0.6.1-DR1 Compatible database

**cavedude** · #1 06-04-2005, 07:10 AM

PEQ has done a lot of work to their database in regards to perfecting spawns and such. I pretty much just spawned everything from logs and only fixed/added entires I knew were wrong or missing. The tables I took from PEQ are minor ones such as starting items.

iamjooish · #2 06-05-2005, 03:02 AM

a few more n00b querstions

So I could mix some of peq's tables with yours and it would stil work?

also...

Code:

INSERT INTO variables VALUES ('LoginType','Public','Set this to Minilogin to login using a minilogin server :)',20050602212938);

it looks like some of you might have to do some editting to the db before you can get it to work. :p

**cavedude** · #3 06-05-2005, 05:18 AM

My database and PEQ's db only have limited compatiblity. Some tables can be exchanged, others can't. If you don't know much about how all the tables interact I suggest leaving them be.

The database is setup for public login by default. If everybody used minilogin, there weren't be any cool servers for people to gether on.

iamjooish · #4 06-06-2005, 03:00 PM

well I can try... >

your tables seem to be more detailed...
a big plus would be to just get Alt. Adv working again.

The minilogin thing was to prevent others from running into the same wall I ran into a dozen times...

update: zone points seem a little DoA... Couldn't Login to cab east with them but PEQ Velious's Zone points worked fine (so I can tell)... just a heads up.

edit again: fixed. somehow dropping zone_points, loading PEQ's table, dropping it, then reloading yours seemed to work.

wooow · #5 07-03-2005, 05:06 AM

I am experiencing a problem with this database. When I tried to log in with minilogin, it gives an error saying:

xxxxxx new client from ip: 127.0.0.1 port: xxxx
Unknown packet: 0: 00 02 00 00 00 00 00 00 - 00 00 00

Anyone knows what's happening? When I switch to the PEQ database everything works well. Any help is greatly appreciated, I want Luclin badly.

(I've sourced PEQ database into EQ, and the 0.6.1-DR1 into EQ2, all I changed was the db.ini file and the EQ2 didn't work. I'm using 0.6.1 EQEmu with pre 5.11 patch)

**cavedude** · #6 07-03-2005, 08:37 AM

Make sure you have an account setup in the database with the client's IP specified.

**cavedude** · #7 07-04-2005, 03:02 AM

For those of you who want the 0.6.0-DR3 version of this database, it can be found bundled with the Server Pack found here: http://eqemulator.net/forums/showthread.php?t=18934