EQEmulator Forums

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)
-   Support::Windows Servers (https://www.eqemulator.org/forums/forumdisplay.php?f=587)
-   -   build fail (https://www.eqemulator.org/forums/showthread.php?t=38807)

gibroni 09-21-2014 05:57 PM
build fail
 
Downloaded latest comit and tried to build
Under vs 2010 prof, windows 7 64 bit. Getting
10 failed builds, something about
Fatal error, cannot open file... \bin\relwithdebinfo\common.lib

joligario 09-21-2014 06:50 PM
There were a few commits today, so you may want to be more specific. I recommend running a Clean Solution and rebuild. Then post entire error window to be more exact than "something about".

lerxst2112 09-21-2014 08:38 PM
It's better to rebuild, then build again, so the output will only have the errors, not thousands of lines of useless compile information.

gibroni 09-22-2014 07:18 PM
just redownloaded a another git comit as of 20 minutes ago and this is the output im getting on building

1>------ Build started: Project: ZERO_CHECK, Configuration: RelWithDebInfo x64 ------
1>Build started 9/22/2014 4:13:48 PM.
1>InitializeBuildStatus:
1> Creating "x64\RelWithDebInfo\ZERO_CHECK\ZERO_CHECK.unsucces sfulbuild" because "AlwaysCreate" was specified.
1>FinalizeBuildStatus:
1> Deleting file "x64\RelWithDebInfo\ZERO_CHECK\ZERO_CHECK.unsucces sfulbuild".
1> Touching "x64\RelWithDebInfo\ZERO_CHECK\ZERO_CHECK.lastbuil dstate".
1>
1>Build succeeded.
1>
1>Time Elapsed 00:00:00.05
2>------ Build started: Project: common, Configuration: RelWithDebInfo x64 ------
2>Build started 9/22/2014 4:13:48 PM.
2>InitializeBuildStatus:
2> Touching "common.dir\RelWithDebInfo\common.unsuccessfulbuil d".
2>CustomBuild:
2> All outputs are up-to-date.
2>ClCompile:
2> database.cpp
2>..\..\common\database.cpp(123): warning C4267: 'argument' : conversion from 'size_t' to 'uint32', possible loss of data
2>..\..\common\database.cpp(124): warning C4267: 'argument' : conversion from 'size_t' to 'uint32', possible loss of data
2>..\..\common\database.cpp(895): warning C4244: 'initializing' : conversion from 'float' to 'int', possible loss of data
2>..\..\common\database.cpp(898): warning C4018: '<' : signed/unsigned mismatch
2>..\..\common\database.cpp(1759): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1759): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1759): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1759): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1759): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(1759): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(1759): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(1759): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(1767): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1767): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1767): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1767): error C2039: 'isnan' : is not a member of 'std'
2>..\..\common\database.cpp(1767): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(1767): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(1767): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(1767): error C3861: 'isnan': identifier not found
2>..\..\common\database.cpp(2021): warning C4267: 'argument' : conversion from 'size_t' to 'uint32', possible loss of data
2>..\..\common\database.cpp(2022): warning C4267: 'argument' : conversion from 'size_t' to 'uint32', possible loss of data
