EQEMU v0.6.2, My Experience

[jillmatik]

I can start testing this now.. here's my error code.. what number should i replace in opcodes.conf ??

Received Message SyncWorldTime
Time Broadcast Packet: EQTime [10:26 pm]
[Status] 161941651 New client from ip:ipaddress port:1964
[Status] Weather should change in 6932 seconds
[Error] Unhandled incoming opcode: OP_AnnoyingZoneUnknown (#299, eq=0x0000), size: 8, Client: Test
0: 38 02 00 00 40 00 00 00 | 8...@...
[Error] Unhandled incoming opcode: OP_AnnoyingZoneUnknown (#299, eq=0x0000), size: 8, Client: Test
0: 38 02 00 00 80 00 00 00 | 8.......
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36

Just tried editing the opcodes.conf file with the updated hex number. This was the resulting output:

Received Message SyncWorldTime
Time Broadcast Packet: EQTime [02:28 am]
[Status] 196613 New client from ip:ipaddress port:1997
[Error] Unhandled incoming opcode: OP_Unknown (#0, eq=0x0000), size: 8, Client: Test
0: 3A 02 00 00 40 00 00 00 | :...@...
[Error] Unhandled incoming opcode: OP_Unknown (#0, eq=0x0000), size: 8, Client: Test
0: 3A 02 00 00 80 00 00 00 | :.......
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36
[Error] OP size error: OP_ClientUpdate expected:38 got:36

I agree.. hopefully someone will chime in! Worth a shot though thanks for the work!