Blank Server Select Screen

[Angelox]

Make sure you don't have a hidden typo or other character in these two files. if you want , back them up, and copy/past my files, and try them out, you can rename things later. You would still have to change the ips to what ever yours are.

[punksatony]

Thanks Angelox

I had this same problem with the <address> in <world> and followed Angelox's advice and it worked

I copied and pasted the eqemulator.xml and loginserver.ini files and changed the 192 ip's to mine, <username> to root, <password> to what my password was, and <db> to peq as I was using it instead of angelox's.

Now I can log into the server select screen and it display's -=Angelox Classic Challenge=- (server status 0, is this right?), but when I try to connect to it, everything goes dark (like it's loading properly) then it just sits there for like 20 seconds then boots me back to the username/password screen...

How do I fix this?

Thanks for your help

[Angelox]

Make sure you have no software firewall mounted for now - make sure you have the right Ip Address in your database for your account: this would be in the account table at the minilogin_ip column < here, you need to put in the proper ip address from your client machine. There's an updater called "php_updater" that will do this for you. I have it posted at Rathe forums: http://eq.ismg.ch/mirkwood/news.php you have to be a member (no strings attached) in order to see and download from the downloads sections.
If you still have problems look into your c:\eqemu\logs\ and post any errors you see.

[punksatony]

Ok I updated the ip to my ip using the command prompt (checked that it worked with mysqlCC) and this is the result in world.exe during the "loading" while it's essentially waiting to boot me back to initial login screen...

After:
[05.18. - 16:20:56] [WORLD__ZONE] [6] Auto zone port configuration. Telling zone to use port 7005

It says this:
[05.18. - 16:21:19] [WORLD__CLIENT] New connection from 192.168.1.2:1618
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: First opcode 0x4dd0 did not match expected 0x2792
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: Tried patch 6.2_world, and it did not match.
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: First opcode 0x4dd0 did not match expected 0x2ec9
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: Tried patch 6.2_zone, and it did not match.
[05.18. - 16:21:19] [NET__IDENT_TRACE] 192.168.1.2:1618: First opcode matched 0x4dd0 and length matched 464
[05.18. - 16:21:19] [NET__IDENTIFY] Identified stream 192.168.1.2:1618 with signature Titanium_world
[05.18. - 16:21:19] [WORLD__CLIENT] New client from 192.168.1.2:1618
[05.18. - 16:21:19] [WORLD__CLIENT_ERR] : ID is 0. Is this server connected to minilogin?
[05.18. - 16:21:19] [WORLD__CLIENT_ERR] : Could not find a minilogin account, verify ip address logging into minilogin is the same that is in your account table.

Do I still need the php updater? I'm pretty sure that doing UPDATE blahblahblah WHERE blahblahblah; works too, right?

Any ideas or help is appreciated, thanks.

[Angelox]

you have set this ip ; "192.168.1.2" into your accounts database?

[punksatony]

yup, unless mysqlCC is lying to my eyes

I tried it on two separate "accounts" that I created in the database, both with same results

[Angelox]

Ok, do this - go to MySql site and download the MySql Query Browser /install it. You can then see if the IP is there.
I have to go out for about an hour, but will be back to help you deal with this.