EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   General::General Discussion (https://www.eqemulator.org/forums/forumdisplay.php?f=586)
-   -   sweetFX - make eq look uber (https://www.eqemulator.org/forums/showthread.php?t=38349)

Davood 06-01-2014 02:23 PM
sweetFX - make eq look uber
 
Hello Everyone,

I started tinkering with modding eq and stumbled upon something very tasty.

It is called "sweetFX" - what it does is it injects some post-processing to your graphics card for DX 9, 10 and 11.

In laymans terms you can do the following with it (also depends on the game implementation too).
Add film grain effect
Cartoonize the graphics
HDR
bloom
FSAA
MSAA
digital vibrance
etc


Installing it is just a matter of copying the files with the right directory structure into the root of your EQ dir.

I didn't find anything about it on this site (I did some half-assed searches).

I have been experimenting with the settings - I would love it if we could collaborate and find the "best" settings for eq. On the presets site (linked below) there are no Everquest Presets uploaded (yet). There are some for everquest2 (didn't like them) and many many others for many other games.

If someone could do me the favour and show some of the before/after screenshots of what sweetFX can do we can get some serious interest in determining the best presets for eq.

I have only tested this with the underfoot client so far - but i would wager that some of the older, and all of the newer clients would play nice with it.

Now for the links:

SweetFX
http://www.guru3d.com/files_details/..._download.html


Some presets
http://sfx.thelazy.net/games/

Davood 06-01-2014 02:29 PM
also examples of sweetFX in use for other games

https://www.flickr.com/search/?q=SweetFX

Davood 06-01-2014 11:09 PM
These are the settings im using

Code:
  /*-----------------------------------------------------------. 
  /                      Description                          /
  '------------------------------------------------------------/

  /*-----------------------------------------------------------.
  /                      Choose effects                        /
  '-----------------------------------------------------------*/

// Set to 1 for ON or 0 for OFF
#define USE_SMAA_ANTIALIASING 0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using the SMAA technique.
#define USE_FXAA_ANTIALIASING 1 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using the FXAA technique
#define USE_EXPLOSION    0 //[0 or 1] Explosion : Scatters the pixels, making the image look fuzzy.
#define USE_CARTOON          0 //[0 or 1] Cartoon : "Toon"s the image.(Interferes with SMAA, CRT, Bloom, HDR and Lumasharpen)
#define USE_ADVANCED_CRT      0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display. Set gaussian blur along with it to get a halation effect
#define USE_BLOOM            1 //[0 or 1] Bloom : Makes bright lights bleed their light into their surroundings (relatively high performance cost)
#define USE_HDR              1 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR look (relatively high performance cost)
#define USE_LUMASHARPEN      0 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges which makes them less smooth - I'm working on fixing that.
#define USE_GAUSSIAN          1 //[0 or 1] Gaussian Blur : can be used to... blur, but also bloom/hazy/glowy look, also unsharp masking
#define USE_FILMGRAIN        0 //[0 or 1] Filmgrain effect
#define USE_TECHNICOLOR      0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old movie using the Technicolor three-strip color process (Techicolor Process 4)
#define USE_DPX              0 //[0 or 1] Cineon DPX : Should make the image look like it's been converted to DXP Cineon - basically it's another movie-like look similar to technicolor.
#define USE_MONOCHROME        0 //[0 or 1] Monochrome : Monochrome makes the colors disappear.
#define USE_LIFTGAMMAGAIN    0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of shadows, midtones and highlights (avoids clipping)
#define USE_TONEMAP          0 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach and defog. (may cause clipping)
#define USE_VIBRANCE          1 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define USE_CURVES            1 //[0 or 1] Curves : Contrast adjustments using S-curves.
#define USE_SEPIA            0 //[0 or 1] Sepia : Sepia tones the image.
#define USE_VIGNETTE          0 //[0 or 1] Vignette : Darkens the edges of the image to make it look more like it was shot with a camera lens. May cause banding artifacts.
#define USE_DITHER            0 //[0 or 1] Dither : Applies dithering to simulate more colors than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
#define USE_BORDER            0 //[0 or 1] Border : Makes the screenedge black as a workaround for the bright edge that forcing some AA modes sometimes causes.
#define USE_SPLITSCREEN      0 //[0 or 1] Splitscreen : Enables the before-and-after splitscreen comparison mode.

  /*-----------------------------------------------------------.
  /                  Film grain settings                        /
  '-----------------------------------------------------------*/
#define FilmGrainIntensity 0.35  //[0.00 to 1.00] Intensity of grain. Default is 0.46
#define FilmGrainExposure 23    //[0 to 100]    Grain Exposure. Default is 40 (Lower -> darker noise)
#define FilmGrainSize 5.2          //[0 to 10]      Size of the grain. Default is 2 (Higher -> thinner noise)


  /*-----------------------------------------------------------.
  /                  SMAA Anti-aliasing settings                /
  '-----------------------------------------------------------*/

#define SMAA_THRESHOLD 0.12          //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and 0.12.
#define SMAA_MAX_SEARCH_STEPS 98      //[0 to 98] Determines the radius SMAA will search for aliased edges
#define SMAA_MAX_SEARCH_STEPS_DIAG 16  //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges
#define SMAA_CORNER_ROUNDING 100      //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the default.

// -- Advanced SMAA settings --
#define COLOR_EDGE_DETECTION 1        //[0 or 1] 1 Enables color edge detection (slower but slightly more acurate) - 0 uses luma edge detection (faster)
#define SMAA_DIRECTX9_LINEAR_BLEND 0  //[0 or 1] Using DX9 HARDWARE? (software version doesn't matter) if so this needs to be 1 - If not, leave it at 0.
                                      //Enable this only if you use a Geforce 7xxx series or older card, or a Radeon X1xxx series or older card.


