# to see the last lines - if it hits 100%, you're done - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Making links to compiled executables in the server directory.!'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Fixed the links to take new build process into account - X.
#
ln -s /home/eqemu/source/build/Bin/shared_memory
/home/eqemu/server/shared_memory
ln -s /home/eqemu/source/build/Bin/world /home/eqemu/server/world
ln -s /home/eqemu/source/build/Bin/zone /home/eqemu/server/zone
ln -s /home/eqemu/source/build/Bin/loginserver
/home/eqemu/server/loginserver
ln -s /home/eqemu/source/build/Bin/eqlaunch /home/eqemu/server/eqlaunch
ln -s /home/eqemu/source/build/Bin/chatserver /home/eqemu/server/chatserver
ln -s /home/eqemu/source/build/Bin/mailserver /home/eqemu/server/mailserver
#
cd /home/eqemu/server
#
# Adapted startup script, EQEmuLoginServer is no longer used, it is now
# just loginserver, as well as some other fixes - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Writing Startup Script... !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
echo 'ulimit -c unlimited ' > /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'cd /home/eqemu/server ' >> /home/eqemu/server/startup.sh
echo 'export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:. ' >>
/home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'rm -rf /home/eqemu/server/logs/*.log ' >>
/home/eqemu/server/startup.sh
echo 'chmod --recursive ugo+rwx /home/eqemu/server/quests ' >>
/home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Starting Login Server... ' >> /home/eqemu/server/startup.sh
echo ' ./loginserver 2>&1 >> /home/eqemu/server/logs/login.log & ' >>
/home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting about 5 seconds before starting World Server... ' >>
/home/eqemu/server/startup.sh
echo 'sleep 5 ' >> /home/eqemu/server/startup.sh
echo './shared_memory 2>&1 >> /home/eqemu/server/logs/sharedmem.log' >>
/home/eqemu/server/startup.sh
echo 'sleep 3 ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo './world 2>&1 > /home/eqemu/server/logs/world.log & ' >>
/home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting 10 seconds before starting the zones via launcher '
>> /home/eqemu/server/startup.sh
echo 'sleep 10 ' >> /home/eqemu/server/startup.sh
echo './eqlaunch zone 2>&1 > /home/eqemu/server/logs/zones.log & ' >>
/home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo The server is mostly ready... give it a couple of minutes '
>> /home/eqemu/server/startup.sh
echo 'echo to load stuff from the databases for the zones and users ' >>
/home/eqemu/server/startup.sh
echo 'echo can start logging in. ' >> /home/eqemu/server/startup.sh
chmod ugo+x /home/eqemu/server/startup.sh
#
# CREATE db.ini (Should be deprecated, uncommented for testing - X)
#
echo '+--------------------------------------------------------------+'
echo '! Writing db.ini !'
echo '+--------------------------------------------------------------+'
echo '[Database] ' > /home/eqemu/server/db.ini
echo "host=$EXT_IP " >> /home/eqemu/server/db.ini
echo 'user=eqemu ' >> /home/eqemu/server/db.ini
echo "password=$EQEMUPASS " >> /home/eqemu/server/db.ini
echo 'database=peqdb ' >> /home/eqemu/server/db.ini
#
# CREATE login.ini (Fixed for variables use - X.)
#
echo '+--------------------------------------------------------------+'
echo '! Writing login.ini !'