2>..\..\common\database.cpp(2094): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2096): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2098): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2135): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2137): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2139): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2184): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2186): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2188): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2190): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2580): warning C4244: 'return' : conversion from 'uint16' to 'uint8', possible loss of data
2>..\..\common\database.cpp(2600): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2601): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2602): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
2>..\..\common\database.cpp(2671): warning C4267: 'argument' : conversion from 'size_t' to 'uint32', possible loss of data
2>..\..\common\database.cpp(3179): warning C4018: '<=' : signed/unsigned mismatch
2>..\..\common\database.cpp(3203): warning C4018: '<' : signed/unsigned mismatch
2>
2>Build FAILED.
2>
2>Time Elapsed 00:00:00.92
3>------ Build started: Project: shared_memory, Configuration: RelWithDebInfo x64 ------
4>------ Build started: Project: queryserv, Configuration: RelWithDebInfo x64 ------
5>------ Build started: Project: world, Configuration: RelWithDebInfo x64 ------
6>------ Build started: Project: loginserver, Configuration: RelWithDebInfo x64 ------
7>------ Build started: Project: import_client_files, Configuration: RelWithDebInfo x64 ------
8>------ Build started: Project: export_client_files, Configuration: RelWithDebInfo x64 ------
9>------ Build started: Project: eqlaunch, Configuration: RelWithDebInfo x64 ------
10>------ Build started: Project: ucs, Configuration: RelWithDebInfo x64 ------
3>Build started 9/22/2014 4:13:49 PM.
5>Build started 9/22/2014 4:13:49 PM.
6>Build started 9/22/2014 4:13:49 PM.
8>Build started 9/22/2014 4:13:49 PM.
4>Build started 9/22/2014 4:13:49 PM.
9>Build started 9/22/2014 4:13:49 PM.
10>Build started 9/22/2014 4:13:49 PM.
9>InitializeBuildStatus:
7>Build started 9/22/2014 4:13:50 PM.
9> Touching "eqlaunch.dir\RelWithDebInfo\eqlaunch.unsuccessful build".
9>CustomBuild:
9> All outputs are up-to-date.
9>ClCompile:
9> All outputs are up-to-date.
6>InitializeBuildStatus:
5>InitializeBuildStatus:
7>InitializeBuildStatus:
4>InitializeBuildStatus:
10>InitializeBuildStatus:
3>InitializeBuildStatus:
9>ManifestResourceCompile:
8>InitializeBuildStatus:
8> Touching "export_client_files.dir\RelWithDebInfo\export_cli ent_files.unsuccessfulbuild".
8>CustomBuild:
8> All outputs are up-to-date.
8>ClCompile:
8> All outputs are up-to-date.
8>ManifestResourceCompile:
8> All outputs are up-to-date.
9> All outputs are up-to-date.
9>LINK : fatal error LNK1104: cannot open file '..\bin\RelWithDebInfo\common.lib'
9>
9>Build FAILED.
9>
9>Time Elapsed 00:00:00.26
3> Touching "shared_memory.dir\RelWithDebInfo\shared_memory.un successfulbuild".
3>CustomBuild:
3> All outputs are up-to-date.
3>ClCompile:
3> All outputs are up-to-date.
3>ManifestResourceCompile:
3> All outputs are up-to-date.
3>LINK : fatal error LNK1104: cannot open file '..\bin\RelWithDebInfo\common.lib'
3>
3>Build FAILED.
3>
3>Time Elapsed 00:00:00.38
11>------ Build started: Project: zone, Configuration: RelWithDebInfo x64 ------
10> Touching "ucs.dir\RelWithDebInfo\ucs.unsuccessfulbuild" .
10>CustomBuild:
10> All outputs are up-to-date.
10>ClCompile:
10> All outputs are up-to-date.
10>ManifestResourceCompile:
10> All outputs are up-to-date.
10>LINK : fatal error LNK1104: cannot open file '..\bin\RelWithDebInfo\common.lib'
