EQEmulator Forums - Minilogin 1017 Error

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Archive::Tutorials/Howto's (https://www.eqemulator.org/forums/forumdisplay.php?f=619)

- - Minilogin 1017 Error (https://www.eqemulator.org/forums/showthread.php?t=12683)

Minilogin 1017 Error

I followed the guide on the sticky in this forum.

I changed my LoginServer.ini, db.ini, and added MiniLoginAccounts.ini

MiniLoginAccounts.ini:

127.0.0.1 MyEqEmuAcctName mypw

*
The guide said have a space " " at the end of it so i put that there... n stuff

db.ini:

[Database]
host=localhost
user=mysql username
password=mysql pw
database=eq
compression=off

LoginServer.ini:

[LoginServer]
loginserver=192.168.1.xxx <-- Internal IP
loginport=5999
worldname=Jikx's [In Development]
worldaddress=192.168.1.xxx <-- Internal IP
locked=false

[WorldServer]
Defaultstatus=0
Unavailzone=

I start up Minilogin.exe:

[LoginConfig] block not found in LoginServer.ini.
MiniLoginAccounts.ini read.
Server mode: Standalone
Login server listening on port:5999

I start up World.exe:

[Status] CURRENT_WORLD_VERSION:EQEMu 0.5.5-DR1
[Status] Loading variables..
[Status] Loading zones..
[Status] Loading items..
[Status] EMuShareMem loaded
[Status] Loading items from database: count=26687, max id=68199
[Status] ./LoginServer.ini read.
[Status] Loading guild ranks..
[Status] Loading ./addon.ini..
[Status] Loading EQ time of day..
[Status] Reboot zone modes ON
[Status] Deleted 0 stale player corpses from database
[Status] Deleted 0 stale player backups from database
Breaking bards...done
TCP listening on: 192.168.1.xxx:9000
World server listening on: 192.168.1.xxx:9000
Connected to LoginServer: 192.168.1.xxx:5999

I start up Boot5Zones.bat:

[Status] CURRENT_ZONE_VERSION: EQEMu 0.5.5-DR1
[Status] Loading Variables
[Status] Loading zone names
[Status] Loading items
[Status] EMuShareMem loaded
[Status] Loading npcs
[Status] Loading NPCTypes from database...
[Status] Loading npc faction lists
[Status] Loading NPC Faction Lists from database...
[Status] Loading loot tables
[Status] Loading Loot tables from database...
[Status] Loading doors
[Status] Loading Doors from database...
[Status] FileLoadSPDat() Loading spells from ./spells_us.txt
[Status] FileLoadSPDat() spells loaded: 5021
[Status] Loading guilds
[Status] Loading factions
[Status] Loading corpse timers
[Status] Loading what ever is left
[Status] Loading commands
[Status] command_init(): Warning: Command 'help' defaulting to access level 0!
[Status] command_init(): Warning: Command 'version' defaulting to access level 0
!
[Status] command_init(): Warning: Command 'serversidename' defaulting to access
level 0!
[Status] command_init(): Warning: Command 'loc' defaulting to access level 0!
[Status] command_init(): Warning: Command 'flag' defaulting to access level 0!
[Status] command_init(): Warning: Command 'si' defaulting to access level 0!
[Status] 157 commands loaded
[Status] Entering sleep mode
Connected to worldserver: 192.168.1.xxx:9000

I start up eqgame.exe and put in my account info and see "Jikx's [In Development] Server" woot gogo!

Try to connect and I get 1017 Error.