echo '+--------------------------------------------------------------+'
echo '[database] ' > /home/eqemu/server/login.ini
echo "host = $EXT_IP " >> /home/eqemu/server/login.ini
echo 'port = 3306 ' >> /home/eqemu/server/login.ini
echo 'db = peqdb ' >> /home/eqemu/server/login.ini
echo 'user = eqemu ' >> /home/eqemu/server/login.ini
echo "password = $EQEMUPASS " >> /home/eqemu/server/login.ini
echo 'subsystem = MySQL ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[options] ' >> /home/eqemu/server/login.ini
echo 'unregistered_allowed = TRUE ' >> /home/eqemu/server/login.ini
echo 'reject_duplicate_servers = FALSE ' >> /home/eqemu/server/login.ini
echo 'trace = TRUE ' >> /home/eqemu/server/login.ini
echo 'world_trace = FALSE ' >> /home/eqemu/server/login.ini
echo 'dump_packets_in = FALSE ' >> /home/eqemu/server/login.ini
echo 'dump_packets_out = FALSE ' >> /home/eqemu/server/login.ini
echo 'listen_port = 5998 ' >> /home/eqemu/server/login.ini
echo "local_network = $EXT_IP " >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[security] ' >> /home/eqemu/server/login.ini
echo 'plugin = EQEmuAuthCrypto ' >> /home/eqemu/server/login.ini
echo 'mode = 5 ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[Titanium] ' >> /home/eqemu/server/login.ini
echo 'port = 5998 ' >> /home/eqemu/server/login.ini
echo 'opcodes = login_opcodes.conf ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[SoD] ' >> /home/eqemu/server/login.ini
echo 'port = 5999 ' >> /home/eqemu/server/login.ini
echo 'opcodes = login_opcodes_sod.conf ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[schema] ' >> /home/eqemu/server/login.ini
echo 'account_table = tblLoginServerAccounts ' >>
/home/eqemu/server/login.ini
echo 'world_registration_table = tblWorldServerRegistration ' >>
/home/eqemu/server/login.ini
echo 'world_admin_registration_table = tblServerAdminRegistration ' >>
/home/eqemu/server/login.ini
echo 'world_server_type_table = tblServerListType ' >>
/home/eqemu/server/login.ini
#
# CREATE LoginServer.ini (Should be deprecated, uncommented for testing - X)
#
echo '+--------------------------------------------------------------+ '
echo '! Writing LoginServer.ini !'
echo '+--------------------------------------------------------------+ '
echo '[LoginServer] ' > /home/eqemu/server/LoginServer.ini
echo 'loginserver=EQEMU-SERVER ' >> /home/eqemu/server/LoginServer.ini
echo 'loginport=5998 ' >> /home/eqemu/server/LoginServer.ini
echo "worldname=$EMU_LONG_NAME " >> /home/eqemu/server/LoginServer.ini
echo "worldaddress=$EXT_IP " >> /home/eqemu/server/LoginServer.ini
echo 'locked=false ' >> /home/eqemu/server/LoginServer.ini
echo 'account= ' >> /home/eqemu/server/LoginServer.ini
echo 'password= ' >> /home/eqemu/server/LoginServer.ini
echo ' ' >> /home/eqemu/server/LoginServer.ini
echo '[WorldServer] ' >> /home/eqemu/server/LoginServer.ini
echo 'Defaultstatus=0 ' >> /home/eqemu/server/LoginServer.ini
echo 'Unavailzone= ' >> /home/eqemu/server/LoginServer.ini
echo ' ' >> /home/eqemu/server/LoginServer.ini
echo '[ChatChannelServer] ' >> /home/eqemu/server/LoginServer.ini
echo 'worldshortname=- ' >> /home/eqemu/server/LoginServer.ini
echo 'chataddress= ' >> /home/eqemu/server/LoginServer.ini
echo 'chatport= ' >> /home/eqemu/server/LoginServer.ini
#
# CREATE eqemu_config.xml (Fixed for variables use - X)
#
echo '+--------------------------------------------------------------+ '
echo '! Writing eqemu_config.xml !'
echo '+--------------------------------------------------------------+ '
echo '<?xml version="1.0"> ' > /home/eqemu/server/eqemu_config.xml
echo '<server> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <world> ' >> /home/eqemu/server/eqemu_config.xml
echo " <shortname>$EMU_SHORT_NAME</shortname> " >>
/home/eqemu/server/eqemu_config.xml
echo " <longname>$EMU_LONG_NAME</longname> " >>
/home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <address>EQEMU-SERVER</address> --> ' >>
/home/eqemu/server/eqemu_config.xml
echo " <localaddress>$EXT_IP</localaddress> --> " >>
/home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Loginserver information. Defaults shown --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <loginserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>5998</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <account>Admin</account> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <password>Password</password> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' </loginserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Server status. Default is unlocked --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <!--<locked/>--> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <unlocked/> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo " <tcp ip=$EXT_IP port=9000 telnet=enable /> " >>
/home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <key>some long random string</key> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <http port="9080" enabled="true" mimefile="mime.types" /> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' </world> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Chatserver (channels) information. Defaults shown --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <chatserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>7778</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </chatserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <mailserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>7779</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </mailserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <zones> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <defaultstatus>20</defaultstatus> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <ports low="7000" high="7100"/> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' </zones> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <database> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>3306</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <username>eqemu</username> ' >> /home/eqemu/server/eqemu_config.xml
echo " <password>$EQEMUPASS</password> " >>
/home/eqemu/server/eqemu_config.xml
echo ' <db>peqdb</db> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </database> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Launcher Configuration --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <launcher> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <logprefix>logs/zone-</logprefix> --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <!-- <logsuffix>.log</logsuffix> --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <!-- <exe>zone.exe or ./zone</exe> --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <!-- <timers restart="10000" reterminate="10000"> --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' </launcher> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- File locations. Defaults shown --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <files> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <spells>spells_us.txt</spells> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <opcodes>opcodes.conf</opcodes> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <logsettings>log.ini</logsettings> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' </files> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Directory locations. Defaults shown --> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <directories> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <maps>/home/eqemu/server/Maps</maps> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <quests>/home/eqemu/server/quests</quests> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' <plugins>/home/eqemu/server/plugins</plugins> ' >>
/home/eqemu/server/eqemu_config.xml
echo ' </directories> ' >> /home/eqemu/server/eqemu_config.xml
echo '</server> ' >> /home/eqemu/server/eqemu_config.xml
chmod -R ugo+rw /home/eqemu
echo "killall eqlaunch world zone loginserver " >
/home/eqemu/server/killeq.sh
chmod -R ugo+x /home/eqemu/server/killeq.sh
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Done with the installation !'
