|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Support::General Support Post all topics here having to do with errors while trying to connect to an EQEMu server but not about the setup/running of the Server itself. |
|
|
|
05-07-2011, 04:08 AM
|
Hill Giant
|
|
Join Date: May 2008
Location: sydney
Posts: 177
|
|
no zone in point
I can't zone from east commons to nektulos (i come to a dead end) and there are missing portals from PoK for rathe mountains and crescent reach which is particularly bad as i think cres reach is my home aand i was hopig to get adventurers stone. Is this a problem with my underfoot client? I've tried following http://www.eqemulator.net/wiki/wikka...ssingFilesList
and created a directory oldfiles which i populated by the batch file below, using the SoF and titanium clients. I wasn't sure if this was the best method?
I don't have #zone access to test if that works.
Can anyone advise me?
Also i thought there was a way to compact posts. I have used the Code tags, but i thought there was a method for folding it up unless people wanted to see it?
Code:
copy freportw.xmi oldfiles
copy nro.xmi oldfiles
copy nro2_chr.s3d oldfiles
copy oasis2_chr.s3d oldfiles
copy oot_chr2.s3d oldfiles
copy blackburrow_2_obj.s3d oldfiles
copy freportn.xmi oldfiles
copy nro_obj2.s3d oldfiles
copy oasis_2_obj.s3d oldfiles
copy rathemtn_chr2.s3d oldfiles
copy soltemple_chr.s3d oldfiles
copy sro_2_obj.s3d oldfiles
copy freportn_chr.s3d oldfiles
copy freportw_chr.s3d oldfiles
copy nro_chr.s3d oldfiles
copy oasis_chr.s3d oldfiles
copy sro_chr.s3d oldfiles
copy freportw_sounds.eff oldfiles
copy freportn_sounds.eff oldfiles
copy nro_sounds.eff oldfiles
copy oasis_sounds.eff oldfiles
copy soltemple_sounds.eff oldfiles
copy sro_sounds.eff oldfiles
copy freportn_sndbnk.eff oldfiles
copy freportw_sndbnk.eff oldfiles
copy nro_sndbnk.eff oldfiles
copy oasis_sndbnk.eff oldfiles
copy sro_sndbnk.eff oldfiles
copy freportw_assets.txt oldfiles
copy nro_chr.txt oldfiles
copy oasis_chr.txt oldfiles
copy soltemple_sndbnk.eff oldfiles
copy sro_chr.txt oldfiles
copy bas.eqg oldfiles
copy blackburrow_chr.s3d oldfiles
copy bothunder.mp3 oldfiles
copy bothunder.s3d oldfiles
copy bothunder_chr.s3d oldfiles
copy bothunder_chr.txt oldfiles
copy bothunder_obj.s3d oldfiles
copy dreadlands_chr.txt oldfiles
copy frozenshadow_chr.s3d oldfiles
copy gequip3.s3d oldfiles
copy gukg_chr.txt oldfiles
copy gukh.s3d oldfiles
copy gunthak_chr.txt oldfiles
copy pofire_chr.s3d oldfiles
copy postorms.s3d oldfiles
copy powater_chr.s3d oldfiles
copy qvic.emt oldfiles
copy qvic.s3d oldfiles
copy qvic_chr.txt oldfiles
copy qvic_obj.s3d oldfiles
|
|
|
|
05-07-2011, 07:21 AM
|
|
Developer
|
|
Join Date: Aug 2006
Location: USA
Posts: 5,946
|
|
If this isn't your own server, then you may need to take this issue up with the people who run the server you are trying to play on. Zone points depend on which client version you are running, which version of those zones you are in and going to, and whether or not the dev(s) of the server used the client version bitmask field for the zone point properly.
|
05-07-2011, 07:48 AM
|
Hill Giant
|
|
Join Date: May 2008
Location: sydney
Posts: 177
|
|
I found it happened on two different servers? I would love to test it on my own but i cannot get it working, details posted elsewhere.
Client: Underfoot
using nektulosa.eqg and i can see nektulos_obj1.eqg if that's relevant?
I can see commonlands.eqg and oldcommons.eqg but nothing for ecommons* ... despite the fact I am in the east commonlands and can zone into west commonlands, freeport etc.
If you feel this is a server specific problem i'll take it up with their admins but it has the feel of a client side problem. I might log in to EZserver and give it a go, i should be able to survive the run and i haven't tried that one.
Thanks for your help!
By the way, would the batch file i created be useful to others or do the files need to be carefully examine for file size etc?? It's a shame it's not possible to create a bundle of the missing files, but i'm guessing that's a legal issue.
|
05-07-2011, 09:14 AM
|
Dragon
|
|
Join Date: May 2010
Posts: 966
|
|
You cannot currently zone into or out of the new Nektulos on PEQ with the UF client. You can however port into it, but you would not be able to zone out again.
There is not problem with files your files.
Any server using the PEQ DB unmodified will thus also not be able to zone into the new Nektulos. The client version mask thing for the zone points SHOULD be working for UF but it isn't. It does work with SoD.
Your other issues like the stones in PoK are not necessarily OLD files you may need a source newer than SoF for them never tested with SoF files as I avoided that client.
|
05-07-2011, 09:39 AM
|
Dragon
|
|
Join Date: May 2010
Posts: 966
|
|
My test server also has the same problem as PEQ and I have your solution in my database, so not the same issue unfortunately.
|
05-07-2011, 09:58 AM
|
|
Demi-God
|
|
Join Date: Nov 2007
Posts: 2,175
|
|
I just ported from East Commonlands to Nektulos and back with no issues, this was porting to the new Nektulos. I am using UF client. I know it can be done, because it is working on mine. I fought with this a while, making map files, small changes here and there. There were also missing files I had to pull over from Titanium.
|
05-07-2011, 10:05 AM
|
Dragon
|
|
Join Date: May 2010
Posts: 966
|
|
porting works fine, it is zoning normally that fails.
Port in and try to zone to LS, EC, or Neriak = fail
|
05-07-2011, 10:07 AM
|
|
Demi-God
|
|
Join Date: Nov 2007
Posts: 2,175
|
|
Well that is what I meant, not porting but zoning. I physically ran from east commons to nektulos, then neriak to nektulos (v3) or whatever revision the new one is.
|
05-07-2011, 10:19 AM
|
Dragon
|
|
Join Date: May 2010
Posts: 966
|
|
Still broke on PEQ, I just logged in a toon and ran from PoK to Nektulos and I ran all the way to the end of the passage instead of getting zoned to Nektulos.
|
05-07-2011, 10:26 AM
|
|
Demi-God
|
|
Join Date: Nov 2007
Posts: 2,175
|
|
What is the end goal ? Are you wanting to play on your own server and have it work, or are you wanting to play on PEQ and it work ?
|
05-07-2011, 10:39 AM
|
Dragon
|
|
Join Date: May 2010
Posts: 966
|
|
I play on PEQ. I only tinker with my server to test things to submit for fixes. I'm admittedly not very good with C++ or the quest syntax yet, but I'm working on it.
|
05-07-2011, 10:48 AM
|
|
Demi-God
|
|
Join Date: Nov 2007
Posts: 2,175
|
|
Well you may would want to ask some of the other players on general chat then, in-game. Ask if anyone else is having zoning problems between those zones and what client they are using. You may just be missing your emitter files or something else. The UF client was missing files from the get go.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 09:29 AM.
|
|
|
|
|
|
|
|
|
|
|
|
|