  /*-----------------------------------------------------------.
  /                  FXAA Anti-aliasing settings                /
  '-----------------------------------------------------------*/
#define FXAA_QUALITY__PRESET 39      //[1 to 39] Choose the quality preset. 39 is the highest quality.
#define fxaa_Subpix 1.000            //[0.000 to 1.000] Choose the amount of sub-pixel aliasing removal.
#define fxaa_EdgeThreshold 0.400    //[0.000 to 1.000] Edge detection threshold. The minimum amount of local contrast required to apply algorithm.
#define fxaa_EdgeThresholdMin 0.030  //[0.000 to 1.000] Darkness threshold. Trims the algorithm from processing darks.

  /*-----------------------------------------------------------.
  /                    Explosion settings                      /
  '-----------------------------------------------------------*/
#define Explosion_Radius    0.5    //[0.2 to 100.0] Amount of effect you want.

  /*-----------------------------------------------------------.
  /                  Cartoon settings                          /
  '-----------------------------------------------------------*/
#define CartoonPower 4.0            //[0.1 to 10.0] Amount of effect you want.
#define CartoonEdgeSlope    1.5    //[0.1 to 8.0] Raise this to filter out fainter edges. You might need to increase the power to compensate. Whole numbers are faster.

  /*-----------------------------------------------------------.
  /                  Advanced CRT settings                    /
  '----------------------------------------------------------*/
#define CRTAmount            1.00    //[0.00 to 1.00]  Amount of CRT effect you want

#define CRTResolutionX      512    //[1 to 2048]    Original input width of the game (ie. 320)
#define CRTResolutionY      304    //[1 to 2048]    Original input height of the game (ie. 240)
#define CRTgamma            2.4    //[0.0 to 4.0]    Gamma of simulated CRT (default 2.4)
#define CRTmonitorgamma      2.2    //[0.0 to 4.0]    Gamma of display monitor (typically 2.2 is correct)
#define CRTBrightness        0.9    //[1.0 to 3.0]    Used to boost brightness a little. Default is 1.0
#define CRTScanlineIntensity 2.0    //[2.0 to 4.0]    Scanlines intensity (use integer values preferably). Default is 2.0
#define CRTScanlineGaussian  1      //[0 or 1]        Use the "new nongaussian scanlines bloom effect". Default is on

#define CRTCurvature        1      //[[0 or 1]          "Barrel effect" enabled (1) or off (0)
#define CRTCurvatureRadius  1.5    //[0.0 to 2.0]      Curvature Radius (only effective when Curvature is enabled). Default is 1.5
#define CRTCornerSize        0.0100  //[0.0000 to 0.0020] Higher values, more rounded corner. Default is 0.001
#define CRTDistance          2.00    //[0.00 to 4.00]    Simulated distance from viewer to monitor. Default is 2.00
#define CRTAngleX            0.00    //[-0.20 to 0.20]    Tilt angle in radians (X coordinates)
#define CRTAngleY            -0.15  //[-0.20 to 0.20]    Tilt angle in radians (Y coordinates). (Value of -0.15 gives the 'arcade tilt' look)
#define CRTOverScan          1.01    //[1.00 to 1.10]    Overscan (e.g. 1.02 for 2% overscan). Default is 1.01
#define CRTOversample        0      //[0 or 1]          Enable 3x oversampling of the beam profile (warning : performance hit)


  /*-----------------------------------------------------------.
  /                  Bloom settings                            /
  '-----------------------------------------------------------*/
#define BloomThreshold 16 //[0.00 to 50.00] Threshold for what is a bright light (that causes bloom) and what isn't.
#define BloomPower 1.446    //[0.000 to 8.000] Strength of the bloom
#define BloomWidth 0.0142    //[0.0000 to 1.0000] Width of the bloom


  /*-----------------------------------------------------------.
  /                  HDR settings                              /
  '-----------------------------------------------------------*/
#define HDRPower 0.98 //[0.00 to 8.00] Strangely lowering this makes the image brighter
#define radius2  0.87  //[0.00 to 8.00] Raising this seems to make the effect stronger and also brighter


  /*-----------------------------------------------------------.
  /                  LumaSharpen settings                      /
  '-----------------------------------------------------------*/
// -- Sharpening --
#define sharp_strength 3.00  //[0.10 to 3.00] Strength of the sharpening
#define sharp_clamp    0.546  //[0.000 to 1.000] Limits maximum amount of sharpening a pixel recieves - Default is 0.035

// -- Advanced sharpening settings --
#define pattern 4        //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 = Wider, 4 = Pyramid shaped.
#define offset_bias 0.2  //[0.0 to 6.0] Offset bias adjusts the radius of the sampling pattern.
                        //I designed the pattern for offset_bias 1.0, but feel free to experiment.
                         
// -- Debug sharpening settings --
#define show_sharpen 0  //[0 or 1] Visualize the strength of the sharpen (multiplied by 4 to see it better)


  /*-----------------------------------------------------------.
  /                  Gaussian Blur settings                    /
  '-----------------------------------------------------------*/
#define GaussEffect 2        //[0|1|2|3]        0 = Blur, 1 = Unsharpmask (expensive), 2 = Bloom, 3 = Sketchy. Default is 2
#define GaussQuality 1      //[0|1|2|3]        Warning: 2 and 3 are expensive. Default is 1
#define GaussSigma 2        //[1 to 4]        The higher the wider blur/bloom is (only effective when Bloom selected)
#define GaussBloomWarmth 0  //[0|1|2]          "Temperature" of the bloom - 0 = neutral, 1 = warm, 2 = hazy/foggy
#define GaussThreshold 0.50  //[0.00 to 1.00]  [DX10/11 only] Threshold for what is a bright light (that causes bloom) and what isn't.
#define GaussExposure 030.0  //[0.00 to 100.00] [DX10/11 only] Exposure of the effect (the lower the brighter)
#define GaussStrength 0.37  //[0.00 to 1.00]  Amount of effect blended into the final image


