I can't unlock my own server
 

Ok I have read all the other posts and I made sure I did what everyone else has said to do, but I still have problems here are my files.

First my loginserver.ini



[LoginServer]
loginserver=eqlogin1.eqemu.net
loginserver2=eqlogin2.eqemu.net
loginport=5999
loginport2=5999
worldname=Ninja
account=
password=
worldaddress=12.221.105.77

[LoginConfig]
ServerMode=Standalone
ServerPort=5999
UplinkAddress=
UplinkPort=
UplinkAccount=
UplinkPassword=

Here is my boot5zones

start zoneNT . 127.0.0.1 7995 12.21.105.77
start zoneNT . 127.0.0.1 7996 12.21.105.77
start zoneNT . 127.0.0.1 7997 12.21.105.77
start zoneNT . 127.0.0.1 7998 12.21.105.77
start zoneNT . 127.0.0.1 7999 12.21.105.77

I run world.exe then I run the boot5zones.exe in that order as well. Anyone out there know what to do? Thanks

-Kinsin

You did not do it right lol.. where it says "YourIP" in boot5zones.bat, you put your REAL IP address.. not 127.0.0.1


See what your doing wrong? you need your IP in BOTH places, not just the second one.

Well I had done that, and it didn't work then I saw a post somewhere telling someone to change the first column back to the 127. blah blah stuff.

Ok I switched it to my ip and everything...and I just noticed that I get an error message in the zone windows

here is a Screenshot

http://www.geocities.com/bokuwakamides/Error.jpg

http://www.geocities.com/bokuwakamides/Error.jpg

Let me guess...this is an entirely different matter?

What OS are you on? do you have a firewall/proxy?

Im using Win2k and I do not have an installed proxy that I know of...I am using cable modem service and as I have read that can be a little tricky with EQEmu.

REM: ****Read this first!!!****

REM: This file requires your real IP in the place of "YourIP" when you are connecting
REM: To the EQEmu Loginserver.

REM: When you are using minilogin, Replace all IP Addresses to say 127.0.0.1

REM: If you still get errors try using localhost instead of 127.0.0.1


REM: zoneNT.exe is for use with Windows NT, 2000 and XP.

REM:--------------Start-----------------------


@echo off
start zoneNT . 24.127.8.45 7995 127.0.0.1
start zoneNT . 24.127.8.45 7996 127.0.0.1
start zoneNT . 24.127.8.45 7997 127.0.0.1
start zoneNT . 24.127.8.45 7998 127.0.0.1
start zoneNT . 24.127.8.45 7999 127.0.0.1
exit
cls


REM:---------------END------------------------



The above file works on my XP.

cut and past it to your 2000 in notepad or wordpad save as Boot5Zones.bat in c:\eqemu or your eqemu directory. Then change 24.127.8.45 to your IP (12.21.107.77 i am assuming) in all five spots and save again. It should work. Good luck.

Re: I can't unlock my own server
 

ahhhh wait a sec, the forums are telling me your IP is actually 12.221.105.77, not 12.21 like you have down there.. double check the IP :)