Need a walkthru to start..

[shadowdeamon01]

Hi guys, im completely new to EQemulators and tryin to figure it out for hours hasnt gotten me anywhere. Here is my XML file, trying to run minilogin, if anyone could spot any problems and post here again, id be extremely grateful :smile:

<?xml version="1.0">
<server>
<world>
<shortname>Bobski</shortname>
<longname>Bobski Server</longname>

<!-- Only specify these two if you really think you need to. (read: You don't) -->
<!-- <address>some.server.com</address> -->
<!-- <localaddress>192.168.0.5</localaddress> -->

<!-- Loginserver information. Defaults shown -->
<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account>thebobskiserver</account>
<password>xxxxxx</password>
</loginserver>

<!-- Server status. Default is unlocked -->
<!--<locked/>-->
<!-- <unlocked/> -->

<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<tcp ip="localhost" port="9000" telnet="disable"/>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>

<!-- Enable and set the port for the HTTP service. Defaults are shown -->
<http port="9080" enabled="false" mimefile="mime.types" />
</world>

<!-- Chatserver (channels) information. Defaults shown -->
<chatserver>
<host>channels.eqemulator.net</host>
<port>7778</port>
</chatserver>

<!-- Mailserver (in-game mail) information. Defaults shown -->
<mailserver>
<host>channels.eqemulator.net</host>
<port>7779</port>
</mailserver>

<zones>
<defaultstatus>255</defaultstatus>

<!-- Sets port range for world to use to auto configure zones -->
<ports low="7000" high="7100"/>
</zones>

<!-- Database configuration, replaces db.ini. Defaults shown -->
<database>
<host>localhost</host>
<port>3306</port>
<username>xxxxxxxxxxxxxx</username>
<password>xxxxxx</password>
<db>eq</db>
</database>

<!-- Launcher Configuration -->
<launcher>
<!-- <logprefix>logs/zone-</logprefix> -->
<!-- <logsuffix>.log</logsuffix> -->
<!-- <exe>zone.exe or ./zone</exe> -->
<!-- <timers restart="10000" reterminate="10000"> -->
</launcher>

<!-- File locations. Defaults shown -->
<files>
<!-- <spells>spells_us.txt</spells> -->
<!-- <opcodes>opcodes.conf</opcodes> -->
<!-- <logsettings>log.ini</logsettings> -->
<!-- <eqtime>eqtime.cfg</eqtime> -->
</files>
<!-- Directory locations. Defaults shown -->
<directories>
<!-- <maps>Maps</maps> -->
<!-- <quests>quests</quests> -->
<!-- <plugins>plugins</plugins> -->
</directories>
</server>

Thanks
---------------------
SD

[rojadruid]

for mini login you still need to use the liginserver<sp?>.ini file it does not read the new .xml config file yet.

If that doesn't work check out the wiki.

[sesmar]

You also may wish to look into the DRP Serverpack for 0.6.6 that Cavedude has just finished putting together. You can find it at http://eqemu.sesmar.net

[sdabbs65]

You also may wish to look into the DRP Serverpack for 0.6.6 that Cavedude has just finished putting together. You can find it at http://eqemu.sesmar.net
Great Job with this pack.
I got it to install right off the bat with not one issue.
Im certenly glad there people like you who develop quality
Servop Products.
Thanks Sesmar

[sesmar]

All thanks go to Cavedude on this one. All I have been doing lately is maintaining the website, and playing Oblivion too much. Hopefully I will get off my ass soon and start working on my editor again to finish up some of the great ideas I have been working on.

[cavedude]

Running the website is a great help so you deserve as much thanks as I do. It looks great and who else is going to host the server pack? Also, thanks goes out to Solid11, he writes up the pdf for every build. Adobe products and I don't mix so his help is also greatly appreciated.