Quote:
Originally Posted by Uleat
Using rev2133 should be fine. I'm on 2135 myself. Yes, just follow the instructions on that link and it should work. My reference to the 2098 and 1735 was only for the EQEmuLoginServer. Only after changing the two configuration files should you look at replacing your login server files if it still doesn't work. Usually it will let you log in and not show any servers on the server page.
I followed Huppy's myself and had the same problems you're running into. Some of it is outdated and some is a bit quirky. As long as you installed all of the support software it should work when properly configured. Don't forget to clear out the port forwarding settings if you're not hosting a public server.
I should be online for another hour or so..let me know if you're still having problems.
|
Ok I appreciate it. I copied in the 5 files you mentioned into my Eqemu folder:
EQEmuLoginServer.exe
EQEmuAuthCrypto.dll
login.ini
login_opcodes.conf
login_opcodes_sod.conf
I then made the changes you mentioned below that (in the eqemu_config.xml, etc). Next I changed my eqhost.txt to 5998 like you mentioned.
When I got to the bottom part of your other post where you mention "tblserveradminregistration" under the peq section of through Navicat, I don't see that. I'm wondering if I'm missing some files and should start over lol.
Looking back at Huppy's post, I don't see that mentioned. Perhaps that's why I missed something. I'm pretty pc savy, however I do admit that I'm a little ignorant with databases, etc. I tried to take everything step by step, but I'm wondering if I missed something because he took for granted that it was so simple he didn't mention.
Anyway, do you think I should start over? if so, what guide should I follow for a single player server?
EDIT: I'm going to head to bed. I'll butt heads with this again tomorrow. If you can give me any words of wisdom,Uleat, I'll certainly heed them! I'll try again tomorrow and see what I can come up with. Thanks again for your help.