7.0 Titanium setup for clueless newbs. I'm the guinea pig!

**fathernitwit** · #1 04-21-2006, 12:05 PM

hmm...
it looks like sourceforge's CVS is sucking... the changes have been going into CVS each night, but sourceforge's public CVS servers are not seeing them... The nightly builds are going to be the best place to get source until this is fixed, so long as the code actually builds each night, as it did not last night.

Kirgothi · #2 04-21-2006, 02:36 PM

According to Cavedude, the 3.1 ServerPack installer takes care of the Minilogin installation for you.

So, I think that wraps up the guide for installation.

My server comes up just fine. I still can't seem to connect to it, but that is another issue entirely. Hopefully this thread will help other people get started also.

Thanks a lot to everyone that contributed.

Kirgothi · #3 04-22-2006, 03:40 AM

Well it looks like this isn't over with yet.

I launch the server by clicking on the RunEQEmu shortcut provided by the ServerPack. 3 windows come up, then one closes and another opens. Everything seems to run ok. But, in the eqlaunch.exe window it says the following:

[Debug] Starting Log: logs/eqemu_debug_3172.log
[Debug] [LAUNCHER__INIT] Loading server configuration..
[Debug] [LAUNCHER__INIT] Starting main loop...
[Debug] [NET__WORLD] Connected to World: 127.0.0.1:9000
[Debug] [LAUNCHER__WORLD] World told us to start zone dynamic_01.
[Debug] [LAUNCHER__WORLD] World told us to start zone dynamic_02.
[Debug] [LAUNCHER__WORLD] World told us to start zone dynamic_03.
[Debug] [LAUNCHER__WORLD] World told us to start zone dynamic_04.
[Debug] [LAUNCHER__WORLD] World told us to start zone dynamic_05.
[Debug] [LAUNCHER__ERROR] World told us to start zone dynamic_01, but it is alre
ady running.
[Debug] [LAUNCHER__ERROR] World told us to start zone dynamic_02, but it is alre
ady running.
[Debug] [LAUNCHER__ERROR] World told us to start zone dynamic_03, but it is alre
ady running.
[Debug] [LAUNCHER__ERROR] World told us to start zone dynamic_04, but it is alre
ady running.
[Debug] [LAUNCHER__ERROR] World told us to start zone dynamic_05, but it is alre
ady running.
[Debug] [LAUNCHER__STATUS] Starting zone dynamic_01
[Debug] [LAUNCHER__STATUS] Zone dynamic_01 has been started.
[Debug] [LAUNCHER__STATUS] Waiting 20000 milliseconds before booting the second
zone.
[Debug] [LAUNCHER__STATUS] Starting zone dynamic_02
[Debug] [LAUNCHER__STATUS] Zone dynamic_02 has been started.
[Debug] [LAUNCHER__STATUS] Waiting 2000 milliseconds before booting the next zon
e.
[Debug] [LAUNCHER__STATUS] Starting zone dynamic_03
[Debug] [LAUNCHER__STATUS] Zone dynamic_03 has been started.
[Debug] [LAUNCHER__STATUS] Waiting 2000 milliseconds before booting the next zon
e.
[Debug] [LAUNCHER__STATUS] Starting zone dynamic_04
[Debug] [LAUNCHER__STATUS] Zone dynamic_04 has been started.
[Debug] [LAUNCHER__STATUS] Waiting 2000 milliseconds before booting the next zon
e.
[Debug] [LAUNCHER__STATUS] Starting zone dynamic_05
[Debug] [LAUNCHER__STATUS] Zone dynamic_05 has been started.
[Debug] [LAUNCHER__STATUS] Waiting 2000 milliseconds before booting the next zon
e.

Are the errors in there ok? It seems to launch the zones fine right afterwards?

Anyhow, If I go ahead and click on the RunEverquest shortcut provided by the serverpack, I got as far as the login screen. No matter what I entered, the "Logging into the server. Please wait... " screen would just stay there forever.

I read in another post that copying the contents of the patch_6.2.conf file to the opcodes.conf file will fix this. Both files are in you eqemu folder. This did allow me to get past the login screen.

Now I get to the server selection screen, but there are no servers in the list.

This is what the window titled "1 Server(s), 1 Client(s)" says:

