EQ cant connect to Server! (On Host computer!)

[Angelox]

It might be lagging too much due to this;

<!-- Only specify these two if you really think you need to. -->
<address>192.168.123.254</address>
<localaddress>127.0.0.1</localaddress>

I don't think this is needed - quote them out and see if it gets better;

<!-- Only specify these two if you really think you need to. -->
<!-- <address>192.168.123.254</address> -->
<!-- <localaddress>127.0.0.1</localaddress> -->

Also on your accounts table , minilogin_ip should have the address of the client machine you are logging from, and be sure you have no firewalls blocking your access.

[Arctura000]

mmm problems with zone.exe =( Crashes when i try to enter world! V_V

ill try to keep playing around.. btw Angelox thankyou for your kind reply, i tried what you said but it only seems that commenting out those two IP thingies only caused error messages in the console, saying 'needs ip address etc' or some such error.

Heres the three screens showing what happens when i try to enter the world from character select lol

[Arctura000]

ive found two more situations that cause Zone.exe errors... which normally shouldnt... so im not sure whats going on with my Zone.exe file if its working right...

If i modify the table for launcher_Zones and set the first value to read 'zones' instead of 'zone' (as it was set by default)...

The zone is noticed and loaded up. Shortly after however it crashes. Within a minute.
Not sure why, but then the console gets filled with auto-reboot attempts that spawns an infinite number of Zone.exe crash popup windows...

heres some screens






---------------------
SECONDLY Ive found that I CANNOT use Launch-5-zones.bat type methods for booting up static zones.
The zones are created, they work just fine, then crash quickly. Here is a screenshot of the zone.exe console just as it crashes so you can see what point its getting an error!



sooo.. im guessing it comes down to this... the problem with my Zone.exe crashing seems to be related to how it cant connect to the server? Ive tried varying my IP ranges in the config files from the network addy (192.etc.etc)
to 127.0.0.1....

could it be a port or something? I dont know how to open ports, im not on a router or anything =/
im so dumb! ><
anyone see what i dont see? Thanks SO much for all the help, it will work soon i know it! ALMOST THERE!

[Angelox]

Check your Firewalls on all machines involved. try without the firewall just to make sure it's not the problem.
If you're working from behind a router, you really don't need any other software firewall, as routers have their own firewalls that do not affect the LAN machines behind it.

EDIT
Also there's a "zone, zones" thing - look at your table "launcher" and make sure it says the same thing you are launching with the launcherexecutable.

[Arctura000]

UPDATE:

ok well i disabled Windows Firewall in Ctrl panel, disabled my Kerio personal firewall, unplugged myself from the internet completely, rebooted computer... disabled my antivirus and anyspyware software....

still crashes the zone.exe files.. .=/

confused still at this... i know there is a solution, hard part is just finding the problem ^_^

[Arctura000]

could it be my build of EQEmu is the wrong one? ...

i have 0.7.0.845 running... not sure which should be used for Titanium out of the box...