Public server connection problem

[KhaN]

Hi,

Im having a "strange" problem. Im running a public server, and im the only one able to log in, other gets booted after char creation when trying to enter world.
I have to say they dont have patched 05.05 and able to connect to other 5.7DR2 servers.
Lets say it, its the first time i try to make a public server, i have no connection problem when running a minilogin server.

Im using 5.7DR2 source posted by Shawn, edited them to resolve char creation and compiled.

LoginServer.ini
[LoginServer]
loginserver=eqlogin1.eqemulator.net
loginserver2=eqlogin2.eqemulator.net
loginserver3=eqlogin3.eqemulator.net
loginport=5997
loginport=5997
loginport=5997
worldname=(EQA) KhaN Build
worldaddress=81.250.35.163
locked=false

[WorldServer]
Defaultstatus=0
Unavailzone=

[LoginConfig]
ServerMode=Standalone
ServerPort=5999
UplinkAddress=
UplinkPort=
UplinkAccount=
UplinkPassword=

[ChatChannelServer]
ChatChannelServer=192.168.0.1
Boot5zones.bat
start zone . 81.250.35.163 7995 192.168.0.1
exit
cls

I have defaulted start location to Greater Faydark. Using this post of Shawn http://www.eqemulator.net/forums/viewtopic.php?t=11847&highlight=start+zone+arena
I have check all tuts i could find, and i cant solve the problem.
Problem is my boot5zones.bat config, or my poor 512k DSL Line ? :/

[KhaN]

3 Words ... I am stupid~
Problem fixed :p

[KhaN]

Well look like im not that stupid.
I have recompile my source, all was working. Clients was able to connect.

My ISP went down, i have to reboot server. I have change server name/IP and guess what ? All but me are LD ... so ?

[Charmy]

I am connected atm am i the only one able to connect? if so... all i did was made sure my eqgame.exe eqmain.dll were both the pre may 05 versions and then i patched in the files on the EQA boards and it worked great for me =).

[Derision]

I am connected atm am i the only one able to connect? if so... all i did was made sure my eqgame.exe eqmain.dll were both the pre may 05 versions and then i patched in the files on the EQA boards and it worked great for me =).

I connected earlier as well ... either the LD people had the wrong patch, or Khan changed something after he posted.