SOD client and MiniLogin "login" solution
For those of us still using MINILOGIN a modification is needed in order for the "Seeds Of Destruction" client and MiniLogin to "login" properly with the SOD client. Updated login opcodes are needed as follows:
- You must modify the contents of your 'opcodes.conf' file in your EQEmu server startup directory. - Modify the contents of the file 'opcodes.conf' 1) Staring at around line 454 of the file 'opcodes.conf' (use the program NOTEPAD++ to get the line numbers) http://notepad-plus.sourceforge.net/uk/site.htm 2) [b]Replace the following lines: Code:
#Login opcodes Code:
#EQEmu Public Login Server OPCodes These updated "Seeds of Destruction" client login opcodes can be found in your SVN directory in the file: EQEmuLoginServer/login_util/login_opcodes_sod.conf NOTES: - Be sure to backup your original 'opcodes.conf' file in case you want to switch back to the "Titanium" or "Secrets of Faydwer" client as the login opcodes for those clients differ from those of the "Seeds of Destruction" client when using MiniLogin. |
This isn't working for me.
I got minilogin setup and my server is talking to it ("1 server(s), 0 client(s) connected") I try to login with SoD client (downloaded from steam), minilogin shows a client trying to connect ("new client from 127....". and "1client(s) connected") but then the client just hangs there at "logging into server, please wait". Pretty sure I did everything right, followed this guide http://www.eqemulator.net/wiki/wikka.php?wakka=Windows and made the change listed above... no dice! I'm on Win7 with firewall disabled (behind routers). Here's my config files... (minilogin\Loginserver.ini)--- Code:
### --- This file tells world.exe what loginserver to connect to. eqemu\eqemu_config.xml-- Code:
<?xml version="1.0"?> and I put those opcodes in 'opcodes.conf' |
change StandAlone to MiniLogin
http://www.eqemulator.org/forums/sho...3&postcount=14 |
I did try that but it doesn't make any difference. The server connects to Minilogin just fine either way, and the client actually connects, it just never gets past "logging into server.. please wait".
I'lll look thru that other stuff when I get home tonight though. Some of that I'm not sure about.. like "If you have set the status field to GM status (200+) you must also have a matching entry in the gm_ips table" ??? I'm running the server and client (and Minilogin) on the same system, everything is set to localhost/127.xxx |
If that's the case, then it could be something else. What's in your logs? Are you getting client connects in there?
|
i run everthing on the same system too... but I use the actual IP. Please follow the steps in my link and tell me where it fails?
|
In the 'variables' table in your database is your "LoginType" set to the value of "MiniLogin" (without the quotes)?
|
Your config files look almost identical to mine.
However in your 'eqemu_config.xml' you have this section: Code:
<?xml version="1.0"?> Code:
<?xml version="1.0"> |
In my case I was running SOF and emy ver 1316 runs fine. Switching to SOD also does not work. Password rejected after the password entry in the client.
So there's more to running SOD than appears - especially if SOF works great. ...still waiting to get SOD working as well If there's another minilogin - anyone have the compiled version? GeorgeS |
GeorgeS, you can always setup the Open Source Login Server from here if you wanted:
http://code.google.com/p/projecteqemu/downloads/list It isn't too hard to set up and once you do, it works much better than MiniLogin. As far as I know, there is only 1 version of MiniLogin binaries around, so if that isn't working for you for SoD, maybe something else is wrong with it. I haven't tried the changes that Zandig suggested in this thread on for MiniLogin, because I don't use it anymore, just the open source one. |
Quote:
Yes it appears the client can connect. Here's what I look like when I boot Minilogin and the server (sorry for the huge pics..) http://i231.photobucket.com/albums/e.../pa/eqemu1.gif Here's with the client trying to connect (entered name & PW) it just hangs here forever... no error message or anything. Note the "new client from" and shown in the title bar of Minilogin.. still no dice. http://i231.photobucket.com/albums/e.../pa/eqemu2.gif it doesn't matter what name/pw I try (an account I think I setup right in the db, or just total garbage) I never get anything but that screen.. |
Quote:
I really don't think the Steam SoD client works with Minilogin.. at least not the version I have (6.2) |
Quote:
|
Quote:
6. You must have an entry in your database account table for each system on your lanI *think* I did this. I did enter a few mysql commands following the guide.. 7. The account entries must have the IP of the connecting system in the minilogin_ip fieldNot sure what this is... how do I check it? 8. If you have set the status field to GM status (200+) you must also have a matching entry in the gm_ips tableNO clue what this means :grin: I did set the GM status to 250. Again, I don't get any "bad account/password" or any other kind of error messages from the client, it just hangs up forever... It does the same thing when I try to connect to the public Loginserver. When I try to connect to PEQ's loginserver (which is supposed to support SoD) it kicks back immediately with "account/password not found" etc... so I know it works, at least that far.... :/ |
I seem to have a similar problem described here: http://www.eqemulator.org/forums/sho...953#post188953 (Third post, first two for other files and stuff) I've tried everything i could come across but it still does not go past the login screen.. Could anyone please help me out?
|
All times are GMT -4. The time now is 11:52 PM. |
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.