#
# I dont think this is needed anymore - X.
#
#echo '! !'
#echo '! Please copy spells_us.txt to the !'
#echo '! /home/eqemu/server directory now. !'
#echo '! !'
echo '!--------------------------------------------------------------!'
#echo '! Then you can reboot your machine and run !'
echo '! to start your server run !'
echo '! /home/eqemu/server/startup.sh !'
echo '! and to stop your server run !'
echo '! /home/eqemu/server/killeq.sh !'
echo '+--------------------------------------------------------------+ '
|
|
|
|
02-28-2013, 08:21 PM
|
|
Sarnak
|
|
Join Date: Sep 2011
Posts: 51
|
|
just got this;
A trunk/icontest.php
Checked out revision 5.
./install_eqemu.sh: line 164: allaclone-eoc-read-only: command not found
+--------------------------------------------------------------+
! Copying some files around, we're still in business !
+--------------------------------------------------------------+
./install_eqemu.sh: line 185: /home/eqemu/server/worldui/: No such file or directory
+--------------------------------------------------------------+
! Loading the database (could take a few minutes)... !
+--------------------------------------------------------------+
[ Press [ENTER] to continue... ]
Loading database -- please wait...
./install_eqemu.sh: line 201: syntax error near unexpected token `newline'
./install_eqemu.sh: line 201: `echo "set password for 'root'@'localhost' = PASSWORD('$ROOTPASS');" > '
root@EQEMU-SERVER:/home#
is this error in the script or in a file ?
|
|
|
|
02-28-2013, 08:44 PM
|
|
Sarnak
|
|
Join Date: Apr 2006
Posts: 40
|
|
Bug in the code, memo to me - don't paste with the tablet, it stinks (it put stuff on new lines, which obviously makes code break - uncommenting parts of comments and stuff like that)
Should be fixed below
Code:
clear
#
# GITHUB VERSION, CURRENTLY ALPHA TEST
#
# Compiles as standard on 32 bit Debian/Ubuntu.
# To change this to compile on 64 bit machines, scroll down
# to the crypt section, which needs to be changed.
#
# THESE ARE THE VARIABLES, PLEASE CHANGE TO SUIT YOUR NEEDS
# (Added more explanation + more variables - X.)
#
# Self-explanatory First Account Name and Password
#
FIRST_ACCT_NAME="test"
FIRST_ACCT_PW="account"
#
# Emulator Short name for loginserver, Long name for EQ
# Change to fit your needs.
#
EMU_SHORT_NAME="SCRIPTEDLINUX"
EMU_LONG_NAME="ScriptedLinux"
#
# Database Root password and EQEMU password,
# so your server is more secure (non-default passwords)
#
ROOTPASS="eqemu"
EQEMUPASS="eqemupw"
#
# Your IP - do not touch unless you know what you're doing,
# autodetect does not work, or you are compiling for a
# different machine.
#
EXT_IP=`ifconfig eth0 | grep "inet addr:" | awk -F: '{ print $2 }' | awk '{ print $1 }'`
#
#
echo ' '
echo ' ################################################# '
echo " ### Xumtiil's adaptation of : ### "
echo " ### Tim's EQEQMU Installer Version 1.0 ### "
echo ' ### Author : Tim Little (Original) ### '
echo ' ### Raf Lejeune (CMAKE, fixes, vars) ### '
echo ' ### Date : 2012-03-10 // 2013-02-21 ### '
echo ' ################################################# '
echo ' '
echo ' ================================================= '
echo ' === So easy, a complete git could do it... === '
echo ' === This script was made so that a person === '
echo ' === could get a eqemu installed and running === '
echo ' === on a Ubuntu/Debian server within less === '
echo ' === than an hour and with the LEAST amount === '
echo ' === of file editing and complex stuff! === '
echo ' ================================================= '
echo ' '
echo "Your current eth0 IP is set to $EXT_IP."