LoginServer.ini read.
[Status] Loading opcodes..
Server mode: MiniLogin
Login server listening on port:5999
5608 New Server connection: 127.0.0.1 port: 4877
0: 4D 79 20 4D 69 6E 69 6C - 6F 67 69 6E 00 00 00 00 | My Minilogin....
16: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
32: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
48: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
64: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
80: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
96: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
112: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
128: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
144: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
160: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
176: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
192: 00 00 00 00 00 00 00 00 - 00 6D 69 6E 69 6C 6F 67 | .........minilog
208: 69 6E 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | in..............
224: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
240: 00 00 00 00 00 00 00 00 - 00 00 00 31 32 37 2E 30 | ...........127.0
256: 2E 30 2E 31 00 00 00 00 - 00 00 00 00 00 00 00 00 | .0.1............
272: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
288: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
304: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
320: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
336: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
352: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
368: 00 00 00 00 00 00 00 00 - 31 32 37 2E 30 2E 30 2E | ........127.0.0.
384: 31 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | 1...............
400: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
416: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
432: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
448: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
464: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
480: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
496: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
512: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
528: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
544: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
560: 00 00 00 30 2E 33 2E 31 - 30 00 00 00 00 00 00 00 | ...0.3.10.......
576: 00 00 00 00 00 00 00 00 - 00 00 00 00 30 2E 37 2E | ............0.7.
592: 30 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | 0...............
608: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
624: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 | ................
640: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 | .............
0: 00 44 CB 00 01 00 00 00 | .D......
0: 00 00 00 00 02 00 00 00 | ........
0: B0 01 36 00 03 00 00 00 | ..6.....
0: 00 50 5F 47 05 00 00 00 | .P_G....
0: 00 00 00 00 04 00 00 00 | ........
0: 00 00 00 00 4D 6F 6E 20 - 41 70 72 20 31 37 20 31 | ....Mon Apr 17 1
16: 35 3A 35 39 3A 31 34 20 - 32 30 30 36 00 01 00 00 | 5:59:14 2006....
32: 00 | .
0: 00 00 00 00 4D 6F 6E 20 - 41 70 72 20 31 37 20 31 | ....Mon Apr 17 1
16: 35 3A 35 39 3A 31 34 20 - 32 30 30 36 00 02 00 00 | 5:59:14 2006....
32: 00 | .
0: 00 00 00 00 4D 6F 6E 20 - 41 70 72 20 31 37 20 31 | ....Mon Apr 17 1
16: 35 3A 35 39 3A 31 34 20 - 32 30 30 36 00 03 00 00 | 5:59:14 2006....
32: 00 | .
0: 00 00 00 00 4D 6F 6E 20 - 41 70 72 20 31 37 20 31 | ....Mon Apr 17 1
16: 35 3A 35 39 3A 31 34 20 - 32 30 30 36 00 05 00 00 | 5:59:14 2006....
32: 00 | .
0: 00 00 00 00 4D 6F 6E 20 - 41 70 72 20 31 37 20 31 | ....Mon Apr 17 1
16: 35 3A 35 39 3A 31 34 20 - 32 30 30 36 00 04 00 00 | 5:59:14 2006....
32: 00 | .
757599 New client from ip: 127.0.0.1 port: 3391

Anyone have info on what the problem is?
Also, what am I supposed to be using for a login and password? Is it mini/mini?
And, do you have to "do" anything to launch minilogin? Or does the run eqemu do that for you?

**cavedude** · #4 04-22-2006, 04:28 AM

Download Server Pack 3.5 it should work out for you. Yeah, user/pass is mini mini

Kirgothi · #5 04-22-2006, 04:36 AM

Does this serverpack include PEQ's database? Or just yours.

Edit: I used the PEQ install. Now I am once again stuck at the "Logging into the server. Please wait... " screen.

Should I recopy the patch_6.2.conf file into the opcodes.conf file?

**cavedude** · #6 04-22-2006, 06:33 AM

3.5 uses both, you can select which one you prefer. Either will be sourced as eq, not emusp3 or peq.

Kirgothi · #7 04-22-2006, 11:31 AM

Well the server still isn't up and running. Here is a recap of what has been done.

1. Installed Everquest Titanium.
2. Checked with EqVercheck as being ok with eqemu7.0
3. Installed MySql from the guide linked to back at the beginning of this thread.
4. Installed Perl from the guide linked to back at the beginning of this thread.
5. Installed Cavedude's Serverpack 3.5
6. Inserted a record into the account table of the eq database with name=mini, password=mini, status=250, and minilogin_ip=127.0.0.1
7. Copied the contents of patch_6.2.conf into opcodes.conf

At this point the client gets to the server selection screen and there are no servers in the list.

I used the mysql control center to insert the record into the account table.

Did I miss a step somewhere? Is there something else that needs to be done?
Kir

Belfedia · #8 04-23-2006, 07:54 PM

Quote:

Originally Posted by fathernitwit

hmm...
it looks like sourceforge's CVS is sucking... the changes have been going into CVS each night, but sourceforge's public CVS servers are not seeing them... The nightly builds are going to be the best place to get source until this is fixed, so long as the code actually builds each night, as it did not last night.

I hope Cvs come back quick, that very strange i know other project don't have any problem about it. Perhaps a special bug with eqemu ? I dislike nightly build, i don't have same files than cvs (some are missing), cvs branch Development is more complete

for use with my debian linux install. Are you know SVN ? perhaps it was a good idea for replace CVS ?

jimbabwe · #9 04-24-2006, 02:58 AM

cosmanja: Don't worry, that's all the output you should get whenyou boot world if you used the installer.

cosmanja · #10 04-24-2006, 04:48 AM

Ok if thats the case my next issue is not seeing it on the server list when i go to log in.

jimbabwe · #11 04-24-2006, 05:57 AM

are you behind a router?

cosmanja · #12 04-24-2006, 08:09 AM

Nope, I did find out from CaveMans site that Mysql V4.0.10 works so i'm going to download that and try it.

Maybe wrong version of Mysql

klinzhai · #13 04-24-2006, 09:31 AM

I'm running 4.0.26 and have uninstalled and reinstalled several times without issues recently (to get different databases and testing). The MySQL project was pretty much "Add in features, fix bugs", so the only differences between 4.0.10 and 4.0.26 should be mostly bugfixes (fixing broken features also). If you get it working with 4.0.10, then you should be able to get it working using the exact same process with 4.0.26 (or most any other version of 4.0.xx as long as the necessary features are working in it).