I get this in World.exe

[Status] CURRENT_WORLD_VERSION:EQEMu 0.5.5-DR1
[Status] Loading variables..
[Status] Loading zones..
[Status] Loading items..
[Status] EMuShareMem loaded
[Status] Loading items from database: count=26687, max id=68199
[Status] ./LoginServer.ini read.
[Status] Loading guild ranks..
[Status] Loading ./addon.ini..
[Status] Loading EQ time of day..
[Status] Reboot zone modes ON
[Status] Deleted 0 stale player corpses from database
[Status] Deleted 0 stale player backups from database
You may already be a winner... of the darwin award.
TCP listening on: 192.168.1.xxx:9000
World server listening on: 192.168.1.xxx:9000
Connected to LoginServer: 192.168.1.xxx:5999
80506 New TCP connection: 192.168.1.xxx:1453
New zoneserver: #1 192.168.1.xxx:1453
Zoneserver SetConnectInfo: 192.168.1.xxx:1453: 192.168.1.xxx:7998
80857 New TCP connection: 192.168.1.xxx:1454
80857 New TCP connection: 192.168.1.xxx:1455
80857 New TCP connection: 192.168.1.xxx:1456
80857 New TCP connection: 192.168.1.xxx:1457
New zoneserver: #2 192.168.1.xxx:1457
New zoneserver: #3 192.168.1.xxx:1456
New zoneserver: #4 192.168.1.xxx:1455
New zoneserver: #5 192.168.1.xxx:1454
Zoneserver SetConnectInfo: 192.168.1.xxx:1454: 192.168.1.xxx:7997
Zoneserver SetConnectInfo: 192.168.1.xxx:1455: 192.168.1.xxx:7999
Zoneserver SetConnectInfo: 192.168.1.xxx:1456: 192.168.1.xxx:7995
Zoneserver SetConnectInfo: 192.168.1.xxx:1457: 192.168.1.xxx:7996
253465 New client from ip: 192.168.1.xxx port: 1460
192.168.1.xxx: Wrong name/pass: name='eqemu'
Removing client from ip:192.168.1.xxx port:1460

*

I think it's a problem in my MiniLoginAccounts.ini ?

Two things can be done here.. First I know it said to leave a space at the end of the last letter, but also note that after you press space, DONT press the enter key, as it will be read into the file as a newline character, which WILL cause 1017...

The other thing is to actually insert the account into the DB... There are two ways to do this... The first:
Open up a dos command and change directory to the directory that contains the world.exe file... Now type the following:

Code:

world adduser eqemu eqemu 200

Where the first eqemu is your intended username and the second is the intended password...

The second method is as follows:
Open up a dos command window and type the following:

Code:

cd c:/mysql/bin

mysql -u root mysql

USE eq;                     (assuming eq is the name of your DB)

INSERT INTO account SET name='eqemu', password='eqemu', status=200;

quit

Note that again eqemu is to be replaced with whatever your UN and PW are in your miniloginaccounts.ini file are... Hope this helps>>>>>>>>>:)

One more thing of note, you can change everything to localhost or 127.0.0.1 if you are running all the parts of the server from the same pc.. They dont even need to know the internal IP. They just need to know that it is on the same machine..

One thing that i have learned from experience, which is probably not the way to do it, but should work :

change loginserver.ini - change worldaddress to localhost
change loginserver.ini - change the loginserver block to :

loginserver = eqlogin1.eqemulator.net
port = 5997

in boot5zones.bat - change every ip to localhost

then run world.exe, and run boot5zones.bat

Your server name will show up on the regular server select screen as if it were public, but it will only allow you to connect.

That is what i have mine set as when i dont want to make it public, hope it works for you.

Yes, that will work, however, it will NOT work if he is NOT running the client from the same machine.

I am running it from the same machine :p anyway...

I started all over again, deleted all the files and re downloaded all the files and followed furyfizts's or wutever his name is guide and i am not getting that bad password/username name error anymore. instead I am getting:

Code:

52305 New client from ip: 192.168.1.xxx port: 3099

[Error] Expecting OP_SendLoginInfo, got 254

Removing client from ip:192.168.1.xxx port:3099

LoginServer.ini:

Code:

# READ README.TXT

[LoginServer]

loginserver=192.168.1.xxx

loginport=5999

worldname=Jikx's Test

worldaddress=192.168.1.xxx

locked=false



[WorldServer]

Defaultstatus=0

Unavailzone=



[LoginConfig]

ServerMode=Standalone

ServerPort=5999

UplinkAddress=

UplinkPort=

UplinkAccount=

UplinkPassword=

db.ini:

Code:

[Database]

host=localhost

user=mysql username

password=mysql pw

database=testme

compression=off

Boot5Zones.bat in text file:

Code:

REM: ****Read this first!!!****



REM: This file requires your real 192.168.1.xxx in the place of "Your192.168.1.xxx" when you are connecting

REM: To the EQEmu Loginserver.