echo "That address will be used in all the configuration files."
echo ' '
echo '+--------------------------------------------------------------+'
echo '! About to start installing. !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
cd /home
#
# Change the sysctl.conf to reflect the sharedmem parameter change
# This should take far less than a second. Should require root.
#
cp /etc/sysctl.conf /etc/sysctl.conf_original
grep -v "kernel.shm" /etc/sysctl.conf | grep -v "TJL" > /etc/new_sysctl.conf
mv /etc/new_sysctl.conf /etc/sysctl.conf
echo "# added by TJL - 2012-02-27 for eqemu" >> /etc/sysctl.conf
echo "kernel.shmmax = 134217728" >> /etc/sysctl.conf
echo "kernel.shmall=65536" >> /etc/sysctl.conf
echo ' '
echo '+--------------------------------------------------------------+'
echo '! Modified sysctl !'
echo '! About to install packages as needed. !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Removing eqemu directories, if they exist.
#
rm -rf /home/eqemu
#
# If user eqemu does not exist, it will give a tiny error message
# but it will be swallowed up in the huge list of packages that
# mercifully scroll past.
# userdel eqemu
useradd eqemu
#
# Update package list
#
apt-get clean
apt-get update
#
# Thus is the first critical part...
# It installs all the needed packages...
# So you don't have to! (added cmake, git - X.)
# If you are getting problems at this point, check your sources.list
# (Usually at /etc/apt/sources.list - make sure you have security in there)
#
apt-get -y install git git-core gcc g++ cpp libmysqlclient-dev libio-stringy-perl
apt-get -y install zlib-bin zlibc unzip make cmake subversion
apt-get -y install libmysqlclient-dev libperl-dev mysql-client-5.1
#
echo ' '
echo '+--------------------------------------------------------------+'
echo '! About to install database server (if needed) !'
echo '! !'
echo '! Please be aware that the database server installation will !'
echo '! ask for a root password THREE TIMES! !'
echo '! !'
echo '! Each time that it asks, just hit ENTER to choose NO PASSWORD !'
echo '! !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
apt-get -y install mysql-server
#
# Once the server software is installed, the my.cnf exists, but it
# binds to localhost or 127.0.0.1 and I think that the real IP
# is a better point. So this next part changes the bind address
# automatically.
#
cat /etc/mysql/my.cnf | sed s/bind-address.*/bind-address=$EXT_IP/ > tmp.cnf
cp tmp.cnf /etc/mysql/my.cnf
#
echo ' '
echo '+--------------------------------------------------------------+'
echo '! Downloading all the source-code, maps, db stuff from the net.!'
echo '! !'
echo '! This could take a few minutes and there might be pauses,,, !'
echo '+--------------------------------------------------------------+'
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Prepare everything by making the necessary directories
#
mkdir -p /home/eqemu/server/logs
mkdir -p /home/eqemu/source
mkdir -p /home/eqemu/server/Maps
mkdir -p /home/eqemu/server/quests
mkdir -p /home/eqemu/server/plugins
mkdir -p /home/eqemu/server/shared
#
# Make sure we are about to pull everything into the right directories..
#
cd /home/eqemu/source
#
# Second critical part -- getting all the most recent code,
# database items, quests, maps and plugins from the source.
# With super-fast connection speeds, this may still take a few
# minutes.
#
# Added git repository - X.
#
git clone git://github.com/EQEmu/Server.git
svn co http://projecteqdb.googlecode.com/svn/trunk/peqdatabase
svn co http://projecteqquests.googlecode.com/svn/trunk/quests
svn co http://eqemumaps.googlecode.com/svn/trunk/Maps
svn co http://allaclone-eoc.googlecode.com/svn/trunk/ allaclone-eoc-read-only
#
# Now copy from the SOURCE directories to the SERVER directories
# as needed. Might take a bit.
#
echo '+--------------------------------------------------------------+ '
echo "! Copying some files around, we're still in business !"
