GLGanjika
07-14-2012, 11:08 PM
I have been working hard since my last post and have worked out how to get a working zone together and in game (by replacing the "Load2" zone), My only snag now (in terms of custom zones) is getting custom zones to work without replacing a standard zone.
Zoneproxy not working properly when I load it, I will supply my logs below as well as some screenshots. When I start it (am i supposed to start the one in with the client or the one i initially downloaded which resides with its source folder/etc?) it pops up with the text displayed in the picture below (figure a) already dispalyed - according to the logs the zone is actually being replaced and i do see some files appearing and then dissapearing (at start and then stop) but aside from that when i try to zone into a custom zone (including the example ones including) it either A) crashes my computer then i have to move the char. i tried to #zone ___ into the new zone with out via navicat since they are stuck in "unknown zone" or B) it just says "zone unavaiable".
http://i1127.photobucket.com/albums/l632/EsoGuildPB/zoneproythisisalliget.png
[above: Figure A]
(one sec - about to post logs now - will be up in matter of seconds)
Zoneproxy.txt
Backing up alias zone
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_obj.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.txt
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sndbnk.eff
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sounds.eff
ZoneProxy listening on port: 8800
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_obj.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.txt
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sndbnk.eff
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sounds.eff
Shutting down...
Shutting down client sockets.
Client sockets shut down.
Listening port shut down.
zoneproxy.ini
[GENERAL]
ALIASZONENAME=load
ARCHIVEEXTENSION=.s3d
LISTENPORT=8800
---------------------
BELOW: the first zone i ever made from scratch (for the most part,
the meshes came with openzone but the zone itself i made.) - Just trying to figure out
how to get zoneproxy working properly as well as how to fully rename the zone itself (long AND short name - so it
shows the name at the center of the screen when its loading),
http://i1127.photobucket.com/albums/l632/EsoGuildPB/esoeqfuturezones7.png
http://i1127.photobucket.com/albums/l632/EsoGuildPB/customzone1.png
http://i1127.photobucket.com/albums/l632/EsoGuildPB/custom3.png
Zoneproxy not working properly when I load it, I will supply my logs below as well as some screenshots. When I start it (am i supposed to start the one in with the client or the one i initially downloaded which resides with its source folder/etc?) it pops up with the text displayed in the picture below (figure a) already dispalyed - according to the logs the zone is actually being replaced and i do see some files appearing and then dissapearing (at start and then stop) but aside from that when i try to zone into a custom zone (including the example ones including) it either A) crashes my computer then i have to move the char. i tried to #zone ___ into the new zone with out via navicat since they are stuck in "unknown zone" or B) it just says "zone unavaiable".
http://i1127.photobucket.com/albums/l632/EsoGuildPB/zoneproythisisalliget.png
[above: Figure A]
(one sec - about to post logs now - will be up in matter of seconds)
Zoneproxy.txt
Backing up alias zone
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_obj.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.txt
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sndbnk.eff
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sounds.eff
ZoneProxy listening on port: 8800
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_obj.s3d
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_chr.txt
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sndbnk.eff
Restoring C:\Users\Ganjika\Desktop\Create\Administrate\World Creation, Building and Editing\ZoneProxy\_sounds.eff
Shutting down...
Shutting down client sockets.
Client sockets shut down.
Listening port shut down.
zoneproxy.ini
[GENERAL]
ALIASZONENAME=load
ARCHIVEEXTENSION=.s3d
LISTENPORT=8800
---------------------
BELOW: the first zone i ever made from scratch (for the most part,
the meshes came with openzone but the zone itself i made.) - Just trying to figure out
how to get zoneproxy working properly as well as how to fully rename the zone itself (long AND short name - so it
shows the name at the center of the screen when its loading),
http://i1127.photobucket.com/albums/l632/EsoGuildPB/esoeqfuturezones7.png
http://i1127.photobucket.com/albums/l632/EsoGuildPB/customzone1.png
http://i1127.photobucket.com/albums/l632/EsoGuildPB/custom3.png