View Full Version : Login Server question
Hi guys,
Could you please let me know can I setup the server have private and public login (via EQEMU login) at the same time?
jpyou127
11-05-2015, 09:59 AM
Here you go fo your eqemu_config.xml
<!-- Loginserver information. Defaults shown -->
<loginserver1>
<host>eqemu.loginserverurl.com</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver1>
<loginserver2>
<host>your.eqemuloginserver.com</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver2>
Celestial
Thx guys, I have already make as your comment and it looks work well.
But after login and select the server it will stopped and few second will return to login screen.
And i have check the server, the world.exe looks haven't any action...
Could anyone can teach me out?
Please see attached.
http://i64.tinypic.com/vdk5fl.jpg
Sublin
11-06-2015, 09:50 AM
I had the same error message, ended up being an error in my eqemu_config file. Post yours without passwords and someone might be able to see where the error is. For me it was I hadn't uncommented the server info for a local server
jpyou127
11-06-2015, 11:16 AM
Yep, post your config file, its probably a setting in there.
Celestial
Thx guys! below are the quote.
------eqemu_config.xml------
<?xml version="1.0"?>
<server>
<world>
<shortname>KenZW</shortname>
<longname>KenZ World Testing</longname>
<!-- Only specify these two if you really think you need to. (read: You don't) -->
<!-- <address>some.server.com</address> -->
<!-- <localaddress>192.168.0.5</localaddress> -->
<!-- Loginserver information. Defaults shown -->
<loginserver1>
<host>login.eqemulator.net</host>
<port>5998</port>
<account>EQEMU WORLD LOGIN</account>
<password>EQEMU WORLD PASSWORD</password>
</loginserver1>
<loginserver2>
<host>127.0.0.1</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver2>
<!-- Server status. Default is unlocked -->
<!--<locked/>-->
<!-- <unlocked/> -->
<!-- Sets the ip/port for the tcp connections. Both zones and console (if enabled). Defaults are shown -->
<tcp ip="127.0.0.1" port="9000" telnet="disable"/>
<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>
<!-- Enable and set the port for the HTTP service. Defaults are shown -->
<http port="9080" enabled="false" mimefile="mime.types" />
</world>
<!-- Chatserver (channels) information. Defaults shown -->
<chatserver>
<host>MY WAN DNS</host>
<port>7778</port>
</chatserver>
<!-- Mailserver (in-game mail) information. Defaults shown -->
<mailserver>
<host>MY WAN DNS</host>
<port>7778</port>
</mailserver>
<zones>
<defaultstatus>20</defaultstatus>
<!-- Sets port range for world to use to auto configure zones -->
<ports low="7000" high="7500"/>
</zones>
<!-- Database configuration, replaces db.ini. Defaults shown -->
<database>
<host>127.0.0.1</host>
<port>3306</port>
<username>MYSQL ROOT</username>
<password>MYSQLPASSWORD</password>
<db>peq</db>
</database>
<qsdatabase>
<host>127.0.0.1</host>
<port>3306</port>
<username>MYSQL ROOT</username>
<password>MYSQL PASSWORD</password>
<db>peq</db>
</qsdatabase>
<!-- Launcher Configuration -->
<launcher>
<!-- <logprefix>logs/zone-</logprefix> -->
<!-- <logsuffix>.log</logsuffix> -->
<!-- <exe>zone.exe or ./zone</exe> -->
<!-- <timers restart="10000" reterminate="10000"> -->
</launcher>
<!-- File locations. Defaults shown -->
<files>
<!-- <spells>spells_us.txt</spells> -->
<!-- <opcodes>opcodes.conf</opcodes> -->
<!-- <logsettings>log.ini</logsettings> -->
<!-- <eqtime>eqtime.cfg</eqtime> -->
</files>
<!-- Directory locations. Defaults shown -->
<directories>
<!-- <maps>Maps</maps> -->
<!-- <quests>quests</quests> -->
<!-- <plugins>plugins</plugins> -->
</directories>
</server>
----- end eqemu_config.xml ------
Sublin
11-11-2015, 10:33 AM
Anyone have idea? =(
<!-- Only specify these two if you really think you need to. (read: You don't) -->
<!-- <address>some.server.com</address> -->
<!-- <localaddress>192.168.0.5</localaddress> -->
Try changing this to
<!-- Only specify these two if you really think you need to. (read: You don't) -->
<address>your servers internal ip</address>
<localaddress>your servers internal ip</localaddress>
Uleat
11-11-2015, 03:44 PM
I know this is wrong..but, I'm not sure what to change it to:
<loginserver2>
<host>127.0.0.1</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver2>
Perhaps:
<loginserver2>
<host>MY WAN DNS</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver2>
provocating
11-11-2015, 10:09 PM
Lets take a few steps back. First, does your server appear on the public login server? Also, now does it appear on your private login server?
Thank you Sublin!
It works now, could you please let me know what is that part meaning?
To Uleat,
I would like to connect Public and Pirate at the same time, since some friend don't want to create the EQEMU account for LS system, then I will create account locally skip the hard part from EQEMU.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.