  /*-----------------------------------------------------------.
  /                  TECHNICOLOR settings                      /
  '-----------------------------------------------------------*/
#define TechniAmount 0.1        //[0.00 to 1.00]
#define TechniPower  6.0        //[0.00 to 8.00]
#define redNegativeAmount  0.88 //[0.00 to 1.00]
#define greenNegativeAmount 0.88 //[0.00 to 1.00]
#define blueNegativeAmount  0.88 //[0.00 to 1.00]


  /*-----------------------------------------------------------.
  /                  Cineon DPX settings                        /
  '-----------------------------------------------------------*/
#define Red  1.0  //[1.0 to 15.0]
#define Green 1.0  //[1.0 to 15.0]
#define Blue  1.0  //[1.0 to 15.0]

#define ColorGamma    1.5  //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner similar to Vibrance. 1.0 is neutral.
#define DPXSaturation 1.5  //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.

#define RedC  0.33  //[0.60 to 0.20]
#define GreenC 0.36  //[0.60 to 0.20]
#define BlueC  0.35  //[0.60 to 0.20]

#define Blend 0.10    //[0.00 to 1.00] How strong the effect should be


  /*-----------------------------------------------------------.
  /                  Monochrome settings                        /
  '-----------------------------------------------------------*/
#define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of RGB to include (should sum up to 1.00)


  /*-----------------------------------------------------------.
  /                  Lift Gamma Gain settings                  /
  '-----------------------------------------------------------*/
#define RGB_Lift  float3(1.00, 1.01, 1.00)  //[0.000 to 2.000] Adjust shadows for Red, Green and Blue
#define RGB_Gamma float3(1.00, 1.22, 1.03)  //[0.000 to 2.000] Adjust midtones for Red, Green and Blue
#define RGB_Gain  float3(1.00, 1.32, 1.23)  //[0.000 to 2.000] Adjust highlights for Red, Green and Blue


  /*-----------------------------------------------------------.
  /                  Tonemap settings                          /
  '-----------------------------------------------------------*/
#define Gamma 1.0                      //[0.000 to 2.000] Adjust midtones
#define Exposure 0.0                    //[-1.000 to 1.000] Adjust exposure
#define Saturation 0.000                  //[-1.000 to 1.000] Adjust saturation
#define Bleach 0.00                      //[0.000 to 1.000] Brightens the shadows and fades the colors
#define Defog 0.030                      //[0.000 to 1.000] How much of the color tint to remove
#define FogColor float3(2.55, 2.55, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to remove - default is blue


  /*-----------------------------------------------------------.
  /                  Vibrance settings                          /
  '-----------------------------------------------------------*/
#define Vibrance 1.00 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you use negative values) the pixels depending on their original saturation.
#define Vibrance_RGB_balance float3(1.00, 1.00, 1.00) //[-10.00 to 10.00,-10.00 to 10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give more boost to certain colors over others

  /*-----------------------------------------------------------.
  /                  Curves settings                            /
  '-----------------------------------------------------------*/
#define Curves_mode 0        //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
#define Curves_contrast 0.55 //[-1.00 to 1.00] The amount of contrast you want

// -- Advanced curve settings --
#define Curves_formula 3    //[1|2|3|4|5|6|7|8|9] The contrast s-curve you want to use.
                            //1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 = Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
                            //7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola.
                            //Note that Technicolor Cinestyle is practically identical to Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
                            //I prefer 2 myself, but 3 is a nice alternative with a little more effect (but harsher on the highlight and shadows) and it's the fastest formula.


  /*-----------------------------------------------------------.
  /                  Sepia settings                            /
  '-----------------------------------------------------------*/
#define ColorTone float3(1.90, 1.50, 1.20) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What color to tint the image
#define GreyPower  0.11                    //[0.00 to 1.00] How much desaturate the image before tinting it
#define SepiaPower 0.90                    //[0.00 to 1.00] How much to tint the image


  /*-----------------------------------------------------------.
  /                  Vignette settings                          /
  '-----------------------------------------------------------*/
#define VignetteRatio 30.00    //[0.15 to 6.00]  Sets a width to height ratio. 1.00 (1/1) is perfectly round, while 1.60 (16/10) is 60 % wider than it's high.
#define VignetteRadius 12.68  //[-1.00 to 3.00] lower values = stronger radial effect from center
#define VignetteAmount -2.00  //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 = Max White.
#define VignetteSlope 28      //[1 to 16] How far away from the center the change should start to really grow strong (odd numbers cause a larger fps drop than even numbers)
#define VignetteCenter float2(0.500, 0.500)  //[0.000 to 1.000, 0.000 to 1.000] Center of effect.


  /*-----------------------------------------------------------.
  /                  Dither settings                            /
  '-----------------------------------------------------------*/
#define dither_method 2  //[1 or 2] 1 = Ordering dithering (good and very fast), 2 = Random dithering (even better dithering but not as fast)

//Note that the patterns used by Dither, makes an image harder to compress.
//This can make your screenshots and video recordings take up more space.


  /*-----------------------------------------------------------.
  /                  Border settings                            /
  '-----------------------------------------------------------*/
#define border_width float2(0,0)    //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels.
#define border_color float3(0, 0, 0)  //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white.