echo '+--------------------------------------------------------------+ '
cp -r /home/eqemu/source/Maps/* /home/eqemu/server/Maps/
cp -r /home/eqemu/source/quests/* /home/eqemu/server/quests/
chmod --recursive ugo+rwx /home/eqemu/server/quests/
cp -r /home/eqemu/source/quests/plugins/* /home/eqemu/server/plugins/
chmod --recursive ugo+rwx /home/eqemu/server/plugins/
cp /home/eqemu/source/Server/utils/defaults/commands.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/plugin.pl /home/eqemu/server/
cp /home/eqemu/source/Server/utils/defaults/worldui.pl /home/eqemu/server/
# WorldUI currently not in git repo - X.
#
# mkdir /home/eqemu/server/worldui
# cp -r /home/eqemu/source/Server/utils/defaults/worldui/ /home/eqemu/server/worldui/
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Loading the database (could take a few minutes)... !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
echo ' Loading database -- please wait... '
echo ' '
cd /home/eqemu/source/peqdatabase/
#
# Set the root DB password to $ROOTPASS
# Creating eqemu user with initial password to $EQEMUPASS
# Yeah, VARIABLES BABY! - X.
#
echo "set password for 'root'@'localhost' = PASSWORD('$ROOTPASS');" > /home/eqemu/server/logs/db_users.sql
echo "GRANT ALL PRIVILEGES ON *.* TO 'eqemu'@'%' IDENTIFIED BY '$EQEMUPASS';" >> /home/eqemu/server/logs/db_users.sql
echo "flush privileges;" >> /home/eqemu/server/logs/db_users.sql
mysql -u root < /home/eqemu/server/logs/db_users.sql
rm -rf /home/eqemu/server/logs/db_users.sql
#
# Get ready to load the database
#
mysql -u root -p$ROOTPASS -e "drop database if exists peqdb; create database if not exists peqdb;"
gunzip peqdb_rev*.sql.gz
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/peqdb_*.sql
# that might take a little time -- just under two minutes on my machine...
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/load_player.sql
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/load_login.sql
mysql -u root -p$ROOTPASS -f -D peqdb < /home/eqemu/source/peqdatabase/load_bots.sql
mysql -uroot -p$ROOTPASS -D peqdb < /home/eqemu/source/Server/loginserver/login_util/EQEmuLoginServerDBInstall.sql
#
# Now we load that first account so we can have a GM account (or just
muck around)
#
echo "insert into tblLoginServerAccounts (AccountName, AccountPassword ) values('xFN', sha('xPW') );" | sed s/xFN/$FIRST_ACCT_NAME/ | sed s/xPW/$FIRST_ACCT_PW/ > lsa.sql
mysql -uroot -p$ROOTPASS -D peqdb < lsa.sql
echo "UPDATE tblWorldServerRegistration SET ServerLongName = 'xLN', ServerShortName = 'xSN' WHERE ServerID = 1;" | sed s/xLN/$EMU_LONG_NAME/| sed s/xSN/$EMU_SHORT_NAME/ > wsr.sql
mysql -uroot -p$ROOTPASS -D peqdb < wsr.sql
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Moving ini and conf files around. !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
cd /home/eqemu/server
cp /home/eqemu/source/Server/utils/defaults/eqemu_config.xml.full eqemu_config.xml
cp /home/eqemu/source/Server/utils/defaults/log.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login.ini .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes.conf .
cp /home/eqemu/source/Server/loginserver/login_util/login_opcodes_sod.conf .
cp /home/eqemu/source/Server/utils/patches/*.conf .
#
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! About to compile source code for a lot of stuff... !'
echo '! Expect this to take at least several minutes -- !'
echo '! Dont be surprised if this takes up to 20ish minutes. !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
#
# Fixed that they need the crypt files during the single make, not after. X
# These are the 32bit crypt files - 64 bits commented out inline.
# Switch comments for 64-bit OS. (Different process for GIT-based
compile - X)
#
cd /home/eqemu/source/Server/dependencies
# 32 bits
wget -c http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x86.zip
# 64 bits
# wget -c http://projecteqemu.googlecode.com/files/ubuntu_LoginServerCrypto_x64.zip
rm -rf libEQEmuAuthCrypto.a
rm -rf libcryptopp.a
unzip ubu*.zip
#
# Added CMAKE section, to be able to use make later on. X.
#
echo
echo ' '
echo ' +--------------------------------------------------------------+'
echo ' Now CMAKE: Do not take advanced options, '
echo ' Make sure you have the Loginserver to ON, as well as'
echo ' EQEMU_ENABLE_RVALUE_MOVE to ON'
echo ' If it starts asking for unknown PATHS, something broke. Restart. '
echo ' +--------------------------------------------------------------+'
echo ' '
mkdir /home/eqemu/source/build
cd /home/eqemu/source/build
cmake -G "Unix Makefiles" -i /home/eqemu/source/Server/
make clean &> /home/eqemu/clean_eqemuserver.log
echo ' '
echo ' Compiling source-code -- please wait... '
echo ' '
