Help starting up server correctly.

[Zhaar]

Hello guys,

I am very new to this, and I am not good with computers. But I will try and explain the best I can.


I am trying to start a public server for everyone to log onto, but I am having some issues. My server doesnt seem to accept connections from outside my LAN. But it does show up on the server list, and I can log into fine on my server host computer and on another computer on my LAN.

I have followed the Techguys guide. but some of the things in the guide did not match what came up on my computer, for instance when I run start the guide says I should get 2 lines like this in my second window

DEBUG] [WORLD__LS] Connected to LoginServer: eqemulator.net:5998
[DEBUG] [WORLD__LS] LoginServer provided XX.XXX.XXX.XXX as world address

I only get: DEBUG] [WORLD__LS] Connected to LoginServer: eqemulator.net:5998 and not the second line.

And when I push enter it only loads ports 7000-7004 on world window, and the other window says 0:sleeping.

And for the ports, I am using a Netgear Router. And I followed a guide on how to forward ports on it. I opened ports 7000-7010, 9000-9100, 3306, 5998.
But when I was opening these ports it asked me for service names for the ports, is something special I need to type in there? Anyways I opened these ports on Inbound traffic and adressed to the IP of the computer I am hosting the server on. But I have no idea what the service name should be so I just typed something in.

And I have turned off my Windows firewall, and I have no antivirus/firewall going.

Here is what my xml says.

<?xml version="1.0">
<server>
<world>
<shortname>C</shortname>
<longname>ZTest</longname>

<!-- Only specify these two if you really think you need to. -->
<address>192.168.0.3</address>
<localaddress>127.0.0.1</localaddress>

<!-- Loginserver information. -->
<loginserver>
<host>eqemulator.net</host>
<port>5998</port>
<account></account>
<password></password>
</loginserver>

<!-- Sets the shared key used by zone/launcher to connect to world -->
<key>some long random string</key>

<!-- Enable and set the port for the HTTP service. -->
<http port="9080" enabled="true" mimefile="mime.types" />
</world>

<!-- Database configuration, replaces db.ini. -->
<database>
<host>localhost</host>
<port>3306</port>
<username>root</username>
<password>X.X.X.X</password>
<db>peq</db>
</database>
</server>


When my computer IP is in the Address line the server will only accept connections from the host server itself. and when I change the 127.0.0.1 in the localaddress line to my computer IP 192.168.x.x the server will accept connections from all computers in my LAN but still wont accept connections from outside my LAN.

Anyways I changed the IP back to address:192.168.x.x and localaddress: 172.0.0.1, as it says in the guide. If someone could try and log on for me so I can see if it works now. Server name is ZTest.


I really have no clue what can be wrong, if anyone could help it would be greatly appriciated!