Custom Full PvP Unholy Grounds Server (Alpha Testing)
 

Hi all ive created a custom zone/mobs/loot server with full PVP(no restrictions). Im opening it up for 24 hours so I can get some suggestions for the server so I can apply changes best suitable for the community. Try it out, its called Unholy Grounds Alpha Testing

server crashed, up again

Can't connect to your world. You probably need to open your routers ports so outside traffic can get in.

how about now? I've searched for "Open Router Ports" and configured some stuff... This all seems VERY confusing, Im not good with port forwarding and opening ranges at all

No good. Are you forwarding both UDP and TCP, 9000, and 7000-7100.
You need to forward them to your server's network address example: (192.168.1.5)

Ive only forwarded to TCP 9000, and i do it through the firewall>exceptions tab... Im not sure how to forward a range like 7000-7100 and im not sure how to forward it towards my servers network address which is (192.168.1.3) , mind giving a hand ?


=====================================
Some Customization in the starting zone for all class/races (Crushbone);

Enchy Pet
http://i74.photobucket.com/albums/i2...u/enchpet2.jpg

gmers
http://i74.photobucket.com/albums/i2...qEmu/gmers.jpg
http://i74.photobucket.com/albums/i2...Emu/gmers2.jpg

Invader who paths in and out the safe-startout cave
http://i74.photobucket.com/albums/i2...mu/invador.jpg

Weapon that spawns swarm pet; Allowed only 5 up to be up at once
http://i74.photobucket.com/albums/i2...u/palswarm.jpg

Bridge Guardian
http://i74.photobucket.com/albums/i2...Emu/bridge.jpg

Bridge Guardian after he dies (scripted)
http://i74.photobucket.com/albums/i2...idgerevive.jpg

Castles guards
http://i74.photobucket.com/albums/i2...ademasters.jpg

Crush & guards
http://i74.photobucket.com/albums/i2...rushguards.jpg

Crush at 50% , spawns a low hp druid orc every 5% of his heatlh that nukes (scripted) ...
http://i74.photobucket.com/albums/i2...rushmilita.jpg

Looks good, of course, you'll need to offer a patch for people to get those models loaded into crushbone. Just the crushbone_chr file.
As far as router, google your router name and port forward or something and see if you can find a guide. If you can't figure it out, tell me your router model/brand and i'll see what i can do.

No patch needed, all those models i put in crushbone are global models or models already used in eqlive for the zone =]

My router is :: Linksys Wireless-B Broadband Router (Model: BEFW11S4)

I would kinda need you to guide me after you get the information on my router since I really have no experience on port forwarding whatsoever ... Thank you moydock appreciate the help

Guide for your router:
http://portforward.com/english/route...4/Echolink.htm

kk followed the guides, and opened up ports 9000, and 7000-7100 ; Can you try it now and see if u can connect?

Works, but when I created a char, a yellow mob attacks me right off, and has too much regen to kill, so he just kills me over and over... lol

lmfao my bad, ill lower it down to 0 ... was worried if he would be too strong :P

Ima test it out :0