make &> /home/eqemu/compile_eqemuserver.log
#
# takes 12 minutes (tested with make -j, craps out. Won't suggest it - X)
# check that log file with nano just to see that there were no errors..
# if there were errors, then they'd probably be on the screen too, so only panic
# if you see a problem on-screen
#
# or use tail /home/eqemu/compile_eqemuserver.log
# to see the last lines - if it hits 100%, you're done - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Making links to compiled executables in the server directory.!'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
#
# Fixed the links to take new build process into account - X.
#
ln -s /home/eqemu/source/build/Bin/shared_memory /home/eqemu/server/shared_memory
ln -s /home/eqemu/source/build/Bin/world /home/eqemu/server/world
ln -s /home/eqemu/source/build/Bin/zone /home/eqemu/server/zone
ln -s /home/eqemu/source/build/Bin/loginserver /home/eqemu/server/loginserver
ln -s /home/eqemu/source/build/Bin/eqlaunch /home/eqemu/server/eqlaunch
ln -s /home/eqemu/source/build/Bin/chatserver /home/eqemu/server/chatserver
ln -s /home/eqemu/source/build/Bin/mailserver /home/eqemu/server/mailserver
#
cd /home/eqemu/server
#
# Adapted startup script, EQEmuLoginServer is no longer used, it is now
# just loginserver, as well as some other fixes - X.
#
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Writing Startup Script... !'
echo '+--------------------------------------------------------------+ '
read -p "[ Press [ENTER] to continue... ]"
echo ' '
echo 'ulimit -c unlimited ' > /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'cd /home/eqemu/server ' >> /home/eqemu/server/startup.sh
echo 'export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:. ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'rm -rf /home/eqemu/server/logs/*.log ' >> /home/eqemu/server/startup.sh
echo 'chmod --recursive ugo+rwx /home/eqemu/server/quests ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Starting Login Server... ' >> /home/eqemu/server/startup.sh
echo ' ./loginserver 2>&1 >> /home/eqemu/server/logs/login.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting about 5 seconds before starting World Server... ' >> /home/eqemu/server/startup.sh
echo 'sleep 5 ' >> /home/eqemu/server/startup.sh
echo './shared_memory 2>&1 >> /home/eqemu/server/logs/sharedmem.log' >> /home/eqemu/server/startup.sh
echo 'sleep 3 ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo './world 2>&1 > /home/eqemu/server/logs/world.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo Waiting 10 seconds before starting the zones via launcher ' >> /home/eqemu/server/startup.sh
echo 'sleep 10 ' >> /home/eqemu/server/startup.sh
echo './eqlaunch zone 2>&1 > /home/eqemu/server/logs/zones.log & ' >> /home/eqemu/server/startup.sh
echo ' ' >> /home/eqemu/server/startup.sh
echo 'echo The server is mostly ready... give it a couple of minutes ' >> /home/eqemu/server/startup.sh
echo 'echo to load stuff from the databases for the zones and users ' >> /home/eqemu/server/startup.sh
echo 'echo can start logging in. ' >> /home/eqemu/server/startup.sh
chmod ugo+x /home/eqemu/server/startup.sh
#
# CREATE db.ini (Should be deprecated, uncommented for testing - X)
#
echo '+--------------------------------------------------------------+'
echo '! Writing db.ini !'
echo '+--------------------------------------------------------------+'
echo '[Database] ' > /home/eqemu/server/db.ini
echo "host=$EXT_IP " >> /home/eqemu/server/db.ini
echo 'user=eqemu ' >> /home/eqemu/server/db.ini
echo "password=$EQEMUPASS " >> /home/eqemu/server/db.ini
echo 'database=peqdb ' >> /home/eqemu/server/db.ini
#
# CREATE login.ini (Fixed for variables use - X.)
#
echo '+--------------------------------------------------------------+'
echo '! Writing login.ini !'
