EQEmulator Forums - Cannon's Fury Server

EQEmulator Forums (https://www.eqemulator.org/forums/index.php)

- Support::General Support (https://www.eqemulator.org/forums/forumdisplay.php?f=598)

- - Cannon's Fury Server (https://www.eqemulator.org/forums/showthread.php?t=39610)

Cannon's Fury Server

Can I get someone to please log in to Cannon's Fury for a quick test. Server has been up a few days and not sure anyone can get in. Thanks.

Didn't work for me with UF client. Lemme try titanium

No go on Titanium or RoF client.

The most common causes of this are usually an IP entry in the eqemu_config.xml when it's not necessary and/or port forwarding.

Post your eqemu_config.xml while minding your usernames, passwords and randomstring (i.e. omitting them).

And what firewall software and/or router do you use?

I just set up port forwarding, its been many years since Ive had a server up and a little rusty. Should be good now. I hope.

Still haven't seen activity

Still looking for feedback. Thanks.

Ok so I had to uncomment the external and internal ip address in the config file. duh. please let me know if you can log in to the server now. Thanks.

Mine are commented out but i connect threw eqemu loginserver.

How are you connecting to it?

Using a computer on my network

duplicate post sorry

i also forwarded the UDP ports for all of the ports used.

Quote:

Originally Posted by ghanja (Post 239628)

<?xml version="1.0">
<server>
<world>

<shortname>cannons_fury</shortname>
<longname>!!!Cannons Fury {Custom Solo NPC Buffs] Test Buff</longname>


<address>24.209.54.146</address>
<localaddress>192.168.0.10</localaddress>


<loginserver>
<host>login.eqemulator.net</host>
<port>5998</port>
<account>cannon</account>
<password>mypassword</password>
</loginserver>



<tcp ip="127.0.0.1" port="9000" telnet="enable"/>


<key>longrandomkey12345lifelessf</key>



<http port="9080" enabled="true" mimefile="mime.types" />
</world>


<chatserver>


<host>192.168.10</host>
<port>10234</port>
</chatserver>


<mailserver>


<host>192.168.0.10</host>
<port>10234</port>
</mailserver>

<zones>

<defaultstatus>0</defaultstatus>



<ports low="7000" high="7400"/>
</zones>


<database>





<host>127.0.0.1</host>
<port>3306</port>
<username>root</username>
<password>mypassword</password>
<db>cannondatabase</db>
</database>

<qsdatabase>





<host>127.0.0.1</host>
<port>3306</port>
<username>root</username>
<password>mypassword</password>
<db>cannondatabase</db>
</qsdatabase>


<launcher>





</launcher>


<files>




</files>

<directories>



</directories>
</server>

Code:

<!-- DO NOT EDIT ANY LINES BETWEEN HERE AND THE DATABASE SECTION -->

<!-- <address>24.209.54.146</address>

<!-- <localaddress>192.168.0.10</localaddress>

Unless you have some VLAN, involved routing, etc. going on, the above should probably stay commented.

Though, that brings me to the second part of my question from above. What are you working behind? (router, L3 switch, firewall, what?)

Quote:

Originally Posted by ghanja (Post 239646)

Code:

<!-- DO NOT EDIT ANY LINES BETWEEN HERE AND THE DATABASE SECTION -->

<!-- <address>24.209.54.146</address>

<!-- <localaddress>192.168.0.10</localaddress>

Belkin modem/router i can still log in from my network but no one outside my network can login. Is there a place somewhere my external IP address has to be?

comment the address and local address out, and from the looks of it the server has 7 users online atm.

The seven online were all on my network. can you log in to my server? I have to assume that somewhere in the config file has to be my external IP address for this to work right?