1017; Correctly Patched & Set Up

sdabbs65 · #1 12-13-2005, 12:04 PM

Are you by chance useing a linksys router ?
also the 192 address won;t work... I tried them before it has to be 127.0.0.1

mrea · #2 12-13-2005, 12:08 PM

Yes, I'm behind a linksys. I forwarded the ports so I don't understand what else is wrong.

sdabbs65 · #3 12-13-2005, 12:10 PM

Quote:

Originally Posted by mrea

Yes, I'm behind a linksys. I forwarded the ports so I don't understand what else is wrong.

the 1017 error comes from improper subnet masks. You will want to be careful of multiple network cards in a single machine. Even though one may be set up properly to connect to EMU, the other could be defaulting the subnet mask to 255.0.0.0. You will be able to check your subnet mask
by going to DOS and typeing ipconfig.

sdabbs65 · #4 12-13-2005, 12:12 PM

I have a wireless system in my house I have to disable it and then run bootzones then re-enable it after everything loads for it to work properly...
it drives me nuts with my UO server cuz my broadband connection resets everytime we get a bad rainstorm.

1Boppoom1 · #5 12-22-2005, 07:10 PM

my best bet would be changing the LAN ip on your Boot5zones.bat to your IP so it reads

Code:

start zone . xx.xx.xxx.xxx 7999 xx.xx.xxx.xxx

most servers seem to run with that set without any problems.....

Good Luck!