echo '+--------------------------------------------------------------+'
echo '[database] ' > /home/eqemu/server/login.ini
echo "host = $EXT_IP " >> /home/eqemu/server/login.ini
echo 'port = 3306 ' >> /home/eqemu/server/login.ini
echo 'db = peqdb ' >> /home/eqemu/server/login.ini
echo 'user = eqemu ' >> /home/eqemu/server/login.ini
echo "password = $EQEMUPASS " >> /home/eqemu/server/login.ini
echo 'subsystem = MySQL ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[options] ' >> /home/eqemu/server/login.ini
echo 'unregistered_allowed = TRUE ' >> /home/eqemu/server/login.ini
echo 'reject_duplicate_servers = FALSE ' >> /home/eqemu/server/login.ini
echo 'trace = TRUE ' >> /home/eqemu/server/login.ini
echo 'world_trace = FALSE ' >> /home/eqemu/server/login.ini
echo 'dump_packets_in = FALSE ' >> /home/eqemu/server/login.ini
echo 'dump_packets_out = FALSE ' >> /home/eqemu/server/login.ini
echo 'listen_port = 5998 ' >> /home/eqemu/server/login.ini
echo "local_network = $EXT_IP " >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[security] ' >> /home/eqemu/server/login.ini
echo 'plugin = EQEmuAuthCrypto ' >> /home/eqemu/server/login.ini
echo 'mode = 5 ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[Titanium] ' >> /home/eqemu/server/login.ini
echo 'port = 5998 ' >> /home/eqemu/server/login.ini
echo 'opcodes = login_opcodes.conf ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[SoD] ' >> /home/eqemu/server/login.ini
echo 'port = 5999 ' >> /home/eqemu/server/login.ini
echo 'opcodes = login_opcodes_sod.conf ' >> /home/eqemu/server/login.ini
echo ' ' >> /home/eqemu/server/login.ini
echo '[schema] ' >> /home/eqemu/server/login.ini
echo 'account_table = tblLoginServerAccounts ' >> /home/eqemu/server/login.ini
echo 'world_registration_table = tblWorldServerRegistration ' >> /home/eqemu/server/login.ini
echo 'world_admin_registration_table = tblServerAdminRegistration ' >> /home/eqemu/server/login.ini
echo 'world_server_type_table = tblServerListType ' >> /home/eqemu/server/login.ini
#
# CREATE LoginServer.ini (Should be deprecated, uncommented for testing - X)
#
echo '+--------------------------------------------------------------+ '
echo '! Writing LoginServer.ini !'
echo '+--------------------------------------------------------------+ '
echo '[LoginServer] ' > /home/eqemu/server/LoginServer.ini
echo 'loginserver=EQEMU-SERVER ' >> /home/eqemu/server/LoginServer.ini
echo 'loginport=5998 ' >> /home/eqemu/server/LoginServer.ini
echo "worldname=$EMU_LONG_NAME " >> /home/eqemu/server/LoginServer.ini
echo "worldaddress=$EXT_IP " >> /home/eqemu/server/LoginServer.ini
echo 'locked=false ' >> /home/eqemu/server/LoginServer.ini
echo 'account= ' >> /home/eqemu/server/LoginServer.ini
echo 'password= ' >> /home/eqemu/server/LoginServer.ini
echo ' ' >> /home/eqemu/server/LoginServer.ini
echo '[WorldServer] ' >> /home/eqemu/server/LoginServer.ini
echo 'Defaultstatus=0 ' >> /home/eqemu/server/LoginServer.ini
echo 'Unavailzone= ' >> /home/eqemu/server/LoginServer.ini
echo ' ' >> /home/eqemu/server/LoginServer.ini
echo '[ChatChannelServer] ' >> /home/eqemu/server/LoginServer.ini
echo 'worldshortname=- ' >> /home/eqemu/server/LoginServer.ini
echo 'chataddress= ' >> /home/eqemu/server/LoginServer.ini
echo 'chatport= ' >> /home/eqemu/server/LoginServer.ini
#
# CREATE eqemu_config.xml (Fixed for variables use - X)
#
echo '+--------------------------------------------------------------+ '
echo '! Writing eqemu_config.xml !'
