PF Usage help

[thepoetwarrior]

I've noticed that my PF Usage is about 200 when not running EQ Server, and goes up to about 400 just after starting the server, and then within 24 hours its over 1 gig. Is this bad? Why does it slowly go up forever until eventually EQ Server needs reboot?

I had EQ Server on an old PC, but now its on a new PC, but same problem. Here is the new specs with same problem:

Windows Server 2003 Enterprise
2.40 Gighz Quadcore
3 Gig Ram
PF Min/Max both set to 4092 on C:
PF Limit: 7 Gig (Ram + PF Max)
Mem Total: 3 Gig
Mem Avail: 2.5 Gig

Im using the Zone Reset Quest on a Timer in popular zones (Thanks Trevius)

http://www.eqemulator.net/forums/showthread.php?t=24871

Peek times have about 70-80 users online.

I've already done tweak for that ConservativePagefile = 1 thing to limit how much the PF is used, among other tweaks.

Is the PF Usage anything to be concerned about since its growing all the time? Any other tweaks I could do? Does the reset quest just leave the reset zones in the PF without clearing it until I shut down the server? Of which by the way, the PF instantly goes back to 200 when I shut down the EQEmu server.

Thanks in advance for expert advise.