trouble setting up local server
 

ok first i have a 1gig, 512ram, winME

ok i can connect to the world servers so i have the right patches.
i would like a network server. So i have read and read about the local setups.

i do not get any errors in the minilog to the world except the everquest time error, and no errors in the boot 5zones.

ok this is what i have.

LoginServer.ini read.
MiniLoginAccounts.ini read.
Server mode: Standalone
Login server listening on port:5999

Using database 'eq' at localhost
EQEMu 0.4.1 Spekkio
Loading zone names & items...
EMuShareMem.dll loaded.
Loading items from database...
...done.
LoginServer.ini read.
Loading guild ranks...done.
Loading EQ time of day...Reading time file failed, bytes read: 0
failed.
Breaking bards...done
World server listening on: port 9000
Connected to LoginServer: localhost:5999



C:\EQEmu>REM: ****Read this first!!!****

C:\EQEmu>
C:\EQEmu>REM: This file requires your real IP in the place of "YourIP" when you
are connecting

C:\EQEmu>REM: To the EQEmu Loginserver.

C:\EQEmu>
C:\EQEmu>REM: When you are using minilogin, Replace all IP Addresses to say 127.
0.0.1

C:\EQEmu>
C:\EQEmu>REM: If you still get errors try using localhost instead of 127.0.0.1

C:\EQEmu>
C:\EQEmu>REM:--------------Start-----------------------


Using database 'eq' at localhost
EQEMu 0.4.1 Spekkio
Loading zone names, items & NPCs...
EMuShareMem.dll loaded.
Loading NPCTypes from database...
...done.
Loading Doors from database...
done.
If this is the last message you see, you forgot to move spells_en.txt from your
EQ dir to this dir.
Spells loaded.
Loading guild ranks...done.
Loading faction data...done.
Connected to worldserver: 127.0.0.1:9000
Entering sleep mode


ok then i have five zones that open.

ad u can see there is no errors. now i open on the same pc as the server is running, and go to the eq station name and password type in eqemu,eqemu and it says invalid station and password, or
if i us and pc connected to the lan or network and go to the station signin, i get server not able to connect or busy.

im at lost. i have read and read not much out there on this subject. i have also flaged useeing the dos command. i have gone to the minilogin accounts and changed it too,

# Max 200 lines total (including comments and blank lines)
# Blank lines may mess up the line # reported in error messages
192.168.0.1 Admin AdminPass
192.168.0.2 User1 eqemu1eqemu
192.168.0.3 User2 User2Pass




so please could i get some help and thanks