echo '+--------------------------------------------------------------+ '
echo '<?xml version="1.0"> ' > /home/eqemu/server/eqemu_config.xml
echo '<server> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <world> ' >> /home/eqemu/server/eqemu_config.xml
echo " <shortname>$EMU_SHORT_NAME</shortname> " >> /home/eqemu/server/eqemu_config.xml
echo " <longname>$EMU_LONG_NAME</longname> " >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <address>EQEMU-SERVER</address> --> ' >> /home/eqemu/server/eqemu_config.xml
echo " <localaddress>$EXT_IP</localaddress> --> " >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Loginserver information. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <loginserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>5998</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <account>Admin</account> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <password>Password</password> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </loginserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Server status. Default is unlocked --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!--<locked/>--> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <unlocked/> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo " <tcp ip=$EXT_IP port=9000 telnet=enable /> " >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <key>some long random string</key> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <http port="9080" enabled="true" mimefile="mime.types" /> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </world> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Chatserver (channels) information. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <chatserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>7778</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </chatserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <mailserver> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>7779</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </mailserver> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <zones> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <defaultstatus>20</defaultstatus> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <ports low="7000" high="7100"/> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </zones> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <database> ' >> /home/eqemu/server/eqemu_config.xml
echo " <host>$EXT_IP</host> " >> /home/eqemu/server/eqemu_config.xml
echo ' <port>3306</port> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <username>eqemu</username> ' >> /home/eqemu/server/eqemu_config.xml
echo " <password>$EQEMUPASS</password> " >> /home/eqemu/server/eqemu_config.xml
echo ' <db>peqdb</db> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </database> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Launcher Configuration --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <launcher> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <logprefix>logs/zone-</logprefix> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <logsuffix>.log</logsuffix> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <exe>zone.exe or ./zone</exe> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- <timers restart="10000" reterminate="10000"> --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </launcher> ' >> /home/eqemu/server/eqemu_config.xml
echo ' ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- File locations. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <files> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <spells>spells_us.txt</spells> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <opcodes>opcodes.conf</opcodes> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <logsettings>log.ini</logsettings> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </files> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <!-- Directory locations. Defaults shown --> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <directories> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <maps>/home/eqemu/server/Maps</maps> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <quests>/home/eqemu/server/quests</quests> ' >> /home/eqemu/server/eqemu_config.xml
echo ' <plugins>/home/eqemu/server/plugins</plugins> ' >> /home/eqemu/server/eqemu_config.xml
echo ' </directories> ' >> /home/eqemu/server/eqemu_config.xml
echo '</server> ' >> /home/eqemu/server/eqemu_config.xml
chmod -R ugo+rw /home/eqemu
echo "killall eqlaunch world zone loginserver " >> /home/eqemu/server/killeq.sh
chmod -R ugo+x /home/eqemu/server/killeq.sh
echo ' '
echo '+--------------------------------------------------------------+ '
echo '! Done with the installation !'
#
# I dont think this is needed anymore - X.
#
#echo '! !'
#echo '! Please copy spells_us.txt to the !'
#echo '! /home/eqemu/server directory now. !'
#echo '! !'
echo '!--------------------------------------------------------------!'
#echo '! Then you can reboot your machine and run !'
echo '! to start your server run !'
echo '! /home/eqemu/server/startup.sh !'
echo '! and to stop your server run !'
echo '! /home/eqemu/server/killeq.sh !'
echo '+--------------------------------------------------------------+ '
|
|
|
|
02-28-2013, 09:11 PM
|
|
Sarnak
|
|
Join Date: Dec 2007
Posts: 57
|
|
LordAdakos Shouts 'ERROR MESSAGE INCOMING. TRAIN TO NEXT POST'
IMAGE HERE CHECK IT OUT
 |
03-01-2013, 04:09 AM
|
|
Sarnak
|
|
Join Date: Apr 2006
Posts: 40
|
|
As expected - Did you try with the bugfixed script for the borked tablet-based post?
|
03-01-2013, 08:14 AM
|
|
Sarnak
|
|
Join Date: Dec 2007
Posts: 57
|
|
I used the most recent post. Will attempt again. (using Ubuntu 12.04 with the script from post #23)
edit: Error
Code:
Loading the database.
./install_eqemu.sh Line 215 sytax error neat unexpected token `)'
./install_eqemu.sh line 215 `muck around)'
|
03-01-2013, 11:13 AM
|
|
Sarnak
|
|
Join Date: Sep 2011
Posts: 51
|
|
I got the same error ;
Loading the database.
./install_eqemu.sh Line 215 sytax error neat unexpected token `)'
./install_eqemu.sh line 215 `muck around)'
|
03-01-2013, 12:28 PM
|
 |
Developer
|
|
Join Date: Mar 2003
Posts: 1,490
|
|
Copy/paste issue on line 214. Just remove the carriage return.
|
03-01-2013, 03:10 PM
|
|
Sarnak
|
|
Join Date: Apr 2006
Posts: 40
|
|
Must have missed that one. Not going to bother correcting, am on tablet. Also, this script got me fired! Yay!
Le sigh.
|
03-01-2013, 09:02 PM
|
|
Sarnak
|
|
Join Date: Sep 2011
Posts: 51
|
|
Sorry to hear about getting fired, when one door closes many more open especially for people with skills.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 12:49 PM.
|
|
 |
|
 |
|
|
|
 |
|
 |
|
 |
Linear Mode