  /*-----------------------------------------------------------.
  /                  Splitscreen settings                      /
  '-----------------------------------------------------------*/
#define splitscreen_mode 1  //[1|2|3|4|5]  1 = Vertical 50/50 split, 2 = Vertical 25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal 25/50/25 split


  /*-----------------------------------------------------------.
  /                  Key settings                              /
  '-----------------------------------------------------------*/
// This is the section where you can define your own key mapping
// See the following URL to find out what keycode a key has:
// http://www.cambiaresearch.com/articles/15/javascript-char-codes-key-codes

// key_toggle_sweetfx = 145
// key_screenshot    = 44 ; 44 = PrtSrc
// key_reload_sweetfx = 19


  /*-----------------------------------------------------------.
  /                  Misc settings                              /
  '-----------------------------------------------------------*/
// You can load and chain other DirectX wrappers (ENB, Helix, Windower...)
// If the external wrapper is already named d3d9.dll, rename it into
// something else like "d3d9_enb.dll" (note that even if this is commented it actually works)

// external_d3d9_wrapper = none
// external_dxgi_wrapper = none

Akkadius 06-01-2014 11:10 PM
What a smoke show. Show some screenshots!

knowom 06-02-2014 12:05 AM
Unrelated to SweetFX, but worth mentioning some it ties in with image quality graphic enhancement stuff in general I like Rivatuner. In particular it's LODbiasRange under power user setting [Nvidia\ATI]\global set to 15 which allows you to increase Mipmap LOD bias adjustment range +/- 15 rather than 3 by default within RivaTuner it's normal setting itself is 0, but I set it to +15 to make textures appear extra sharp -15 would do the opposite making them blurry and more retro low resolution. Rivatuner is no longer updated which means only manually added new driver support, but you can use RivaTuner\System ForceDriverVersion to update driver versions. My driver version is 295.73 so it became ForceDriverVersion "29573" you drop the decimal point.

vsab 06-02-2014 08:21 AM
Oh dear, I could waste some hours with this....

Davood 06-02-2014 03:42 PM
OK so like i want to put some images inline.. how do i do it?

Davood 06-02-2014 03:54 PM
SweetFX ON (with the settings I listed above)
http://i.imgur.com/PXI5pG6.jpg

SweetFX off
http://i.imgur.com/iy29HUF.jpg


i'd really like it if someone can figure out how to make film grain display properly i have it disabled in my settings atm

Davood 06-02-2014 04:38 PM
if someone can get

http://enbdev.com/download.htm

working with sweetFX in EQ1 i will forever be grateful. I have them both working in skyrim and it is just W O N D E R F U L

enb takes care of fancy lighting and it is just pure magic

vsab 06-03-2014 01:55 AM
Played around with this for a while and didn't find anything that really made it look any better. Kinda like polishing a turd. Also, it seems to interfere with WinEQ.

Davood 06-05-2014 01:08 PM
well EQ is kind of shitty in terms of its graphics but you can still make it nicer

if anyone out there has scatological tendencies, maybe they can provide some input as to the best way to "truss up" the turd that is the eq graphics engine.

knowom 06-05-2014 05:26 PM
EQ's graphics engine can look fairly good despite it's age with higher resolution textures. It just looks more dated and lower resolution primarily. It has it's other qwerks like being lower poly and some issues with geometry where some of it should have been rotated 90 degree's where it got textured wrongly.

knowom 08-01-2015 02:01 AM
I need to look into this more has more potential than I realized initially. I read up a little on SweetFX while kind of researching on the subject about scaling filters particularly xBRZ/HQX are amazing. Anyway I didn't realize SweetFX had a unsharp mask option that's big for me since I like negative LOD bias tweak a lot which is similar I my graphic quality a bit on the sharp side for better texture image quality clarity so that certainly holds potential for me.

On the subject of scaling filters I came across this link as well it seems like you may be able to inject a HQX filter with ReShade SweetFX which has the potential to look quite neat. I defiantly need to play around with some of this stuff. Lots of cool stuff to tweak and explore.
http://reshade.me/forum/shader-sugge...s?limitstart=0

knowom 08-01-2015 09:07 AM
SweetFX_config.exe doesn't seem to work it asks you to start EverQuest.exe when you set eqgame.exe, but put put the SweetFX files into the EQ directory and they work and you can configure them manually by with SweetFX_settings.txt

My current settings thus far are the following, but note I've only enabled & adjust settings for
#define USE_CARTOON 1 [toons image makes it look a bit cartoon like I set it conservative more messes w/text]
#define USE_LUMASHARPEN 1 [sharpens image I manually tweaked this til I had what felt it was best image quality]
#define USE_VIBRANCE 1 [used to over or under saturate colors to make them dull or in your face]

and I enabled, but didn't adjust either of these two settings
#define USE_DITHER 1 [has two configuration options, but was all ready set for better option by default]
#define USE_SPLITSCREEN 1 [to visualize the tweak adjustment split screen representation]

Split screen is just for demonstration disable it if you like the look obviously. I'll probably experiment with it more another time with a few of other settings I didn't get around to testing out. I'm still really curious about the ReShade and scaling filters.


Quote:
/*-----------------------------------------------------------.
/ Description /
'------------------------------------------------------------/

Game:
Author:
SweetFX version: 1.5.1
Description:

Please note when tweaking settings that higher numbers does not always equal better (nor

does lower).
Finding the best settings for your game and your taste is about finding just the right

amount to apply.

If you made a good setttings preset please share it with your friends, on forums and

websites,
and/or submit it to the SweetFX Settings Database : http://sfx.thelazy.net/games/

This description field and the above Game and Author fields are here so you can fill in your

own details for the presets you create.
Just delete this description and fill in your own and then share it with the world.