10>
10>Build FAILED.
10>
10>Time Elapsed 00:00:00.27
4> Touching "queryserv.dir\RelWithDebInfo\queryserv.unsuccessf ulbuild".
4>CustomBuild:
4> All outputs are up-to-date.
4>ClCompile:
4> All outputs are up-to-date.
4>ManifestResourceCompile:
4> All outputs are up-to-date.
4>LINK : fatal error LNK1104: cannot open file '..\bin\RelWithDebInfo\common.lib'
4>
8>LINK : fatal error LNK1104: cannot open file '..\..\bin\RelWithDebInfo\common.lib'
4>Build FAILED.
4>
4>Time Elapsed 00:00:00.26
8>
8>Build FAILED.
8>
8>Time Elapsed 00:00:00.34
7> Touching "import_client_files.dir\RelWithDebInfo\import_cli ent_files.unsuccessfulbuild".
7>CustomBuild:
7> All outputs are up-to-date.
7>ClCompile:
7> All outputs are up-to-date.
7>ManifestResourceCompile:
7> All outputs are up-to-date.
7>LINK : fatal error LNK1104: cannot open file '..\..\bin\RelWithDebInfo\common.lib'
7>
11>Build started 9/22/2014 4:13:50 PM.
7>Build FAILED.
7>
7>Time Elapsed 00:00:00.22
5> Touching "world.dir\RelWithDebInfo\world.unsuccessfulbuild" .
5>CustomBuild:
5> All outputs are up-to-date.
5>ClCompile:
5> All outputs are up-to-date.
5>ManifestResourceCompile:
5> All outputs are up-to-date.
5>LINK : fatal error LNK1104: cannot open file '..\bin\RelWithDebInfo\common.lib'
5>
5>Build FAILED.
5>
5>Time Elapsed 00:00:00.31
6> Touching "loginserver.dir\RelWithDebInfo\loginserver.unsucc essfulbuild".
6>CustomBuild:
6> All outputs are up-to-date.
6>ClCompile:
6> All outputs are up-to-date.
6>ManifestResourceCompile:
6> All outputs are up-to-date.
6>LINK : fatal error LNK1104: cannot open file '..\bin\RelWithDebInfo\common.lib'
6>
6>Build FAILED.
6>
6>Time Elapsed 00:00:00.32
11>InitializeBuildStatus:
11> Touching "zone.dir\RelWithDebInfo\zone.unsuccessfulbuil d".
11>CustomBuild:
11> All outputs are up-to-date.
11>ClCompile:
11> All outputs are up-to-date.
11>ManifestResourceCompile:
11> All outputs are up-to-date.
11>LINK : fatal error LNK1104: cannot open file '..\bin\RelWithDebInfo\common.lib'
11>
11>Build FAILED.
11>
11>Time Elapsed 00:00:00.32
12>------ Build started: Project: ALL_BUILD, Configuration: RelWithDebInfo x64 ------
12>Build started 9/22/2014 4:13:50 PM.
12>InitializeBuildStatus:
12> Creating "x64\RelWithDebInfo\ALL_BUILD\ALL_BUILD.unsuccessf ulbuild" because "AlwaysCreate" was specified.
12>CustomBuild:
12> Build all projects
12>FinalizeBuildStatus:
12> Deleting file "x64\RelWithDebInfo\ALL_BUILD\ALL_BUILD.unsuccessf ulbuild".
12> Touching "x64\RelWithDebInfo\ALL_BUILD\ALL_BUILD.lastbuilds tate".
12>
12>Build succeeded.
12>
12>Time Elapsed 00:00:00.08
13>------ Skipped Build: Project: INSTALL, Configuration: RelWithDebInfo x64 ------
13>Project not selected to build for this solution configuration
========== Build: 2 succeeded, 10 failed, 1 up-to-date, 1 skipped ==========

jdoran 09-22-2014 07:25 PM
Code tags please!

What compiler are you using? Is the code bring in <math> or <cmath>?

gibroni 09-22-2014 07:49 PM
Using VS 2010 professional and no clue what u mean by math or cmath.

Was compiling and Working fine until yesterdays comits.

jdoran 09-22-2014 08:09 PM
You might want to upgrade to a newer version of VS, the express editions are free. I work on Unix, but occasionally build things on Windows.

I'm looking at the missing isnan in the std namespace. This is one of the things which compilers don't always agree on. std::isnan is only supported in C++11, which is newer than your 2010 compiler.

The <cmath> vs <math> issue assumes you have a C++11 compiler.


All times are GMT -4. The time now is 04:22 AM.

Powered by vBulletin®, Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.