EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   Support::General Support (https://www.eqemulator.org/forums/forumdisplay.php?f=598)
-   -   Improved Healing? (https://www.eqemulator.org/forums/showthread.php?t=43232)

Nerdgasm 03-12-2021 05:45 PM

Improved Healing?
 
Hey everyone, I can't seem to make Improved Healing work at all, is there a specific thing I gotta do to make it work, I made a new spell that is a heal spell, literally a copy/paste of like, a Paladin healing spell, and it doesn't seem to be effected by improved healing...

Nerdgasm 03-12-2021 05:48 PM

Mmm nevermind, I think I figured it out... Whoops, lol.

NatedogEZ 03-12-2021 06:42 PM

Should post what you did to fix / figure out the issue incase anyone else has a similar issue and your post will help them :)

I'm sure it was something like a brain slip but either way it could help someone!

Nerdgasm 03-12-2021 06:53 PM

Quote:

Originally Posted by NatedogEZ (Post 266353)
Should post what you did to fix / figure out the issue incase anyone else has a similar issue and your post will help them :)

I'm sure it was something like a brain slip but either way it could help someone!

Ah yes, I'm sorry.

When using Improved Healing, it goes off of 0 for the effectid. I had it on 79 because it was a just a regular heal and I thought that was what needed to be done. =). So if you use Improved Healing, make sure your effectid is on 0 instead of 79, even though 79 is a heal.

Splose 03-12-2021 11:53 PM

Quote:

Originally Posted by Nerdgasm (Post 266354)
Ah yes, I'm sorry.

When using Improved Healing, it goes off of 0 for the effectid. I had it on 79 because it was a just a regular heal and I thought that was what needed to be done. =). So if you use Improved Healing, make sure your effectid is on 0 instead of 79, even though 79 is a heal.

You can change your heal spell back to use effect ID 79 and make it work properly.

Below is a picture of Improved Healing I's data. (Spell ID 2345) If you look at spell effect 3 below it is using ID 137 which is a focus limiter that basically tells the focus to either only use or not use whatever ID it supplies. If you add another ID of 137 and instead of 0 put 79 it will work on 79 as well.

79 would be include.. -79 would be exclude for example.

https://i.gyazo.com/25d377fca0acb41b...a879b3a2f1.png


All times are GMT -4. The time now is 02:29 AM.

Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.