Oops I broke Nektulos..

[jsr]

I was editing zone points in Nektulos, I zoned out, zoned in, changed a co-ordinate, #reloadzps.... and suddently no zone points are working in the zone. It's as if there are no zone points.

I reset server and client, same problem.
I deleted all of the nektulos zone points from the DB and reloaded them from PEQ, same problem.
I tried a fresh client install, same problem.

Anyone come across this before?

[Huppy]

I'm sure sure your aware there are 2 versions of nektulos in the zone table, (old and new) - ID 439 (version 1) ID 246 (version 0) The following is something you can either use to restore, or use for reference:

(This is assuming these zone_points exist in your DB)

These are all the default zone_points going OUT of Nektulos


UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 1, `number` = 20, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = -386, `target_x` = -133, `target_z` = -64, `target_heading` = 145, `zoneinst` = 0, `target_zone_id` = 365, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1477;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 1, `number` = 10, `y` = 2325, `x` = 740, `z` = 56, `heading` = 0, `target_y` = 118, `target_x` = -18, `target_z` = -62, `target_heading` = 506, `zoneinst` = 0, `target_zone_id` = 27, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1476;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 1, `number` = 30, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = 1355, `target_x` = 798, `target_z` = -18, `target_heading` = 87, `zoneinst` = 0, `target_zone_id` = 22, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 31 WHERE `id` = 1478;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 1, `number` = 77, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = -841, `target_x` = 132, `target_z` = -157, `target_heading` = 257, `zoneinst` = 0, `target_zone_id` = 202, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1480;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 1, `number` = 30, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = 1292, `target_x` = -2480, `target_z` = 78, `target_heading` = 101.5, `zoneinst` = 0, `target_zone_id` = 408, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967232 WHERE `id` = 2339;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 1, `number` = 50, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = 53, `target_x` = 154, `target_z` = 28, `target_heading` = 251, `zoneinst` = 0, `target_zone_id` = 40, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1479;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 0, `number` = 1, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = 53, `target_x` = 154, `target_z` = 28, `target_heading` = 130, `zoneinst` = 0, `target_zone_id` = 40, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967295 WHERE `id` = 1444;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 0, `number` = 2, `y` = -2702, `x` = -654, `z` = -18, `heading` = 0, `target_y` = 1549, `target_x` = 627, `target_z` = -20, `target_heading` = 110, `zoneinst` = 0, `target_zone_id` = 22, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967295 WHERE `id` = 1445;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 0, `number` = 3, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = 81.43, `target_x` = -10.38, `target_z` = -54.94, `target_heading` = 0, `zoneinst` = 0, `target_zone_id` = 27, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967295 WHERE `id` = 1446;
UPDATE `zone_points` SET `zone` = 'nektulos', `version` = 0, `number` = 77, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = -841, `target_x` = 132, `target_z` = -157, `target_heading` = 1, `zoneinst` = 0, `target_zone_id` = 202, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967295 WHERE `id` = 1447;


These are all the default zone_points going IN to Nektulos:


UPDATE `zone_points` SET `zone` = 'ecommons', `version` = 0, `number` = 4, `y` = 1553, `x` = 641, `z` = -18, `heading` = 0, `target_y` = -2679.36, `target_x` = -514.8, `target_z` = -19.34, `target_heading` = 50, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 3 WHERE `id` = 53;
UPDATE `zone_points` SET `zone` = 'neriaka', `version` = 0, `number` = 3, `y` = 29, `x` = 155, `z` = 30, `heading` = 0, `target_y` = 2299.79, `target_x` = -1108.24, `target_z` = 2.19, `target_heading` = 64, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 3 WHERE `id` = 415;
UPDATE `zone_points` SET `zone` = 'poknowledge', `version` = 0, `number` = 17, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = 705, `target_x` = -349, `target_z` = -4, `target_heading` = 20, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 3 WHERE `id` = 468;
UPDATE `zone_points` SET `zone` = 'lavastorm', `version` = 0, `number` = 0, `y` = 75, `x` = -10, `z` = -53, `heading` = 0, `target_y` = 3107, `target_x` = 289, `target_z` = -17, `target_heading` = 88, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 3 WHERE `id` = 658;
UPDATE `zone_points` SET `zone` = 'corathus', `version` = 0, `number` = 1, `y` = 999999, `x` = 999999, `z` = 999999, `heading` = 999, `target_y` = -697.9, `target_x` = 1271.2, `target_z` = -2.2, `target_heading` = 169.5, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967295 WHERE `id` = 1458;
UPDATE `zone_points` SET `zone` = 'corathus', `version` = 0, `number` = 30, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = -1026, `target_x` = 1187, `target_z` = -11, `target_heading` = 442, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 0, `buffer` = 0, `client_version_mask` = 4294967295 WHERE `id` = 1501;
UPDATE `zone_points` SET `zone` = 'commonlands', `version` = 0, `number` = 20, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = -2192, `target_x` = -419, `target_z` = 2, `target_heading` = 235, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 1, `buffer` = 0, `client_version_mask` = 4294967295 WHERE `id` = 1575;
UPDATE `zone_points` SET `zone` = 'ecommons', `version` = 0, `number` = 4, `y` = 1553, `x` = 641, `z` = -18, `heading` = 0, `target_y` = -2225.7, `target_x` = -466.5, `target_z` = 3.6, `target_heading` = 246.8, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 1, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1585;
UPDATE `zone_points` SET `zone` = 'neriaka', `version` = 0, `number` = 3, `y` = 29, `x` = 155, `z` = 30, `heading` = 0, `target_y` = 1824.4, `target_x` = -977.1, `target_z` = 24.7, `target_heading` = 71.5, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 1, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1586;
UPDATE `zone_points` SET `zone` = 'poknowledge', `version` = 0, `number` = 17, `y` = 0, `x` = 0, `z` = 0, `heading` = 0, `target_y` = -814.6, `target_x` = -833.7, `target_z` = 9.9, `target_heading` = 218.8, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 1, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1587;
UPDATE `zone_points` SET `zone` = 'lavastorm', `version` = 0, `number` = 0, `y` = 75, `x` = -10, `z` = -53, `heading` = 0, `target_y` = 2275.93, `target_x` = 744.19, `target_z` = 38, `target_heading` = 128, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 1, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1588;
UPDATE `zone_points` SET `zone` = 'corathus', `version` = 0, `number` = 1, `y` = 999999, `x` = 999999, `z` = 999999, `heading` = 999, `target_y` = -1053.9, `target_x` = 1193.9, `target_z` = -4.2, `target_heading` = 221.3, `zoneinst` = 0, `target_zone_id` = 25, `target_instance` = 1, `buffer` = 0, `client_version_mask` = 4294967292 WHERE `id` = 1589;

[jsr]

Thanks Huppy,

Resetting the zone points isn't working for some reason. I've reverted to the original zone, which is working, but the underlying issue is a mystery for now.

[Huppy]

I've reverted to the original zone, which is working, but the underlying issue is a mystery for now.

One of my little home projects I am working on, I am using the older classic version of nektulos. It was a little tedious getting all the zone points going in the right direction, but I never encountered the issues you're having. I would be curious though, to find out what caused it, just for future reference, in case someone else runs into the same thing and the info could be passed along.

[Ladrone]

this was super helpful, thank you

[Nightrider84]

Here is my post covering classic Nektulos, towards the bottom is the correct zone points. Also you need to change the client mask to match your expansions ect. Hope this helps ya a bit.

http://www.eqemulator.org/forums/showthread.php?t=39850