Thread: Westell 6100
View Single Post
  #3  
Old 04-14-2008, 08:00 PM
trevius's Avatar
trevius
Developer
 
Join Date: Aug 2006
Location: USA
Posts: 5,946
Default

DHCP doesn't work the way you are talking about it. You cannot "push" the ISP provided IP through to your router if the modem has a router built into it. However, you can disable DHCP on the modem/router (if it is allowed) and assign a static IP for your router. Then you simply need to setup port range forwarding on both devices. The modem/router will be set to forward all traffic for ports 9000 and 7000 - 7100 to the static IP address you set for your router. Then the router will be set to foward those same ports onto your server PC. A little sloppy to say the least, but it should work just fine.

Also, this isn't a support forum, so you probably won't get many replies here lol. Good luck with getting that setup to work properly.
__________________
Trevazar/Trevius Owner of: Storm Haven
Everquest Emulator FAQ (Frequently Asked Questions) - Read It!
Reply With Quote