Hope you enjoy my mod.
- CeeJay.dk

/*-----------------------------------------------------------.
/ Choose effects /
'-----------------------------------------------------------*/

// Set to 1 for ON or 0 for OFF
#define USE_SMAA_ANTIALIASING 0 //[0 or 1] SMAA Anti-aliasing : Smoothens jagged lines using

the SMAA technique.
#define USE_FXAA_ANTIALIASING 0 //[0 or 1] FXAA Anti-aliasing : Smoothens jagged lines using

the FXAA technique. WIP - Currently only works in DX9 and you need to use the FXAA injector

dlls.
#define USE_EXPLOSION 0 //[0 or 1] Explosion : Scatters the pixels, making the image

look fuzzy.
#define USE_CARTOON 1 //[0 or 1] Cartoon : "Toon"s the image. (Interferes with SMAA,

CRT, Bloom, HDR and Lumasharpen)
#define USE_ADVANCED_CRT 0 //[0 or 1] Advanced CRT : Simulates an old CRT TV display.

(Interferes with SMAA, Cartoon, Bloom, HDR and Lumasharpen, and it has a very high

performance cost)
#define USE_BLOOM 0 //[0 or 1] Bloom : Makes bright lights bleed their light into

their surroundings (relatively high performance cost)
#define USE_HDR 0 //[0 or 1] HDR : Not actual HDR - It just tries to mimic an HDR

look (relatively high performance cost)
#define USE_LUMASHARPEN 1 //[0 or 1] LumaSharpen : Also sharpens the antialiased edges

which makes them less smooth - I'm working on fixing that.
#define USE_LEVELS 0 //[0 or 1] Levels : Sets a new black and white point. This

increases contrast but causes clipping. Use Curves instead if you want to avoid that.
#define USE_TECHNICOLOR 0 //[0 or 1] TECHNICOLOR : Attempts to mimic the look of an old

movie using the Technicolor three-strip color process (Techicolor Process 4)
#define USE_DPX 0 //[0 or 1] Cineon DPX : Should make the image look like it's

been converted to DXP Cineon - basically it's another movie-like look similar to

technicolor.
#define USE_MONOCHROME 0 //[0 or 1] Monochrome : Monochrome makes the colors disappear.
#define USE_LIFTGAMMAGAIN 0 //[0 or 1] Lift Gamma Gain : Adjust brightness and color of

shadows, midtones and highlights
#define USE_TONEMAP 0 //[0 or 1] Tonemap : Adjust gamma, exposure, saturation, bleach

and defog. (may cause clipping)
#define USE_VIBRANCE 0 //[0 or 1] Vibrance : Intelligently saturates (or desaturates if

you use negative values) the pixels depending on their original saturation.
#define USE_CURVES 0 //[0 or 1] Curves : Contrast adjustments using S-curves.
#define USE_SEPIA 0 //[0 or 1] Sepia : Sepia tones the image.
#define USE_VIGNETTE 0 //[0 or 1] Vignette : Darkens the edges of the image to make it

look more like it was shot with a camera lens. May cause banding artifacts.
#define USE_DITHER 1 //[0 or 1] Dither : Applies dithering to simulate more colors

than your monitor can display. This lessens banding artifacts (mostly caused by Vignette)
#define USE_BORDER 0 //[0 or 1] Border : Makes the screenedge black as a workaround

for the bright edge that forcing some AA modes sometimes causes.
#define USE_SPLITSCREEN 1 //[0 or 1] Splitscreen : Enables the before-and-after

splitscreen comparison mode.

#define USE_CUSTOM 0 //[0 or 1] Custom : Write your own shader by editing custom.h,

and then enable it here.

/*-----------------------------------------------------------.
/ SMAA Anti-aliasing settings /
'-----------------------------------------------------------*/

#define SMAA_THRESHOLD 0.10 //[0.05 to 0.20] Edge detection threshold. If SMAA

misses some edges try lowering this slightly. I prefer between 0.08 and 0.12.
#define SMAA_MAX_SEARCH_STEPS 16 //[0 to 98] Determines the radius SMAA will search

for aliased edges
#define SMAA_MAX_SEARCH_STEPS_DIAG 6 //[0 to 16] Determines the radius SMAA will search

for diagonal aliased edges
#define SMAA_CORNER_ROUNDING 0 //[0 to 100] Determines the percent of antialiasing

to apply to corners. 0 seems to affect fine text the least so it's the default.

// -- Advanced SMAA settings --
#define COLOR_EDGE_DETECTION 1 //[0 or 1] 1 Enables color edge detection (slower

but slightly more acurate) - 0 uses luma edge detection (faster)
#define SMAA_DIRECTX9_LINEAR_BLEND 0 //[0 or 1] Using DX9 HARDWARE? (software version

doesn't matter) if so this needs to be 1 - If not, leave it at 0.
//Enable this only if you use a Geforce 7xxx series

or older card, or a Radeon X1xxx series or older card.

/*-----------------------------------------------------------.
/ FXAA Anti-aliasing settings /
'-----------------------------------------------------------*/
#define FXAA_QUALITY__PRESET 9 //[1 to 9] Choose the quality preset. 9 is the

highest quality.
#define fxaa_Subpix 0.400 //[0.000 to 1.000] Choose the amount of sub-pixel

aliasing removal.
#define fxaa_EdgeThreshold 0.250 //[0.000 to 1.000] Edge detection threshold. The

minimum amount of local contrast required to apply algorithm.
#define fxaa_EdgeThresholdMin 0.060 //[0.000 to 1.000] Darkness threshold. Trims the

algorithm from processing darks.

/*-----------------------------------------------------------.
/ Explosion settings /
'-----------------------------------------------------------*/
#define Explosion_Radius 2.5 //[0.2 to 100.0] Amount of effect you want.


