A connection to the server could not be reached *I searched*
I followed the guides very closely. my eqhost file reads exactly as it should, no stray carriage returns or spaces. my eqgame.exe file has the patchme added to the end of it, however, when I startup my shortcut and put in my login credentials it says connecting to server for approximately 10 seconds, then gives me the error in the title, along with telling me to check my internet connection. I am attempting to play on the P99 server, so I also did all the necessary steps for moving that over. The only thing I can think of, is that currently I am stationed in Turkey. and in this country, they have crazy laws and firewalls that prevent a lot of types of network traffic. the only thing I could think of, was maybe using a proxy, but if I don't have to that would be better. also, i can ping www.eqemulator.org and tracert like someone had mentioned in another thread. I looked around for a while trying to find a relevant thread and could find none, any assistance would be greatly appreciated. I'm very interested in trying out this "classic" server.
|
I also tried launching the eqemu with my windows firewall and antivirus both turned off. as well as trying it direct connected to my modem. any ideas whatsoever? I've searched some more, and it doesnt seem any of the solutions thus far have fixed my problem
|
anyone have any ideas? I tried doing some more digging, tried turning off anything that would possibly block any traffic windows firewall/anti-virus/router firewall. then i went in and explicitly allowed traffic from port 5998 in the router. are there any other diagnostic steps I can do to see if i can reach the server? what is the IP of the server itself? I read somewhere to ping eqemu, and i can successfully. but I've run dry of ideas.
ANY help you can give whether it be a link that I havn't found yet, or some troubleshooting help would be greatly appreciated, I would like to experience EQ as it was over a decade ago without having to play on a progression server. thank you |
[loginserver]
host=eqemulator.net:5998 [LoginServer] Host=xp-smitchell:7308 Host1= This is my eqhost file after i try to login. "C:\Program Files (x86)\EQemu\titanium\eqgame.exe" patchme this shortcut "target" Anything else I can do? |
also, my dbg.txt files reads
Starting EverQuest (Build Oct 31 2005 10:33:37) which was recomended to determine if the eqemu was compatible with the client. |
Code:
[loginserver] |
first off, thanks so much for lending a hand! =). I made sure the file had no trailing spaces and deleted all that content you said to delete. there were absolutely no trailing spaces. but when i try to login it still says the error in the title and when I open up my eqhost file, it puts the information in red back in, are there any other reasons it would add that line of info?
|
If the client is writing that information to the file it means that it isn't reading the file properly.
Open your file, delete everything, and paste only this into it. Code:
[LoginServer] |
lexrxst2112 beat me to it. The case indeed is important, I was just testing and if [LoginServer] is not capitalised correctly, the client will write the xpmitchell stuff to eqhost.txt. If Host is not capitalised, the connection will fail with 'a timeout occurred'.
|
haha, wow, that did it. im now connected. I really appreciate the help guys. I guess I didn't realize it could be so simple. thanks again!
|
well, turns out that I couldn't connect still due to a non-related issue regarding a "referenced memory could not be read" error. so i left it alone for the night, the next day, i tried to get on again to see if the error still existed, and it gave me the same connection problem in the title!!! i immediatly checked the eqhost file and it was fine. no added lines. So now im lost again..
EQhost.txt file is [LoginServer] Host=eqemulator.net:5998 the shortcut has patchme after it. My router has the port 5998 traffic allowed through I'm a bit lost now. I tried doing the ping on www.eqemulator.net --> C:\Users\mainPC>ping www.eqemulator.net -l 1400 -t Pinging www.eqemulator.net [67.23.190.71] with 1400 bytes of data: Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=226ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=229ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=226ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=226ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=226ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=226ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=232ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Reply from 67.23.190.71: bytes=1400 time=227ms TTL=55 Ping statistics for 67.23.190.71: Packets: Sent = 20, Received = 20, Lost = 0 (0% loss) am I missing something? I don't think anything changed from yesterday until today. thanks again for any help, thought I had it, but apparently not |
anyone...bueller?
also, is there any other info I can provide to help troubleshoot further? I did my best to put out all info I thought could help. It doesn't make sense to me at all. /sigh |
**SOLVED**
must have been an isssue with network traffic on my end, because i didn't change anything and could log in the next day. |
need help
everytime i try to open up the game it says everquest encountered an error sorry for the inconveniance...i thought i need fresh copy so i downloaded new copy of titanium my eq host says
[LoginServer] Host=eqemulator.net:5998 and my launcher has the patchme after it "C:\Program Files\Sony\EverQuest\eqgame.exe" patchme i dont know what else it could be i also upgraded my ram to thinking maybe it was that and that didnt work either plz help me i used to play it on this computer so i know it should work but dont understand why...anyone have any ideas |
All times are GMT -4. The time now is 12:18 AM. |
Powered by vBulletin®, Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.