REM: When you are using minilogin, Replace all 192.168.1.xxx Addresses to say 127.0.0.1



REM: If you still get errors try using localhost instead of 127.0.0.1



REM:--------------Start-----------------------

@echo off



if NOT exist spells_us.txt goto NOSPELL



start zone . 192.168.1.xxx 7995 192.168.1.xxx

start zone . 192.168.1.xxx 7996 192.168.1.xxx

start zone . 192.168.1.xxx 7997 192.168.1.xxx

start zone . 192.168.1.xxx 7998 192.168.1.xxx

start zone . 192.168.1.xxx 7999 192.168.1.xxx

exit

cls



:NOSPELL

echo You did not copy the spells_en.txt from your everquest directory to this one.  Please do so or zones will crash on startup.

PAUSE



REM:---------------END------------------------

MiniLoginAccounts.ini

Code:

127.0.0.1 myemuacct myemupw

<space after my pw>

MiniLogin.exe:

Code:

LoginServer.ini read.

MiniLoginAccounts.ini read.

Server mode: Standalone

Login server listening on port:5999

World.exe:

Code:

[Status] CURRENT_WORLD_VERSION:EQEMu 0.5.2

[Status] Loading variables..

[Status] Loading zones..

[Status] Loading items..

[Status] EMuShareMem loaded

[Status] Loading items from database: count=26679, max id=68199

[Status] LoginServer.ini read.

[Status] Loading guild ranks..

[Status] Loading addon.ini..

[Status] Loading EQ time of day..

[Error] Could not load EQTime file ./eqtime.cfg

[Error] Unable to load ./eqtime.cfg

[Status] Reboot zone modes ON

[Status] Deleted 0 stale player corpses from database

[Status] Deleted 0 stale player backups from database

Breaking linux compiles....

TCP listening on: 192.168.1.xxx:9000

World server listening on: 192.168.1.xxx:9000

Connected to LoginServer: 192.168.1.xxx:5999

28240 New TCP connection: 192.168.1.xxx:3092

New zoneserver: #1 192.168.1.xxx:3092

Zoneserver SetConnectInfo: 192.168.1.xxx:3092: 192.168.1.xxx:7997

28441 New TCP connection: 192.168.1.xxx:3093

28441 New TCP connection: 192.168.1.xxx:3094

28441 New TCP connection: 192.168.1.xxx:3095

28441 New TCP connection: 192.168.1.xxx:3096

New zoneserver: #2 192.168.1.xxx:3095

New zoneserver: #3 192.168.1.xxx:3094

New zoneserver: #4 192.168.1.xxx:3093

Zoneserver SetConnectInfo: 192.168.1.xxx:3093: 192.168.1.xxx:7999

Zoneserver SetConnectInfo: 192.168.1.xxx:3094: 192.168.1.xxx:7998

Zoneserver SetConnectInfo: 192.168.1.xxx:3095: 192.168.1.xxx:7995

New zoneserver: #5 192.168.1.xxx:3096

Zoneserver SetConnectInfo: 192.168.1.xxx:3096: 192.168.1.xxx:7996

52305 New client from ip: 192.168.1.xxx port: 3099

[Error] Expecting OP_SendLoginInfo, got 254

Removing client from ip:192.168.1.xxx port:3099

Boot5zones.bat:

Code:

[Status] CURRENT_ZONE_VERSION: EQEMu 0.5.2

[Status] Loading Variables

[Status] Loading zone names

[Status] Loading items

[Status] EMuShareMem loaded

[Status] Loading npcs

[Status] Loading npc faction lists

[Status] Loading loot tables

[Status] Loading doors

[Status] Loading guilds

[Status] Loading factions

[Status] Loading corpse timers

[Status] Loading what ever is left

[Status] Loading commands

[Status] 148 commands loaded

[Status] Entering sleep mode

Connected to worldserver: 192.168.1.xxx:9000

I see no errors in any of my ini files...-
anyone know what my problem is?

I downloaded everything from the guide on the sticky on how to make a minilogin server.. dont think im missing any files.. atleat i hope :D

P.S. This was a 1017 error when connecting to the server. Yes I have all the correct ports opened cause I used to run a server for all and everyone had np connecting :D

You need 5.5 binaries, not 5.2.

will that fix

Code:

[Error] Expecting OP_SendLoginInfo, got 254

oh and do you have a link to the 5.5 binaries i can use for minilogin? thx :D

Probably, and no - get them off Shawns site (khuongs now I think - try IRC).