/*-----------------------------------------------------------.
/ Cartoon settings /
'-----------------------------------------------------------*/
#define CartoonPower 0.1 //[0.1 to 10.0] Amount of effect you want.
#define CartoonEdgeSlope 0.4 //[0.1 to 8.0] Raise this to filter out fainter edges.

You might need to increase the power to compensate. Whole numbers are faster.


/*----------------------------------------------------------.
/ Advanced CRT settings /
'----------------------------------------------------------*/
#define CRTAmount 1.00 //[0.00 to 1.00] Amount of CRT effect you want

#define CRTResolution 2.0 //[1.0 to 8.0] Input size coefficent (low values

gives the "low-res retro look"). Default is 1.2
#define CRTgamma 2.2 //[0.0 to 4.0] Gamma of simulated CRT (default 2.2)
#define CRTmonitorgamma 2.4 //[0.0 to 4.0] Gamma of display monitor (typically

2.2 is correct)
#define CRTBrightness 1.2 //[1.0 to 3.0] Used to boost brightness a little.

Default is 1.0
#define CRTScanlineIntensity 2.0 //[2.0 to 4.0] Scanlines intensity (use integer

values preferably). Default is 2.0
#define CRTScanlineGaussian 1 //[0 or 1] Use the "new nongaussian scanlines

bloom effect". Default is on

#define CRTCurvature 1 //[[0 or 1] "Barrel effect" enabled (1) or off

(0)
#define CRTCurvatureRadius 2.0 //[0.0 to 2.0] Curvature Radius (only effective

when Curvature is enabled). Default is 1.5
#define CRTCornerSize 0.0100 //[0.0000 to 0.0020] Higher values, more rounded

corner. Default is 0.001
#define CRTDistance 2.00 //[0.00 to 4.00] Simulated distance from viewer to

monitor. Default is 2.00
#define CRTAngleX 0.00 //[-0.20 to 0.20] Tilt angle in radians (X

coordinates)
#define CRTAngleY -0.15 //[-0.20 to 0.20] Tilt angle in radians (Y

coordinates). (Value of -0.15 gives the 'arcade tilt' look)
#define CRTOverScan 1.00 //[1.00 to 1.10] Overscan (e.g. 1.02 for 2%

overscan). Default is 1.01
#define CRTOversample 0 //[0 or 1] Enable 3x oversampling of the beam

profile (warning : performance hit)

/*-----------------------------------------------------------.
/ Bloom settings /
'-----------------------------------------------------------*/
#define BloomThreshold 20.25 //[0.00 to 50.00] Threshold for what is a bright light (that

causes bloom) and what isn't.
#define BloomPower 1.446 //[0.000 to 8.000] Strength of the bloom
#define BloomWidth 0.0142 //[0.0000 to 1.0000] Width of the bloom

/*-----------------------------------------------------------.
/ HDR settings /
'-----------------------------------------------------------*/
#define HDRPower 1.30 //[0.00 to 8.00] Strangely lowering this makes the image brighter
#define radius2 0.87 //[0.00 to 8.00] Raising this seems to make the effect stronger and

also brighter

/*-----------------------------------------------------------.
/ LumaSharpen settings /
'-----------------------------------------------------------*/
// -- Sharpening --
#define sharp_strength 1.0 //[0.10 to 3.00] Strength of the sharpening
#define sharp_clamp 1.0 //[0.000 to 1.000] Limits maximum amount of sharpening a pixel

recieves - Default is 0.035

// -- Advanced sharpening settings --
#define pattern 2 //[1|2|3|4] Choose a sample pattern. 1 = Fast, 2 = Normal, 3 =

Wider, 4 = Pyramid shaped.
#define offset_bias 0.1 //[0.0 to 6.0] Offset bias adjusts the radius of the sampling

pattern.
//I designed the pattern for offset_bias 1.0, but feel free to

experiment.

// -- Debug sharpening settings --
#define show_sharpen 0 //[0 or 1] Visualize the strength of the sharpen (multiplied by 4

to see it better)

/*----------------------------------------------------------.
/ Levels settings /
'----------------------------------------------------------*/

#define Levels_black_point 16 //[0 to 255] The black point is the new black - literally.

Everything darker than this will become completely black. Default is 16.0
#define Levels_white_point 235 //[0 to 255] The new white point. Everything brighter than

this becomes completely white. Default is 235.0

//Colors between the two points will stretched, which increases contrast, but details above

and below the points are lost (this is called clipping).


/*-----------------------------------------------------------.
/ TECHNICOLOR settings /
'-----------------------------------------------------------*/
#define TechniAmount 0.4 //[0.00 to 1.00]
#define TechniPower 4.0 //[0.00 to 8.00]
#define redNegativeAmount 0.88 //[0.00 to 1.00]
#define greenNegativeAmount 0.88 //[0.00 to 1.00]
#define blueNegativeAmount 0.88 //[0.00 to 1.00]


/*-----------------------------------------------------------.
/ Cineon DPX settings /
'-----------------------------------------------------------*/
#define Red 8.0 //[1.0 to 15.0]
#define Green 8.0 //[1.0 to 15.0]
#define Blue 8.0 //[1.0 to 15.0]

#define ColorGamma 2.5 //[0.1 to 2.5] Adjusts the colorfulness of the effect in a manner

similar to Vibrance. 1.0 is neutral.
#define DPXSaturation 3.0 //[0.0 to 8.0] Adjust saturation of the effect. 1.0 is neutral.

#define RedC 0.36 //[0.60 to 0.20]
#define GreenC 0.36 //[0.60 to 0.20]
#define BlueC 0.34 //[0.60 to 0.20]

#define Blend 0.2 //[0.00 to 1.00] How strong the effect should be.


