Constant Link Deaths-Help!-Linksys Router/DSL/Win2k/Eqemu4.1

[mudman1]

My server is having some problems.

It seems as soon as one person logs in, the other gets Booted. The error code usually is unexpected packet during CLIENT_LOGIN. Everyone basically is loggin in getting disconnecting and relogging in, rinse repeat., or just going link dead period. Should i got to different provider, like cable instead of DSL? or change settings? The following is a complete rundown of my setup. Thanks in advance for the help.

MY SETUP FOLLOWS
------------------------------------------------------------

MYSQL SETUP:
Version 3.23
Grant all privs: on
3.13 Addon spawns sourced
name of database: eqnew
Not been edited with FQAdmin

*note ####.50 is internal IP of server pc.

EQEMU 4.1:
See login.in and boot5zone printout at bottom of post for reference. I am using NO-IP.com for host name slamdef.no-ip.info in both boot5zone and world address.

Hostname Service:
Using No-IP.com: slamdef.no-ip.info
(I have the client to update the IP and have tried with and without this domain name in EQEMU setup with just IP numbers instead)

OS & Hardware:
Win 2k service pack 3, no firewall programs nothing running in the background
PIII, Intel, 512meg ram,GeforceII,Kingston NIC

CONNECTION:
Pacbell ADSL service
Wirespeed modem: current download 1meg, upload 100k

ROUTER:
BEFSR81, most recent firmware flashed

Here is my Router setup maybe someone can tell me if this is the problem I will go through the whole menu and options set.

SET UP MENU
Hostname: blank
Domain name: pacbell.net
Lan IP Address- ###lanip######
Username:#####@pacbell.net
PWD: #####
Keep alive: Checked

DHCP MENU
dhcp:enabled
Start IP address: ##lanip######.100 ( should this be 100? )
Number dhcp users: 50
dns 0 0 0 0 0

ADVANCED SETTINGS
filters: none set
private Mac filt: none set

Block WAN Request : Enable ( I disbled this not sure if it helps)
IP Seccondary pass through: Enable
PPTP pass through: Enable
L2 TP pass through: Enable
Remote access: Disable
Use default MTU: Enable
size of MTU: none specified (1492 default)

FORWARDING
FTP,Telnet,SMTP,DNS,TFTP,Finger,HTTP,POP3,NNTP,SNM P-not

PORT TRIGGERING
none specificified (i tried them with eqemu ranges- same prob.)

VIEW PORT FOWARDING RANGE
Ports for EQEMU specified here as follows
eqemu1, 5999, tcp-yes, protoco udp-yes, ######.50,enabled
eqemu1, 9000, tcp-yes, protoco udp-yes, ######.50,enabled
eqemu1, 7995-7999,tcp-yes, protocol udp,#####.50,enabled

DNAMIC ROUTING
Working mode: Gateway
Dynamic Routing: disable

STATIC ROUTING
none

DMZ HOST
IP ADDRESS: #######.50 (internal ip of host,
+ experimented with this off which blocks any login)

MAC address
#########

THE INTERNAL IP OF HOST:
Kingston NIC settings as follows:
IP Set: #######.50
255.255.255
Gateway: ###lanip####
Primary prefferred DNS: ###lanip######
(also tried with dns of pacbell)



### NOTE:

On client PC where I run EQ i have tried it with the client PC connected through the router with the hosts file on the client edited as follows: 127.0.0.1 localhost

I have also tried with client dissonected from the network and using a standard dialup to make sure it wasn't my client conflicting and host file with 127.0.0.1 localhost removed and rebooted.

I read EVERY post on NAT,IP,forwarding,1017 error, readme, ect, I printed them and followed line by line.

I can not fiquer out what is causing people to be constantly booted from my server. The database has not been customized, there is no strange settings in Win2k nor any firewall ect, its a fresh install of 2k. IF anyone can tell me if my router or whatever is set wrong or suggest inprovements please advise. Thanks in advance.

Mudman
Defender Server


##############
EQEMU setup files:
##############

LOGINSERVER.in
---------------------------------------------------------------------
[LoginServer]
loginserver=eqlogin1.eqemu.net
loginserver2=eqlogin2.eqemu.net
loginport=5999
loginport2=5999
worldname=DEFENDER
worldaddress=slamdef.no-ip.info
locked=false
account=
password=


[WorldServer]
Defaultstatus=10
Unavailzone=

[LoginConfig]
ServerMode=Standalone
ServerPort=5999
UplinkAddress=
UplinkPort=
UplinkAccount=
UplinkPassword=

BOOT5ZONE.EXE
-------------------------------------------------------------------
@echo off
start zone . slamdef.no-ip.info 7995 slamdef.no-ip.info
start zone . slamdef.no-ip.info 7996 slamdef.no-ip.info
start zone . slamdef.no-ip.info 7997 slamdef.no-ip.info
start zone . slamdef.no-ip.info 7998 slamdef.no-ip.info
start zone . slamdef.no-ip.info 7999 slamdef.no-ip.info
exit
cls

addon.in
-------------------------------------------------------------------
[Database]
host=localhost
user=#####
password=######
database=eqnew

[CommandLevels]
$MAXCLIENTS=-1 (or set to 5)
@NPCSPELLS=8
!setaaxp=0,!setaapts=0,!level=0,!damage=100,!heal= 0 ect ect