fine fine.
Here's a more complete version. Needs quite a few tweaking here or there, but it is working on my test box. Got to clean up some random junk, trying to make it easy to plug into other situations.. Not sure I'll mess around with this more later or not. But, Enjoy~
Yeah, I need to use some qglobals and not rely on local vars so much since they can be pretty icky, but for all intent and purposes this seems to work decently well!
Code:
#Written by Shin Noir, with intent of being used on /crystal/Derron_Coldmist.pl
sub EVENT_SAY {
$towerid = 121026; #Guard Evercold
#tower location spawn points.
$dname = "defender";
$aname = "orc";
@towerx = ( 200.4, 221.8, 198.8, 210.1, 220.7, 192.9, 215.2, 203.1, 191.3, 214.3);
@towery = (-226.7, -227.5, -246.5, -245.2, -246.5, -259.9, -263.6, -299.6, -279.4 -275.6);
@towerz = (-382.7, -382.7, -382.7, -380.2, -382.7, -382.7, -382.7, -382.7, -382.7, -382.7);
@towerh = ( 27.3, 0, 19.6, 8.8, 254.8, 18.6, 1.9, 7.0, 15.1, 0);
@creeploc = (229.3, -73.7, -376.7, 131.8); #This could be split up like tower is.
if (!defined $bounty) { $bounty = 0; }
if (!defined $killcount) { $killcount = 0; }
$wavedelay = 5; #seconds between each wave.
$towercost = 3; #How many creeps does it cost to buy a tower?
if ($text=~/hail/i) {
if (!defined $wave) {
quest::say("Are you [ready] to begin?");
} else {
quest::say("It has already begun.");
}
}
if ($text=~/ready/i) {
if (!defined $wave) {
$bounty = 0; #Reset Bounty
$wave = 1; #Reset Wave
$killcount = 0;
@tower = {0,0,0,0,0,0,0,0,0,0 }; #reset defenders.
quest::say("I hear them incoming...");
quest::settimer(1, $wavedelay); #Set timer for initial wave, delay 5 secs.
} else {
quest::say("It has already begun.");
}
}
if ($text=~/bounty/i) {
if (!defined $wave) {
quest::say("You haven't started yet.");
} else {
quest::say("Your current bounty is $bounty, with $killcount total kills.")
}
}
if ($text=~/left/i) {
quest::say("I would guess there's about ".scalar @creeps." left..");
}
if ($text=~/$dname/i) {
#Figure out who goes next!
#this is a routine where I essentially have an array, @tower, that stors each tower mob.
#It goes through each tower, seeing if they're still alive, and if not, replaces their
#spot with fresh tower.
if ($bounty > $towercost) {
for ($i = 1; $i < 11; $i++) {
if (!defined($tower[$i]) || !defined( $entity_list->GetMobID($tower[$i]))) {
$tower[$i] = quest::spawn2($towerid, 0, 0, $towerx[$i-1], $towery[$i-1], $towerz[$i-1], $towerh[$i-1]);
quest::say("Tower #$i reporting!"); #$tower[$i]
$entity_list->GetMobID($tower[$i])->Stun(2.0); #Stun new tower for 2 seconds.
$bounty = $bounty - $towercost;
return;
}
}
quest::say("No spots available.");
return;
} else {
quest::say("You need at least $towercost bounty points to buy a $dname, you only have $bounty.");
}
}
}
sub EVENT_TIMER {
#116024: Scout, 116007: Centurion, 116172: Legionarre, 116011: Elite
@creepid = (116024, 116024, 116007, 116007, 116172, 116172, 116011, 116011);
@creepamt = (1, 3, 2, 4, 1, 3, 1, 3);
if ($timer eq "1") { #Initial Message.
if (!defined $wavedelay) { #sanity check
quest::stoptimer(1);
quest::say("Event ended prematurely (GM Intervention?)");
return;
}
quest::say("They're here! (Wave $wave)");
quest::settimer(2, 2); #2 second delay until upkeep check
quest::stoptimer(1); #kill this timer.
if (!defined(@creeploc)) { my @creeploc = (200.4, -226.7, -382.7, 27.3); } #This could be split up like tower is.
undef(@creeps);
if (!defined $creepamt[$wave-1]) { #end of creeps!
quest::say("You have won! You ended up with $bounty bounty and $killcount total kills!");
$bounty = 0; #Reset Bounty
undef($wave); #Reset Wave
$bounty = 0;
$killcount = 0;
quest::stoptimer(1);
}
for ($i =0; $i < $creepamt[$wave-1]; $i++) {
#quest::say("$creepid");
$creeps[$i] = quest::spawn2($creepid[$wave-1], 0, 0, $creeploc[0], $creeploc[1], $creeploc[2], $creeploc[3]); #Keep their entity ID.
$entity_list->GetMobID($creeps[$i])->Stun(int(rand(5)));
$entity_list->GetMobID($creeps[$i])->AddToHateList($npc, 1,0); #make them hate Derron.
}
quest::say("Looks to be about ".$creepamt[$wave-1]." ".$entity_list->GetMobID($creeps[0])->GetCleanName. (($creepamt[$wave-1]>1) ? "s" : ""));
}
if ($timer eq "2") { #Upkeep
if (!defined $wavedelay) { #sanity check
quest::stoptimer(2);
quest::say("Event ended prematurely (GM Intervention?)");
return;
}
#quest::say(scalar @creeps);
my $oldbounty = 0;
for ($i = 0; $i < scalar @creeps; $i++) { #Creep check!
if (defined $creeps[$i]) { #I find this a silly check but scalar size is wierd.
if (!defined $entity_list->GetMobID($creeps[$i])) {
delete $creeps[$i]; #Clean up dead mobs.
$bounty++;
$oldbounty++;
$killcount++;
}
}
}
if ($oldbounty) {
#quest::say("You killed an $aname, putting your total to $bounty!");
}
#quest::say(scalar @creeps);
if (scalar @creeps < 1) { #no more creeps
quest::stoptimer(2); #kill this timer
$wave = $wave+1; #Next wave!
quest::settimer(1, $wavedelay); #delay until next wave
quest::say("You have finished off the wave! You have $bounty unspent bounty points. $wavedelay seconds until the next attack...");
}
}
}
sub EVENT_SIGNAL {
#quest::ze(15, "Orc Dead Rec'd.");
if (!defined($orcslays)) {
$orcslays = 0;
}
$orcslays++;
$orcmoney++;
quest::say("$orcslays orcs have been killed!");
}