/*-----------------------------------------------------------.
/ Monochrome settings /
'-----------------------------------------------------------*/
#define Monochrome_conversion_values float3(0.18,0.41,0.41) //[0.00 to 1.00] Percentage of

RGB to include (should sum up to 1.00)


/*-----------------------------------------------------------.
/ Lift Gamma Gain settings /
'-----------------------------------------------------------*/
#define RGB_Lift float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust shadows for Red,

Green and Blue.
#define RGB_Gamma float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust midtones for Red,

Green and Blue
#define RGB_Gain float3(1.000, 1.000, 1.000) //[0.000 to 2.000] Adjust highlights for Red,

Green and Blue

//Note that a value of 1.000 is a neutral setting that leave the color unchanged.

/*-----------------------------------------------------------.
/ Tonemap settings /
'-----------------------------------------------------------*/
#define Gamma 1.000 //[0.000 to 2.000] Adjust midtones. 1.000 is neutral. This

setting does exactly the same as the one in Lift Gamma Gain, only with less control.

#define Exposure 0.000 //[-1.000 to 1.000] Adjust exposure

#define Saturation 0.000 //[-1.000 to 1.000] Adjust saturation

#define Bleach 0.000 //[0.000 to 1.000] Brightens the shadows and fades the colors

#define Defog 0.000 //[0.000 to 1.000] How much of the color tint to remove
#define FogColor float3(0.00, 0.00, 2.55) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What

color to remove - default is blue


/*-----------------------------------------------------------.
/ Vibrance settings /
'-----------------------------------------------------------*/
#define Vibrance 0.25 //[-1.00 to 1.00] Intelligently saturates (or desaturates if you

use negative values) the pixels depending on their original saturation.
#define Vibrance_RGB_balance float3(1.00, 1.00, 1.00) //[-10.00 to 10.00,-10.00 to

10.00,-10.00 to 10.00] A per channel multiplier to the Vibrance strength so you can give

more boost to certain colors over others


/*-----------------------------------------------------------.
/ Curves settings /
'-----------------------------------------------------------*/
#define Curves_mode 0 //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 =

Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
#define Curves_contrast 0.15 //[-1.00 to 1.00] The amount of contrast you want

// -- Advanced curve settings --
#define Curves_formula 2 //[1|2|3|4|5|6|7|8|9|10] The contrast s-curve you want to use.
//1 = Sine, 2 = Abs split, 3 = Smoothstep, 4 = Exp formula, 5 =

Simplified Catmull-Rom (0,0,1,1), 6 = Perlins Smootherstep
//7 = Abs add, 8 = Techicolor Cinestyle, 9 = Parabola, 10 =

Half-circles.
//Note that Technicolor Cinestyle is practically identical to

Sine, but runs slower. In fact I think the difference might only be due to rounding errors.
//I prefer 2 myself, but 3 is a nice alternative with a little

more effect (but harsher on the highlight and shadows) and it's the fastest formula.

/*-----------------------------------------------------------.
/ Sepia settings /
'-----------------------------------------------------------*/
#define ColorTone float3(1.40, 1.10, 0.90) //[0.00 to 2.55, 0.00 to 2.55, 0.00 to 2.55] What

color to tint the image
#define GreyPower 0.11 //[0.00 to 1.00] How much desaturate the image

before tinting it
#define SepiaPower 0.58 //[0.00 to 1.00] How much to tint the image


/*-----------------------------------------------------------.
/ Vignette settings /
'-----------------------------------------------------------*/
#define VignetteType 1 //[1|2|3] 1 = Original, 2 = New, 3 = TV style
#define VignetteRatio 1.00 //[0.15 to 6.00] Sets a width to height ratio. 1.00 (1/1) is

perfectly round, while 1.60 (16/10) is 60 % wider than it's high.
#define VignetteRadius 1.00 //[-1.00 to 3.00] lower values = stronger radial effect from

center
#define VignetteAmount -1.00 //[-2.00 to 1.00] Strength of black. -2.00 = Max Black, 1.00 =

Max White.
#define VignetteSlope 8 //[2 to 16] How far away from the center the change should

start to really grow strong (odd numbers cause a larger fps drop than even numbers)
#define VignetteCenter float2(0.500, 0.500) //[0.000 to 1.000, 0.000 to 1.000] Center of

effect for VignetteType 1. 2 and 3 do not obey this setting.


/*-----------------------------------------------------------.
/ Dither settings /
'-----------------------------------------------------------*/
#define dither_method 1 //[1 or 2] 1 = Ordered dithering (very good and very fast), 2

= Random dithering (different but slightly slower dithering)

//Note that the patterns used by Dither, makes an image harder to compress.
//This can make your screenshots and video recordings take up more space.


/*-----------------------------------------------------------.
/ Border settings /
'-----------------------------------------------------------*/
#define border_width float2(1,20) //[0 to 2048, 0 to 2048] (X,Y)-width of the border.

Measured in pixels.
#define border_color float3(0, 0, 0) //[0 to 255, 0 to 255, 0 to 255] What color the border

should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white.


