Create a Server behind a router? I know how :)

[hiddenfear]

I just got a new computer and a hub/router so I can share my DSL connection to the both of them. I read many posts regarding people not being able to use a router/hub while creating a server. I figured it out. This is what I did.

I your loginserver file in the /EQEmu folder.
You should have to following

[LoginServer]
loginserver=eqlogin1.eqemu.net
loginserver2=eqlogin2.eqemu.net
loginport=5999
loginport2=5999
worldname=The Name of Your Server
worldaddress=192.168.1.101
locked=false

In the Worldaddress you should have the IP address that you issued you computer. Not your live net IP address but the adress the computer uses in your LAN, some Routers give this out automadicly. So click start, run command promt/dos and type ipconfig to find out wat your comps LAN ip is. Make sure you put that IP in the worldaddress=

Next, in your boot5zones file, you should have to following


start zone . 192.168.1.101 7995 192.168.1.101
start zone . 192.168.1.101 7996 192.168.1.101
start zone . 192.168.1.101 7997 192.168.1.101
start zone . 192.168.1.101 7998 192.168.1.101
start zone . 192.168.1.101 7999 192.168.1.101
exit
cls

Set the IP adresses to the same IP you put in the worldaddress=
Now you should be set. Thats all you need to change. Now if your router/hub as a firewall it might not let clients in. I`m still working on that.


-Ellusion