Several posts up...


Routers do packet routing. they may even sub in there own mac address when connecting networks. In technical terms they parse iso layer 3 information.

Switchs track/remember down which port a MAC address is located so as to cut down on traffic going out the wrong port. In technical terms they maintain a iso layer 2 information table.

Hubs act as multiport repeaters. Whatever comes in on any port is amplified and sent down all other ports. Very noise on a network. In technical terms this and a repeater are iso layer 1 devices.

Repeaters (almost never used anymore) amplify the signal coming in one port and send it out the other. (note it has only two ports.)

Connection to server failed.
 

I have Windows XP, i'm running a linksys router with the pc's behind it. I get this error when I start the boot5zones.bat.

WorldServer connect: Connecting to the server failed. Error: 10061
InitWorldServer failed

I changed my lan ip(192.168.1.7) to 127.0.0.1 in every spot that was suggested earlier. Trying to do it lan cause my friend and my brother can't play if I host it on the net. Any help would be appriciated. Oh and ports 5999, 7990-7995 are open.

sorry
 

i would help but i dont know how myine is doen what is is... it dusnt give me an error for 5zones but it gives me the stuped Please tell Micrsoft about this problum error reporting even thow thow the windos ran fine and then when its done reporting error it closes the 5zones windows :(


for the post above it sounds like you posted that right outove the Cisco cerikulum lol i dont have my CCNA yet but almost! i like the way you can change encapulation types for routers... i also IGRP is nice but RIP is used much more.... good luck with the server i know ill need it u might to

multi user login?
 

is there a multi user login for lan use?

lan help please :)
 

What goes wrong when you get this message in world.exe?

Unknown opcode: 0x6912 size:132
0: 78 5E 4B 2D 4C CD 2D 65 - 48 05 93 20 70 F9 F8 9F | x^K-L.-eH.. p...
16: 72 67 06 86 03 60 0E 0E - 10 F1 57 88 41 81 41 89 | rg...`....W.A.A.
32: E1 82 A2 32 43 04 43 48 - 8D 72 E8 CF 72 99 DF 42 | ...2C.CH.r..r..B
48: 60 D5 B1 6B FC 6B BE FC - 12 62 58 F0 03 C2 67 78 | `..k.k...bX...gx
64: F3 B7 9E 09 CC 50 66 70 - 05 D3 5C 0C 1E 32 3F CB | .....Pfp..\..2?.
80: 15 80 2C 46 A8 F9 20 3B - 45 80 FA 41 F6 7A 5D F8 | ..,F.. ;E..A.z].
96: 01 B6 7F 0A 90 CF BB C7 - AF 06 A4 0E 24 DF 73 C5 | ............$.s.
112: BF 06 24 9E 00 B4 1B 84 - 23 FE 42 34 1F 07 62 00 | ..$.....#.B4..b.
128: FB BF 30 D6 | ..0.
Client disconnected

lol forgot something about my post
 

i forgot to mention thats what i get when i try to log my character in.

thats my latest problem
 

yeah I have the same problem with the unknown opcode: 0x6912 size 132

anyone help?

Please use the support forums to get support - you won't find much support here.

You will also need to provide more information about what you are doing, what steps you have taken, *why* you decided to take the steps you did, and what you are trying to accomplish. Explaining the why you are doing what you are doing is important, as that prompts us to update old information.