Clients unable to connect [Archive]

View Full Version : Clients unable to connect

anubisrwml2

04-04-2009, 11:25 PM

Ok Im starting this thread because I have tried everything I could find in here to get my server to allow for connections. I have forwarded all the ports and then some, even setup DMZ and that didnt work either. So I tried the router fix option (no-ip) and that didnt work either. My cable modem doesn't have a firewall option so I dont think its acting as a router (I tried to turn my router from gateway to router and everything stopped working)

Im at a complete loss so here's my config as it stands now. Ive *** out the things that I thought weren't important and personal to my server.

<?xml version="1.0">
<server>
<world>
<shortname>eqorig</shortname>
<longname>

Randymarsh9

04-15-2009, 04:38 PM

My problem isn't related to this, but I didn't want to start another thread. I also am not getting connections to my server, but I think it is the ports. I checked and port 9000 is open, but then the 7000+ are closed for some reason. I looked and they should be open.

Randymarsh9

04-15-2009, 05:57 PM

Does anyone know why the zone ports are closed and yet 9000 is open?

trevius

04-15-2009, 11:18 PM

Where are you getting the info that some are closed and some are open lol? Look in your router config and you can set them however you want them. Make sure you are using Port RANGE Forwarding and not just Port Forwarding as they are not the same thing.

Please explain how you are telling what ports are working and which ones aren't. Also, maybe reading the FAQ in my sig can be of some assistance to you.

Randymarsh9

04-16-2009, 12:05 AM

Ok I set my virtual servers to be 9000 UDP and TCP, then 7000-7025 both. Then when I run my server, I go to http://www.yougetsignal.com/tools/open-ports/ and check to see if they are open. It says that 9000 is open then anything 7000+ is closed. I think it is a port problem, because when I set up my first server I had the same problem with people not connecting before I set up my ports correctly. And also my router automatically does ranges. Like it will be two boxes so for 9000 you do 9000-9000 and then 7000-7025.

Randymarsh9

04-16-2009, 05:29 PM

This is my config

<?xml version="1.0"?>
<server>
<world>
<shortname>Pelican</shortname>
<longname>Pelican's Solo Server (3x exp/AA, Tradeskill merchants)</longname>


<address>pelican.no-ip.biz</address>
<localaddress>192.168.2.5</localaddress>


<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver>


<key>make up some random string of characters here</key>


<http port="9080" enable="true" mimefile="mime.types"/>
</world>


<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>****</password>
<db>newserver</db>
</database>
</server>

Looking at

<http port="9080" enable="true" mimefile="mime.types"/>
</world>
would that mean I need to open port 9080 as well, even though I never did on Pelican's Paradise?

trevius

04-16-2009, 06:55 PM

You only need to open 9080 if you want to use the web page tools. It is handy, but not required. You have it enabled in your config, so you might as well open the port for it. You can then get logged into it by setting a password for your GM account in the accounts table password field. Then, go to:

http://localhost:9080

And log in with your GM account name and the password you set in the accounts table. It is definitely worth checking out.

As for your server config, I see you configured this section:


<address>pelican.no-ip.biz</address>
<localaddress>192.168.2.5</localaddress>

If you are setting up a public server, you almost always want to leave that section commented out like this:





Otherwise, you will have weird connection issues like you are reporting.

Randymarsh9

04-16-2009, 09:05 PM

Trevius, you're a genius. Thanks