ok, then what you need to do is to set your maxlevel settings in the spell lists in the database. The PeQ Editor makes this easy to do.
I'll use pets as an example.
Pet Level 1 Set minlevel to 1 maxlevel to 4
Pet Level 5 Set minlevel to 5 maxlevel to 9
Pet Level 10 Set minlevel to 10 maxlevel to 12
Pet Level 13 Set minlevel to 13 maxlevel to 14
Pet Levek 15 and so on.
I hope that conveys what I mean. You see that the Level 1 pet will load up to level 4. Once you are at Level 5, Pet level 5 will load until you hit level 10, then Pet Level 10 takes over and so on.. The Pet Level 1 and 5 wil not load in the spellset when you are at level 10. You have to choose which spells should load at you level by adjusting the maxlevel setting in the datbase.
__________________
Random Segments of Code....
|