can't find map
 

when ever it trys to load a zone it kicks you out and shuts the zone down
Map: Maps\felwithea.map not found
ZoneID = 61
Reading Zhdr file './cfg/felwithea.cfg'
Using database fpr safe coords.
Zone safe coords are x = 94; y = -25; z= 4
---------------
Zone server 'felwithea' listening on port:7996
---------------
4995253 New client from ip: 192.168.1.102 =: 2171
Login packet 1 (OP_SetDataRate = 5)
Unexpected packet during CLIENT_CONNECTING2: OpCode: 0xe821, size:4
0: 00 00 A0 40 | .....@
Unexpected packet during CLIENT_CONNECTING2: OpCode: 0xe821, size : 4
0: 00 00 A0 40 | .....@
Login packet 2
Client dropped GetAuthentication = 0 n=Djkain
Dropping client: Process=false, ip=192.168.102, port=2171
Automatic shutdown
Message:----SERVER SHUTDOWN-----
Zone shutdown: going to sleep

i am wondering what is wrong no one can connect to my zones and i have set it up the way the readme says does the EQEmu need to be on the c: drive or can it be on the k: drive?
Thanks
DJ

Do not use "maps", thay are not needed.

your problem is probably the unexpected packets. Those happen alot and usually pop up right before you crash or get disconnected. no eta on fix.

Thanks
 

donno how to switch maps off
but thanks for the info
Thanks
Andrew

You don't switch them off, if you don't have them, it doesn't use them.. how about I just get rid of that message so people don't freak out

Fantasitic idea!

Original poster, I would be interested in the commands you are using to start the zone servers.

Please Kathgar! Make sure it won't try to load them if they are in the right place too, used to crash the emu if you had showEQ maps in that location....

Well, showeq .maps are, WAY different.. so, it would b0rk it g00d!

starting the zones
 

i start them with the world.exe then the bat file the readme says to use to start them

Good.. what's your batch file look like?