Thoughts on Armor Class
 

When looking at the AC formula for the EMU I've noticed one major flaw that is incorporated when compared to EQLive. EQLive AC does not actually lower the maximum hit of the NPC, but EQEMU code does.

What AC seems to do though, is lower the average damage taken - basically making it so while you sometimes can take a max hit, you will often take lower damage overall the higher your AC is.

So what I propose is an added factor into the mitigation equation, sort of a mod which determines "will this hit do max damage? or will it be mitigated slightly?" Obviously we'll need to include other factors which I believe haven't been coded yet, like monster attack values, level vs player level, etc. All of those should have an impact on the effectiveness of mitigation as well - much like they seem to do on EQLive.

I'm going to be testing this out on my server over the next few days - so far all I've done is added a random factor of sorts called "acFac" that creates a random value to decrease the hit by - starting at 0 and going up to the value that previously decreased the hit every time.

Old code looks like this:
And with acFac added:
Now currently it uses MakeRandomFloat(), but I'd like to hear opinions. Should it use this or MakeRandomInt()? I'm not sure myself, MakeRandomFloat() gives a wider array of possible damage values, but so far in the minor testing I've done, I've yet to be hit for max damage.

But the good news is, even with insane AC, the hit values are much more inline with what you'd expect from EQLive. I'll be parsing the averages as well during testing to see if there's any positive effect of higher AC in that regard.

Basically to give an example:

With the old code above, an even con NPC with a max hit of 500 with the character having over 6k AC(yes this is VERY extreme, but I wanted to confirm what I expected) would hit for around 108 at most - this was over a 10 minute period of being hit constantly, never once was I hit for more than that.

Now, with acFac added in, the max hit was at about 496. I'll update with tests of various AC values to see if decreases in average damage occur like I hope they will.

I took a slightly different approach to this.

I would think that AC should always give *some* protection against damage. The amount should vary with each hit. I agree with you that it should not be a constant.

Here's what I did:

So you get 5% to 10% protection from each hit. These values need to be adjusted. But it doesn't seem to me that if you have a lot of AC that you should ever get hit for the maxdmg.

Some quick parses
 

I did a few brief parses with some test items I created to see if higher AC does indeed decrease average damage while allowing the max hit to remain possible, with this code. I found some interesting things out that I hadn't checked yet.

For one, minhit doesn't appear to be working correctly, I'll see about fixing it(or adding it if it just wasn't ever put in), and trying the parses again later. I'm wondering just how much minhit not working properly factors into the decrease in average damage - we shall see.

Now on to the parses:
Time..................AC...................MinHit............MaxHit...........Avg
4:28..................762.................163(1).. ..........498(2)..........365
4:42................1548.................159(1)... .........499(1)..........352
4:46................2336.................136(1)... .........496(1)..........325
4:43................3123.................100(1)... .........496(1)..........304
4:50................3910...................93(1).. ..........489(1)..........280
4:46................4697...................73(1).. ..........499(1)..........261
4:50................5485...................45(1).. ..........495(1)..........235
4:46................6271.....................1(4). ...........490(1)..........201

Now some info on the NPC in question - it was a level 65 NPC with a minimum hit of 125 and a maximum hit of 500. As you'll see from the parses, even with extreme increases in AC, max hit is still possible to acheive, while average hit continues to decrease.

I used fairly drastic increases in AC with these parses, I'll be creating a few realistic item sets over the next day or so and running tests with them. For anyone wondering, those AC values were the client values. Below is a list of each AC value and the #showstats value in parenthesis.

762(1306)
1548(2592)
2336(3880)
3123(5167)
3910(6453)
4697(7741)
5485(9028)
6271(10315)

As you can see the AC code definitely needs tweaking as the server thinks the player has way more AC than the client does.

That's a really good idea as well. One of the main reasons I thought it would be good to always make max possible when factoring raw AC is because of other variables that I'll be adding on my server, such as certain stats lowering max hit, etc.

