aaaaaaaaah
 

aaaaah, then .... in the public port hole is where I put (7100-7500) ???

nice
 

ok friend, I could open the range of ports, and put in, 7100 to 7500, and open the two in udp and tcp, right?

:d
 

I already made a friend, I let you open the ports with the range of ports, 7100 to 7500 in udp and tcp, try to see if you can enter the server?

Your port 9000 is not open now. It was before.

WorldAuthenticate. Error connecting to 2.155.129.145:9000

Now is the 9000? but if the 9000 I have it open here he told me yesterday and now he does not

Here is the ports you need to make sure are open (in BOTH router and windows firewall)

5998 TCP and UDP
5999 TCP and UDP
7100 to 7500 TCP and UDP
7778 TCP and UDP
9000 TCP and UDP

If those ports are open like that and you're using the configs I showed you, then there shouldn't be any problems.

but....
 

but yesterday the 9000 was open to me, I saw it at https://canyouseeme.org/ and now it tells me that I do not ... I have the server running, and the 9000 is open on the firewall and on the router like yesterday, but now he does not recognize me as open, I do not understand

Until the connection problem is solved, SHUT THE FIREWALL OFF and if you have any antivirus programs, disable them (just for now). One step at a time until the connection problem is solved.
Double check your router to make sure the ports are setup properly. If they are, do not change them. The problem may be something else.

friend, port 9000 is already open, I think there is nothing left ... try now to access the server, if it does not go now I cut my veins

https://canyouseeme.org/ says that I succeed in green now

Ok, it's all working now, good to go. Have fun with your server :)