Endurance forumla...

It seems to still be off by a small margin.

My berserker on PEQ has 5253 / 5793 constantly if it's "full"...

Feel free to look at his gear with the peq magelo if that helps.

Hmm, maybe the calcs aren't off. But it's acting very weird when i try to regen past that point... it acts like it can't. I just check again and am at 5753/5793 and holding.

Is endurance regen working properly?

Hmm, is it 5253/5793 or 5753/5793? You mentioned it one way in the first post and another way in the second.

If it is 5753/5793, then it is probably about as good as it is going to get for right now at least. I would prefer it to be 40 over to being 40 under, because at least then people can show 100% on their screen instead of dwindling on 99% or whatever. I don't know if PEQ allows it, but if so, you might want to check the #mystats command to see what the server thinks you have.

If it is 5253/5793, then something must be off still. You didn't mention your char name or link the magelo, so not sure if gear may be related.

Either way, the HP/Mana/Endurance formulas are certainly not 100% perfect and may never be completely perfect. HP is closer than Mana/End, because it is a less complex formula. If Mana/End are still off by a fair amount, I will definitely take another look into what needs further adjustment until they are acceptable. I wish I could have gotten them perfect, but there is some part that I just can't get to work for every level/stat combo perfectly.

Hi Trev, I saw the posting on projecteq about the ht/loh AA. I did found the sk AA listing and what rank and cost for harm touch. http://www.evilgamer.net/forums/showthread.php?t=5784 There is a link Spreadsheet with level and ranks and it shows what level for harm touch on there. Hope this helps.

Thanks, I will make note of what that had:

Looks like we will probably have to add special code or table fields to support how these AAs are actually given out. Until then, I think how it is setup now should at least do to get them the basic skills.

Ok im getting a casting/attack bug where I cannot cast any spells so it is currently unplayable atm for me which is quite annoying.

Any spell I try to cast I get a message saying " this spell cannot be cast while out of combat "

Doing this on my warrior clickies as well as druid, shaman, grp buffs as well as any other normal buff/spell

Not sure if theres a fix for this yet but thought I would note it more descriptively for the attack/cast bug

That means the spell file you are using does not match the spell file the server is using. You will probably need to download a custom spell file for the server you are playing on.

Hmm that's what I originally thought. Im on EZ Server and have tried both the SoF and Titanium files and have had no luck, however I have heard that no one has had problems with the custom spell files.

I tried a fresh install this time and am backing up original spell file and im going to try it again.

Also, make sure that when you change your spell file, that you completely exit all EQ windows currently open and restart EQ for the change to take effect.

Just a minor bug/nonfunctional feature. The item stats window that pulls up when you right click, the "modified" and "unmodified" button switches as it should, but the stat readout remains the same instead of toggling.

Technically, that isn't really a bug, or at least not the kind of bug this thread is for. This thread is here for bugs for things in SoD (or even SoF) that work properly in Titanium, but not in SoD/SoF. In this case, the modified button is a new feature that didn't exist in Titanium, so it isn't really a bug. I would consider that a new feature and as with many of the new features in the new clients, they just haven't been coded/added yet and are not a high priority. If something works right in Titanium, but not in SoD/SoF, that is the type of thing I am looking for reports on here.

If something is buggy in Titanium and also in SoD/SoF, that is also not something that should be reported in this thread. That would just be a general EQEmu bug that effects all clients.

I do appreciate the reports, though. If there is something you are unsure of, always feel free to post it and we can tell you if it belongs in this thread or not. I definitely don't want to scare people off from reporting bugs. You will never be flamed for posting something incorrectly here.

if this wasn't reported before, our players reporting that under SoD cleric and enchanter pets are controllable for some reason

SoD skill and AA ability bugs
 

I just started using the SoD client and noticed a couple things.

When I try to train a Vetren AA, the skill disappears and does not show up on the AA page anymore after its been trained, so I can not make a hotkey.

]
The other thing is, on my ranger the tracking skill and the bow skills seem to be broken, tracking does not lvl up nor does it even locate a mob that is right in front of me, even the mobs that I am attacking. The bow skill, I can ping arrows at a target and it will not lvl up past what I have trained at the gm which is still at lvl 10 or so.

Forage is appears to be not lvling up either .. I am getting foraged items but the skill is at 50/75.

If I find anymore I will be sure to post thanks for all the hard work you guys do for us.
P.S. I forgot to mention my friend who is using the titanium client has none of these issues on his ranger.

What server are you having those issues on, sweaty_palms? None of those are issues I have seen on any recent SVN releases. Maybe you are playing on a server that is behind in code quite a bit.

SoD skill and AA ability bugs
 

Irreverent solo server

also a new bug ... I cannot click off buffs.

And Thanks again


Also I cannot log into some servers that say they support SoD, but as long as I can get into peq when it comes back up it wont matter much. IF none of these bugs are on peq then they wont matter much to me either when it comes up again.

There have been two versions of SoD on Steam. If you look in your EQ folder, in the logs\dbg.txt file, on the first line:

If it says:
Then this is the first version that was available and works very well.

If it says:
Then this is an updated version, that is sometimes referred to as the 'Underfoot' client. Servers that haven't updated their code in a couple of months may not support this version. The code support is not so good for this version and may be the cause of the bugs you are seeing.

People who downloaded the 'original' version of SoD from Steam and who didn't copy the game elsewhere, or disable Steam from automatically updating it will also have been upgraded to the 'Underfoot' version.

SoD bugs
 

Alright thanks for the info .. I am going to check the version and if need be re-download it tonight, after i play some : D

Once again thanks for the info.