Just enjoy this being discussed
 

Rolemaster vs Ad&d styles =).
Good to see computers didn't bury the question 8)

Re: Just enjoy this being discussed
 

Rolemaster > AD&D ....especially since this type of combat could be computed on the fly and not interrupt game play. :)

Anyway, back to the AC topic - I'm looking forward to this being implemented... my level 8 ranger was killing mobs that were level 20 because their AC was funked up. Hehe... just not right.

We've been testing this on our server for about a month. After several adjustments, this is what we ended up with. As I say it isn't right, but its better than nothing.

If you're thinking of adding unque functions and methods to your server then I would #ifdef it and make it right for you. The code for our server is full of #ifdef SCORPIOUS2K. :-)

Re: Just enjoy this being discussed
 

Heh... busted. Yup, I'm and old AD&D player.

Re: Just enjoy this being discussed
 

That's not the code, its the DB. When you have a DB designed for virtually no AC, when it comes into the calculation you find mobs suddenly can't touch you. The values for mindmg and maxdmg have to be adjusted. We made several DB value changes before we felt it was right.

Fair is fair... I'm looking at way way to give mobs AC too. That should make things more interesting.

Re: Just enjoy this being discussed
 

Well the min and max dmg of a mob does little to combat a ranger with a bow. :) I like your idea of AC for mobs though. I think the game will improve a LOT once ac is factored for pc's and ac is added for mobs.

A bump to a very old post, I know, but I've been away for a long time due to many reasons and figured I'd update folks with the minhit not working that I found.

It's because AvoidDamage in attack.cpp doesn't recognize it as minhit - it still reduces the damage done when factoring in AC, even for the minhit.

To give an example:

NPC has minhit of 200, maxhit of 500
NPC hits for minhit and it's then sent to Mob::AvoidDamage() as the damage amount - which has AC factored in to lower that damage even more.

What I did to fix this was add another field to Mob::AvoidDamage() and called it minhit. This then pulled the minimum damage an npc can hit for and factored it into AvoidDamage. I then put a check in Mob::AvoidDamage in attack.cpp to ensure that if after the AC mods were factored in, the damage was lower than minhit, it used minhit as the damage value.

Killspree i would very much like your code additions for this. and I would love them to be put in the CVS as well.

I am very unsatisfied with the way combat is working for my server. With ac added that is on par with or less than the average player of the same lvl, combat is very trivial as the mobs can barely hit the player.

I like your numbers and they appear to be more like live that the current ac system allows.

cant really do much until
 

The exact formula for mob dmg is already known for most part it is..

ripping this from.. http://www.thesteelwarrior.org/forum...hread.php?t=13


Restatement of model:

Quote:
The damage a mob does on a standard hit is DB + x*DI, where DB stands for Damage Bonus, DI stands for Damage Interval, and x is an integer between 1 and 20 (inclusive)


Breakdowns:

Damage = DB + (x*DI)
DI (Damage Interval) = (max hit) - (min hit) / 19
DB (Damage Base) = (min hit) - DI
x = integer between 1 and 20, inclusive
min hit = DB + DI
max hit = DB + 20*DI



So youd have to rewrite the dmg model first as it stands, then figure out a way to incorporate AC from a mob hitting a PC.

There is no way to figure the exact curve because of several reasons.

1. We have no way of knowing the MOBs ATK value.
2. We dont know the exact effects of def. AA on AC and mitigation.


In general if you chart a curve based on mobs atk vs clients AC it is not linear, in fact there is a "soft cap" where adding more ac gets you less and less dmg reduction.

Hmm. very interesting read. perhaps they can use this to re-vamp the combat system.

Yeah but the problem is this formula is probably not entirely accurate, and it doesn't take into account AC or attack or anything else. The formulas posted everywhere on the web are just guesses that fit the data most of the time. Also those variables are different for every mob and theres no good way to figure them out. Its pretty much useless because the formula for the initial calculation of damage at least is pretty good and reasonably accurate in the Emu. Our problem is mostly in factoring in AC and attack which this doesn't touch.