/*-----------------------------------------------------------.
/ Splitscreen settings /
'-----------------------------------------------------------*/
#define splitscreen_mode 1 //[1|2|3|4|5|6] 1 = Vertical 50/50 split, 2 = Vertical

25/50/25 split, 3 = Vertical 50/50 angled split, 4 = Horizontal 50/50 split, 5 = Horizontal

25/50/25 split, 6 = Curvy vertical 50/50 split

/*-----------------------------------------------------------.
/ Custom settings /
'-----------------------------------------------------------*/
#define custom_strength 1.0 //[0.00 to 1.00] Adjust the strength of the effect

knowom 08-02-2015 07:23 PM
I'll probably tweak it more, but this is how the above settings I posted look like for EQ.
http://i127.photobucket.com/albums/p...psh6csugbh.jpg
Also here's what some LOD bias tweaks do as well. at +15, +10, +3, -3 LOD bias values.

http://i127.photobucket.com/albums/p...psxxvxihmd.jpg
http://i127.photobucket.com/albums/p...psmsdaxeoq.jpg
http://i127.photobucket.com/albums/p...psxofojzvg.jpg
http://i127.photobucket.com/albums/p...pslvzntjth.jpg

Another SweetFX photo showing tweaks setting values above.
http://i127.photobucket.com/albums/p...pshimva4d7.jpg

I'd still like to try some other settings like SMAA/FXAA/Bloom/HDR and probably a few others as well. I may tone down the vibrance setting from 0.25 to 0.20 or even 0.10 instead not sure it needs quite that much extra saturation default SweetFX setting for it was 0.15, but that's kind of a odd setting I felt to leave it at so tried a bit higher which I felt would work well with cartoon settings 20-25% increase seems more appropriate and natural to me. Overall I think it looks a bit less washed out and grey scale under saturated feeling than it looks by default with just a slight hint of cartoon look added it looks noticeably warmer and more inviting now and a touch more colorful, but not glaringly over saturated LumaSharpen helped a lot also to increase image sharpness clarity tweaked it just to the point where I didn't notice obvious artifacts from over sharpening.

knowom 08-02-2015 10:48 PM
Quote:
#define USE_DITHER 1
I recommend setting it to 0 made the sky look ugly and scale like almost.

I enabled SMAA and tweaked it to it's "ultra" configuration preset below

Quote:
/*-----------------------------------------------------------.
/ SMAA Anti-aliasing settings /
'-----------------------------------------------------------*/

#define SMAA_THRESHOLD 0.05 //[0.05 to 0.20] Edge detection threshold. If SMAA misses some edges try lowering this slightly. I prefer between 0.08 and

0.12.
#define SMAA_MAX_SEARCH_STEPS 32 //[0 to 98] Determines the radius SMAA will search for aliased edges
#define SMAA_MAX_SEARCH_STEPS_DIAG 16 //[0 to 16] Determines the radius SMAA will search for diagonal aliased edges
#define SMAA_CORNER_ROUNDING 25 //[0 to 100] Determines the percent of antialiasing to apply to corners. 0 seems to affect fine text the least so it's the

default.
Currently how things look with latest adjustment changes
http://i127.photobucket.com/albums/p...pspqd2wlw4.jpg

Will have to try FXAA Anti-aliasing settings tomorrow not sure if both can be enabled for a best of both worlds effect or not, but in any case it's worth comparing. Will also probably try other stuff too just want to see how well I can tune these tweak settings for different things they are quite nice.

knowom 08-03-2015 12:33 PM
Tweaked some stuff further made some adjustments to MSAA/FXAA though have FXAA disabled for now you can enable both, but it if anything all it does it make it a bit more blurry if MSAA is also enabled and separately that AA is better FXAA is better performance I think at the cost of IQ if I'm not mistaken.

I also enabled and adjust bloom a bit it's there, but set conservatively. Enabled and tweaked Lift Gain Gamma slightly just to enhance shadows and highlights lightly, but kept midtones neutral though you could always skew that +/- 5 to fine tune the results or go crazy adjust those settings I went for a fairly unobtrusive touch up to them.

Also set
Quote:
#define Vibrance 0.10
awhile earlier, but may adjust it back to 0.20 to see how it looks now with the other adjustments that's more preference it makes it look warmer and less bleak basically though if set to high clips darker colors a lot.

Anyway here's current results on how my settings are looking.
http://i127.photobucket.com/albums/p...psyybtcklq.jpg

Vaneheart 08-28-2015 12:28 AM
Been messing with this using RadeonPro. The settings, while subtle, look pretty good. I'm curious to see how your final efforts turn out, especially if you ended up getting Reshade going.

knowom 08-28-2015 11:06 PM
Quote:
Originally Posted by Vaneheart (Post 242794)
Been messing with this using RadeonPro. The settings, while subtle, look pretty good. I'm curious to see how your final efforts turn out, especially if you ended up getting Reshade going.
I didn't get into tweaking it any further and I was going for relatively subtle. I'd suggest trying the #define Vibrance and setting it higher you didn't you'll get a lot more noticeable impact a more vibrant warmer look in general. There was more stuff I didn't try that could be tweaked as well. Davood could have some pointers as well perhaps since he mucked around with it as well. I didn't end up trying ReShade, but anyway good luck.

Vaneheart 08-29-2015 05:42 PM
Alright, I'll mess around with it and see what happens. Been mixing it with an ENB Injector, to some decent results.

Shin Noir 09-25-2015 11:23 PM
haven't fine tuned anything but.
No Shaders
http://i.imgur.com/nF5C3Ki.jpg
---
Shaders in SS
http://i.imgur.com/GNjrWWh.jpg

Note that the UI is being affected with shaders too..

Shin Noir 09-25-2015 11:43 PM
Bloom Effect may be up too high. Lol.
http://i.imgur.com/XKmtmSB.jpg

knowom 03-18-2016 03:49 PM
Quote:
Originally Posted by Shin Noir (Post 243521)
haven't fine tuned anything but.
No Shaders
http://i.imgur.com/nF5C3Ki.jpg
---
Shaders in SS
http://i.imgur.com/GNjrWWh.jpg

Note that the UI is being affected with shaders too..
GeDoSaTo is worth mentioning it's basically SweetFX/reShade, but you can configure it so it doesn't apply to UI elements thus you can crank the other settings a bit harder w/o it impacting them negatively. It's crazy how many new post process injector tweaks have come about in the last year or two great time to be a gamer.


All times are GMT -4. The time now is 01:27 PM.

Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.